thr3ads.net - asterisk users - [asterisk-users] Call to an arbitrary outbound number by asterisk [May 2007]

If this information is useful, please help other people find it:
Share via:

Arpit Mehta

2007-May-17 23:31 UTC

[asterisk-users] Call to an arbitrary outbound number by asterisk

Hi,

I have a strange problem. I have a TE110p digium card.

I want to dial 19173995791 when any incoming call comes in. What is
happening is that when I dial 19173-995791. Asterisk picks up the first 5
digits assuming it is the extension and appends 212-85 (here in the
university most numbers start with this) in front . Therefore I get
connected to some random number 212-85-(19173) (where the voicemail is
running).
I cannot understand why asterisk is doing this whereas my dialplan says it
needs to connect to other number
"exten => _.,1,Dial(Zap/g1/19173995791)"

Also any idea if this is an Asterisk problem or a telco problem. Any
help/hints/suggestions would be most welcome

Here are my files.

zapata.conf
context=incoming
switchtype=national
signalling=pri_cpe
group=1
channel=>1-23

extension.conf
[incoming]
exten => _.,1,Dial(Zap/g1/19173995791)

######### I have added this line in the dialplan is because I want it to
match the last 5 digit and simply dial the number 19173995791 such that a
call leg is established between the calling party and the number 19173995791

CLI debug information
-- Requested transfer capability: 0x00 - SPEECH
-- Called g1/19173995791
-- Zap/1-1 is proceeding passing it to Zap/23-1
-- Zap/1-1 is making progress passing it to Zap/23-1

############### The call keeps ringing for sometime then it goes to
voicemail. The message comes when the voicemail start. Note that I have not
setup any voice mail

-- Zap/1-1 answered Zap/23-1

############### Goes to the voicemail
-- Native bridging Zap/23-1 and Zap/1-1

-- Channel 0/23, span 1 got hangup request
-- Hungup 'Zap/1-1'
== Spawn extension (incoming, 17689, 1) exited non-zero on 'Zap/23-1'
-- Hungup 'Zap/23-1'

Regards

--
Arpit Mehta
Graduate Student
Department of Computer Science
Columbia University

Tel: 1-646-387-5998
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070517/15495b95/attachment.htm

Yuan LIU

2007-May-17 23:49 UTC

head link

[asterisk-users] Call to an arbitrary outbound number by asterisk

>From: "Arpit Mehta" <am2866@columbia.edu>
>Date: Fri, 18 May 2007 02:31:22 -0400
>
>Hi,
>
>I have a strange problem. I have a TE110p digium card.
>
>I want to dial 19173995791 when any incoming call comes in.  What is
>happening is that when I dial 19173-995791. Asterisk picks up the first 5
>digits assuming it is the extension and appends 212-85 (here in the
>university most numbers start with this) in front . Therefore I get
>connected to some random number 212-85-(19173) (where the voicemail is
>running).
>I cannot understand why asterisk is doing this whereas my dialplan says it
>needs to connect to other number
>   "exten => _.,1,Dial(Zap/g1/19173995791)"
>
>Also any idea if this is an Asterisk problem or a telco problem. Any
>help/hints/suggestions would be most welcome
If you are sure that your university doesn't have a PBX, that's a telco 
problem.  Looks like that the switch has a dial plan that does not allow you 
to dial this sequence directly and interpret all dialed sequence as a local 
call. (This is usually the function of a PBX but ...)  What is this number 
19173995791, any way? (and what is 212-85?) If you attach a phone directly 
to a channel bank, would you be able to dial this sequence?

