Brian J. Murrell
2008-May-15 13:37 UTC
[asterisk-users] caller-id on X100P fails frequently
I have a Wildcard FXO: Wildcard X100P (clone) in my Asterisk (1.4.17) machine and as of late, Caller-ID on it seems to be failing more frequently than not. Sometimes I get "callerid.c:613 callerid_feed: Caller*ID failed checksum" sometimes it fails without even that. In Zapata.conf I have: usecallerid=yes cidsignalling=bell cidstart=ring I'm in Bell Canada land if that makes any difference. Any ideas on how to make it more reliable? b. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080515/c493e471/attachment.pgp
Brian J. Murrell wrote:> I have a Wildcard FXO: Wildcard X100P (clone) in my Asterisk (1.4.17) > machine and as of late, Caller-ID on it seems to be failing more > frequently than not. Sometimes I get "callerid.c:613 callerid_feed: > Caller*ID failed checksum" sometimes it fails without even that. >It can fail for one of three reasons on an X100P card: 1. The caller blocked their caller ID 2. Your gains are not set correctly in zapata.conf (I believe the one for caller id is rxgain). 3. You're using an X100P card...the caller ID hardware on it has always had problems, and some X100P/X101P cards are worse than others.> Any ideas on how to make it more reliable? >Try adjusting your gains, or replacing the card.