Hi all. Please, how can I configure an Asterisk PBX using an outbound proxy (that resolve NAT Traversal) I'm trying using the outboundproxy and outboundproxyport values in sip.conf but the PBX don't get registered on the outbound proxy side. I'm using SER + Asterisk with Jasomi outbound proxy solution, and I want the PBX to have a SIP trunk, but in SER i see the pbx sip user registered as sipuser at 192.168.1.x , not the SER ip. Any ideas please? Thanks in advance, Rosa. _________________________________________________________________ Blog your life in 3D with Windows Live Writer. http://www.windowslive.com/overview.html?ocid=TXT_TAGLM_Wave2_wl_writer_022008 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080418/351a8bcc/attachment.htm
On 18/04/2008, Rosa De Santis <rosadesantis at hotmail.com> wrote:> > Hi all. > > Please, how can I configure an Asterisk PBX using an outbound proxy (that > resolve NAT Traversal) > > I'm trying using the outboundproxy and outboundproxyport values in sip.conf > but the PBX don't get registered on the outbound proxy side. > > I'm using SER + Asterisk with Jasomi outbound proxy solution, and I want > the PBX to have a SIP trunk, but in SER i see the pbx sip user registered as > sipuser at 192.168.1.x , not the SER ip. > > Any ideas please? > Thanks in advance, Rosa.What "register =>" line are you using? Take a look at: http://bugs.digium.com/view.php?id=12474 Perhaps it will help? Regards, Steve