asterisk users - Jun 2007 - Fwd: Problems with zap following 1.4.6 install

Hi,

Just upgrading to 1.4.6 from 1.2.  SIP  channels work OK, but not zap.
 I have a TDM400 w/ an FXO & 2 FXS.  I built libpri 1.4.0 first then
zaptel 1.4.3.  Menuselect had a * beside chan_zap and I loaded the
wcusb & wctdm before building asterisk.  In the CLI "zap show
channels" returns "no such command".  chan_zap.so exists in
/usr/lib/asterisk/modules.

What could be the problem & how to fix?

Thanks,
Hugh

zapata.conf
========[channels]

;
language=en
context=outgoing-PBX
signalling=fxo_ks
threewaycalling=yes
transfer=yes
mailbox = 100 at HOME,101 at default,102 at default
group=1

callgroup=1

pickupgroup=1,2

channel=>1
;
language=en
context=ils-outgoing-PBX
signalling=fxo_ks
threewaycalling=yes
transfer=yes
mailbox = 200 at HOME
group=1

callgroup=2

pickupgroup=1,2

channel=>2
;
;******************************************
; Incoming channels
;******************************************
usedistinctiveringdetection=yes
dring1=384,327,0
dring1context=ils-incoming
;
dring2=0,0,0
dring2context=smith-incoming
;
language=en
context=incoming-zap
signalling=fxs_ks
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
transfer=yes

;rxgain=5%
group=2

hugolivude wrote:
> Just upgrading to 1.4.6 from 1.2.  SIP  channels work OK, but not zap.
>  I have a TDM400 w/ an FXO & 2 FXS.  I built libpri 1.4.0 first then
> zaptel 1.4.3.  Menuselect had a * beside chan_zap and I loaded the
> wcusb & wctdm before building asterisk.  In the CLI "zap show
> channels" returns "no such command".  chan_zap.so exists in
> /usr/lib/asterisk/modules.
> 
> What could be the problem & how to fix?
What output do you get if you run "module unload chan_zap.so" and then
"module
load chan_zap.so" ?

-- 
Russell Bryant
Software Engineer
Digium, Inc.