Are you sure that you set the T1/E1 jumpers on the board correctly for
E1 mode?
Matthew Fredrickson
On May 15, 2007, at 1:23 PM, Matt Brown wrote:
> Hi,
>
> I have purchased a TE212P (Dual Span) Digium card and have compiled
> Zaptel 1.4.2.1 and LibPri 1.4.0 and Asterisk 1.4.4
>
> ztcfg -vv shows this:
>
> Zaptel Version: 1.4.2.1
> Echo Canceller: MG2
> Configuration
> =====================>
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
> Channel map:
>
> Channel 01: Clear channel (Default) (Slaves: 01)
> Channel 02: Clear channel (Default) (Slaves: 02)
> Channel 03: Clear channel (Default) (Slaves: 03)
> Channel 04: Clear channel (Default) (Slaves: 04)
> Channel 05: Clear channel (Default) (Slaves: 05)
> Channel 06: Clear channel (Default) (Slaves: 06)
> Channel 07: Clear channel (Default) (Slaves: 07)
> Channel 08: Clear channel (Default) (Slaves: 08)
> Channel 09: Clear channel (Default) (Slaves: 09)
> Channel 10: Clear channel (Default) (Slaves: 10)
> Channel 11: Clear channel (Default) (Slaves: 11)
> Channel 12: Clear channel (Default) (Slaves: 12)
> Channel 13: Clear channel (Default) (Slaves: 13)
> Channel 14: Clear channel (Default) (Slaves: 14)
> Channel 15: Clear channel (Default) (Slaves: 15)
> Channel 16: D-channel (Default) (Slaves: 16)
> Channel 17: Clear channel (Default) (Slaves: 17)
> Channel 18: Clear channel (Default) (Slaves: 18)
> Channel 19: Clear channel (Default) (Slaves: 19)
> Channel 20: Clear channel (Default) (Slaves: 20)
> Channel 21: Clear channel (Default) (Slaves: 21)
> Channel 22: Clear channel (Default) (Slaves: 22)
> Channel 23: Clear channel (Default) (Slaves: 23)
> Channel 24: Clear channel (Default) (Slaves: 24)
> Channel 25: Clear channel (Default) (Slaves: 25)
> Channel 26: Clear channel (Default) (Slaves: 26)
> Channel 27: Clear channel (Default) (Slaves: 27)
> Channel 28: Clear channel (Default) (Slaves: 28)
> Channel 29: Clear channel (Default) (Slaves: 29)
> Channel 30: Clear channel (Default) (Slaves: 30)
> Channel 31: Clear channel (Default) (Slaves: 31)
> Channel 32: Clear channel (Default) (Slaves: 32)
> Channel 33: Clear channel (Default) (Slaves: 33)
> Channel 34: Clear channel (Default) (Slaves: 34)
> Channel 35: Clear channel (Default) (Slaves: 35)
> Channel 36: Clear channel (Default) (Slaves: 36)
> Channel 37: Clear channel (Default) (Slaves: 37)
> Channel 38: Clear channel (Default) (Slaves: 38)
> Channel 39: Clear channel (Default) (Slaves: 39)
> Channel 48: D-channel (Default) (Slaves: 48)
>
> 40 channels configured.
>
> /etc/zaptel.conf consists of:
>
> # Config for a UK Euro-ISDN line
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15,17-31
> dchan=16
> span=2,1,0,ccs,hdb3,crc4
> bchan=32-39
> dchan=48
> loadzone=uk
> defaultzone=uk
>
> and /etc/asterisk/zapata.conf consists of:
>
> [channels]
> callprogress=no
> usecallerid=yes
> language=en
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> immediate=no
> pridialplan=unknown
> overlapdial=yes
> signalling=pri_cpe
> switchtype=euroisdn
> usecallingpres=yes
> group=1
> context=incoming
> busydetect=no
> resetinterval=never
> channels => 1-15,17-31,32-39
>
> The red light on Span 1 & Span is flashing and both are showing RED
> alarms ??
>
> What am I doing wrong ?
>
> I have successfully built other Asterisk boxes with different cards in
> without problems - this is an upgrade for a client.
>
> It is being connected to a UK ISDN30 circuit at the weekend 1 with 30
> lines the other with 8 lines (38 Lines in total)
>
> Any help would be really, really appreciated.
>
> Regards
>
> Matt Brown
> matt@mbrown.co.uk
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users