bilal ghayyad
2008-Feb-13 12:35 UTC
[asterisk-users] Telephone line signaling configuration in Egypt for FXO ports
Hi All;
I am facing a problem that the telephon line in Egypt
does not work with the FXO port at the digium card
(TDM22B), and I tried to play in loadzone and
defaultzone without any success, when we call to the
PBX it gives Busy signal sometimes, and othertimes it
rings without any response in Asterisk.
Is there any other configuration I have to do it to
resolve this issue? Any advise about a troubleshooting
method to resolve it?
Any help?
Regards
Bilal
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
Tzafrir Cohen
2008-Feb-13 12:44 UTC
[asterisk-users] Telephone line signaling configuration in Egypt for FXO ports
On Wed, Feb 13, 2008 at 04:35:43AM -0800, bilal ghayyad wrote:> Hi All; > > I am facing a problem that the telephon line in Egypt > does not work with the FXO port at the digium card > (TDM22B), and I tried to play in loadzone and > defaultzone without any success, when we call to the > PBX it gives Busy signal sometimes, and othertimes it > rings without any response in Asterisk. > > Is there any other configuration I have to do it to > resolve this issue? Any advise about a troubleshooting > method to resolve it?What version of zaptel? What do you have in zaptel.conf? -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
aymen warfalli
2008-Feb-13 12:54 UTC
[asterisk-users] Telephone line signaling configuration in Egypt for FXO ports
Hi Bilal could you post the TDM configuration file (zaptel.conf and zapata.conf) and how did you compile it Regards Ayman> Date: Wed, 13 Feb 2008 04:35:43 -0800> From: bilmar_gh at yahoo.com> To: asterisk-users at lists.digium.com> Subject: [asterisk-users] Telephone line signaling configuration in Egypt for FXO ports> > Hi All;> > I am facing a problem that the telephon line in Egypt> does not work with the FXO port at the digium card> (TDM22B), and I tried to play in loadzone and> defaultzone without any success, when we call to the> PBX it gives Busy signal sometimes, and othertimes it> rings without any response in Asterisk.> > Is there any other configuration I have to do it to> resolve this issue? Any advise about a troubleshooting> method to resolve it?> > Any help?> Regards> Bilal> > > ____________________________________________________________________________________> Never miss a thing. Make Yahoo your home page. > http://www.yahoo.com/r/hs> > _______________________________________________> -- Bandwidth and Colocation Provided by http://www.api-digital.com --> > asterisk-users mailing list> To UNSUBSCRIBE or update options visit:> http://lists.digium.com/mailman/listinfo/asterisk-users _________________________________________________________________ Helping your favorite cause is as easy as instant messaging.?You IM, we give. http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080213/8fde3012/attachment.htm
bilal ghayyad
2008-Feb-14 19:49 UTC
[asterisk-users] Telephone line signaling configuration in Egypt for FXO ports
Hi;
The PBX located in Egypt at Cairo city.
I am able to receive calls on the FXO ports at 3rd and
4th ports, but I am not able to place outgoing call
(it gives busy tone that coming from the service
provider, or it gives an voice message from the
service provider that the dialed number is wrong).
I am posting now the needed data that I was able to
collect it:
Asterisk version: Asterisk SVN-branch-1.4-r90231
localhost*CLI> show globals
ignorepat=9
TRUNKMSD=1
IAXINFO=guest
CONSOLE=Console/dsp
PSTNTRUNK=Zap/g1
TRUNK=Zap/g2
zap show status
Description Alarms
IRQ bpviol CRC4
Wildcard TDM400P REV I Board 1 OK 0
0 0
zap show cadences
r1: 125,125,2000,4000
r2: 250,250,500,1000,250,250,500,4000
r3: 125,125,125,125,125,4000
r4: 1000,500,2500,5000
zapata.conf:
[channels]
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=no
hidecallerid=no
callwaiting=yes
usecallingpres=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=no
relaxdtmf=yes
rxgain=15.0
txgain=15.0
group=1
channel => 3
callgroup=1
pickupgroup=1
immediate=yes
busydetect=yes
busycount=3
hanguponpolarityswitch=yes
callprogress=yes
context=Internal
signalling=fxo_ks
channel => 1,2
context=External
signalling=fxs_ks
channel => 3,4
zaptel.conf:
loadzone = uk
defaultzone=uk
fxoks=1,2
fxsks=3,4
Any advise?
Regards
Bilal
---------------------> Hi All;
>
> I am facing a problem that the telephon line in
Egypt> does not work with the FXO port at the digium card
> (TDM22B), and I tried to play in loadzone and
> defaultzone without any success, when we call to the
> PBX it gives Busy signal sometimes, and othertimes
it> rings without any response in Asterisk.
>
> Is there any other configuration I have to do it to
> resolve this issue? Any advise about a
troubleshooting> method to resolve it?
What version of zaptel? What do you have in
zaptel.conf?
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
bilal ghayyad
2008-Feb-14 19:53 UTC
[asterisk-users] Telephone line signaling configuration in Egypt for FXO ports
Hi; Sorry, I forgot to post the zapata version, it is 1.4 but I do not know the release and I do not know how to know the exact release. Regards Bilal ----------> Hi All; > > I am facing a problem that the telephon line inEgypt> does not work with the FXO port at the digium card > (TDM22B), and I tried to play in loadzone and > defaultzone without any success, when we call to the > PBX it gives Busy signal sometimes, and othertimesit> rings without any response in Asterisk. > > Is there any other configuration I have to do it to > resolve this issue? Any advise about atroubleshooting> method to resolve it?What version of zaptel? What do you have in zaptel.conf? ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping