asterisk users - Jun 2007 - Needed changes in Asterisk to change the SIP port to 5062

Hi Friends,
 I want to use 5062 port for SIP protocol. I made the below modifications in my
server to use 5062 port.
 Polycom phone: port=5062
 Trunk settings: port=5062
 sip.conf: bindaddr=5062
 Extension configuration details: 5062
 Our VoIP provider told me that they are allowing the SIP traffic through 5060
to 5064. I observed on my server console that my server is registered with our
VoIP provider with 5062 port. But, I am unable to make outgoing calls.
 Do I need to modify any other settings in Asterisk?
 Look forward to your response. Thank you.
 Regards,
 Chandra.

       
---------------------------------
Need a vacation? Get great deals to amazing places on Yahoo! Travel. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070606/295ce4b1/attachment.htm

Crazy Boy wrote:
>  sip.conf: bindaddr=5062
bindaddr=0.0.0.0  ; IP address to bind to (0.0.0.0 binds to all)
bindport=5062     ; UDP Port to bind to (SIP standard port is 5060)


  Philipp

-- 
amooma GmbH - Bachstr. 126 - 56566 Neuwied - http://www.amooma.de
     Let's use IT to solve problems and not to create new ones.
           Asterisk? -> http://www.das-asterisk-buch.de

Gesch?ftsf?hrer: Stefan Wintermeyer
Handelsregister: Neuwied B 14998

if it is properly into Trunk, I mean into extensions.conf then it shud work
properly

On 6/6/07, Crazy Boy <crazymoonboy@yahoo.com>
wrote:
>
> Hi Friends,
> I want to use 5062 port for SIP protocol. I made the below modifications
> in my server to use 5062 port.
> Polycom phone: port=5062
> Trunk settings: port=5062
> sip.conf: bindaddr=5062
> Extension configuration details: 5062
> Our VoIP provider told me that they are allowing the SIP traffic through
> 5060 to 5064. I observed on my server console that my server is registered
> with our VoIP provider with 5062 port. But, I am unable to make outgoing
> calls.
> Do I need to modify any other settings in Asterisk?
> Look forward to your response. Thank you.
> Regards,
> Chandra.
>
> ------------------------------
> Need a vacation? Get great deals to amazing places
>
<http://us.rd.yahoo.com/evt=48256/*http://travel.yahoo.com/;_ylc=X3oDMTFhN2hucjlpBF9TAzk3NDA3NTg5BHBvcwM1BHNlYwNncm91cHMEc2xrA2VtYWlsLW5jbQ-->on
> Yahoo! Travel.
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070606/258529d4/attachment.htm

In sip.conf it should be bindport=5062

On 06/06/07, Crazy Boy <crazymoonboy@yahoo.com>
wrote:
> Hi Friends,
> I want to use 5062 port for SIP protocol. I made the below modifications in
> my server to use 5062 port.
> Polycom phone: port=5062
>  Trunk settings: port=5062
>  sip.conf: bindaddr=5062
>  Extension configuration details: 5062
> Our VoIP provider told me that they are allowing the SIP traffic through
> 5060 to 5064. I observed on my server console that my server is registered
> with our VoIP provider with 5062 port. But, I am unable to make outgoing
> calls.
> Do I need to modify any other settings in Asterisk?
> Look forward to your response. Thank you.
> Regards,
>  Chandra.
>
>  ________________________________
> Need a vacation? Get great deals to amazing places on Yahoo! Travel.
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>