Yuan Liu
>Here are my files.
>
>zapata.conf
>context=incoming
>switchtype=national
>signalling=pri_cpe
>group=1
>channel=>1-23
>
>extension.conf
>[incoming]
>exten => _.,1,Dial(Zap/g1/19173995791)
>
>######### I have added this line in the dialplan is because I want it to
>match the  last 5 digit and simply dial the number 19173995791 such that a
>call leg is established between the calling party and the number 
>19173995791
>
>
>
>CLI debug information
>-- Requested transfer capability: 0x00 - SPEECH
>    -- Called g1/19173995791
>    -- Zap/1-1 is proceeding passing it to Zap/23-1
>    -- Zap/1-1 is making progress passing it to Zap/23-1
>
>############### The call keeps ringing for sometime then it goes to
>voicemail. The message comes when the voicemail start. Note that I have not
>setup any voice mail
>
>    -- Zap/1-1 answered Zap/23-1
>
>############### Goes to the voicemail
>    -- Native bridging Zap/23-1 and Zap/1-1
>
>    -- Channel 0/23, span 1 got hangup request
>    -- Hungup 'Zap/1-1'
>  == Spawn extension (incoming, 17689, 1) exited non-zero on
'Zap/23-1'
>    -- Hungup 'Zap/23-1'
>
>
>Regards
>
>--
>Arpit Mehta
>Graduate Student
>Department of Computer Science
>Columbia University
>
>Tel: 1-646-387-5998

Don Kelly

2007-May-21 21:38 UTC

head link

[asterisk-users] Call to an arbitrary outbound number by asterisk

If I had to make a wild guess, I'd expect that when you make a call
off-campus you must dial an access code first.

 

Looking at columbia.edu, I see that you're expected to dial '93' for
a local
number.

 

1+xxxx is a number in the Centrex dial plan for the Morningside campus.

 

http://www.columbia.edu/acis/telecom/tutorial.html#dialing

 

Asterisk is dialing all 10 digits, just as you expected it to.

 

Your dial plan is not prepending the '93,' so the campus
pbx/centrex/switch/whatever thinks you're dialing an on-campus number and
uses just the first five digits to complete the call.

 

As '917' is a local call, is the '1' required?

  --Don

Don Kelly
CT Magic

  _____  

From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Arpit Mehta
Sent: Friday, May 18, 2007 1:31 AM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Call to an arbitrary outbound number by asterisk

 

Hi,

I have a strange problem. I have a TE110p digium card. 

I want to dial 19173995791 when any incoming call comes in.  What is
happening is that when I dial 19173-995791. Asterisk picks up the first 5
digits assuming it is the extension and appends 212-85 (here in the
university most numbers start with this) in front . Therefore I get
connected to some random number 212-85-(19173) (where the voicemail is
running). 
I cannot understand why asterisk is doing this whereas my dialplan says it
needs to connect to other number
   "exten => _.,1,Dial(Zap/g1/19173995791)"

Also any idea if this is an Asterisk problem or a telco problem. Any
help/hints/suggestions would be most welcome

Here are my files. 

zapata.conf
context=incoming
switchtype=national
signalling=pri_cpe 
group=1
channel=>1-23

extension.conf
[incoming]
exten => _.,1,Dial(Zap/g1/19173995791)


######### I have added this line in the dialplan is because I want it to
match the  last 5 digit and simply dial the number 19173995791 such that a
call leg is established between the calling party and the number 19173995791



CLI debug information 
-- Requested transfer capability: 0x00 - SPEECH
    -- Called g1/19173995791
    -- Zap/1-1 is proceeding passing it to Zap/23-1
    -- Zap/1-1 is making progress passing it to Zap/23-1 

############### The call keeps ringing for sometime then it goes to
voicemail. The message comes when the voicemail start. Note that I have not
setup any voice mail

    -- Zap/1-1 answered Zap/23-1 

############### Goes to the voicemail 
    -- Native bridging Zap/23-1 and Zap/1-1

    -- Channel 0/23, span 1 got hangup request
    -- Hungup 'Zap/1-1'
  == Spawn extension (incoming, 17689, 1) exited non-zero on 'Zap/23-1'
    -- Hungup 'Zap/23-1'



Regards

-- 
Arpit Mehta
Graduate Student
Department of Computer Science 
Columbia University

Tel: 1-646-387-5998 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070521/300af0d4/attachment.htm

Seemingly Similar Threads

Search for more maybe matching threads

asterisk users - May 2007 - Call to an arbitrary outbound number by asterisk

[asterisk-users] Call to an arbitrary outbound number by asterisk

[asterisk-users] Call to an arbitrary outbound number by asterisk

[asterisk-users] Call to an arbitrary outbound number by asterisk

Seemingly Similar Threads