HI all, Does some one can give me his configuration (zapta.conf, zaptel.conf, sample for extensions.conf) for TDM410P card or similar (1/2/3/4 BRI card) Thanks in advance. Cheers, Alex
Hello, Here is my config: - /etc/zaptel.conf ===========# T1 Configuration span=1,1,0,esf,b8zs bchan=1-23 dchan=24 span=2,1,0,esf,b8zs bchan=25-47 dchan=48 span=3,1,0,esf,b8zs bchan=49-71 dchan=72 span=4,1,0,esf,b8zs bchan=73-95 dchan=96 /etc/asterisk/zapata-channels.conf <<You need to #include zapata-channels.conf in your zapata.conf>> =======================; signalling = pri_cpe is USER ; signalling = pri_net is NETWORK group = 1 switchtype = national signalling = pri_net context = from-zaptel channel => 1-23 group = 2 switchtype = national signalling = pri_net context = from-zaptel channel => 25-47 group = 3 switchtype = national signalling = pri_net context = from-zaptel channel => 49-71 group = 4 switchtype = national signalling = pri_cpe context = from-zaptel channel => 73-95 I use FreePBX as my front-end to route calls... so I just assign the trunk groups which I want to use... Regards, Nitesh Alexandre VERNIOL wrote:> HI all, > > Does some one can give me his configuration (zapta.conf, zaptel.conf, > sample for extensions.conf) for TDM410P card or similar (1/2/3/4 BRI > card) > > Thanks in advance. > > Cheers, > > > Alex > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Great !!! Thanks a lot !! Nitesh Divecha a ?crit :> Hello, > > Here is my config: - > > /etc/zaptel.conf > ===========> # T1 Configuration > span=1,1,0,esf,b8zs > bchan=1-23 > dchan=24 > > span=2,1,0,esf,b8zs > bchan=25-47 > dchan=48 > > span=3,1,0,esf,b8zs > bchan=49-71 > dchan=72 > > span=4,1,0,esf,b8zs > bchan=73-95 > dchan=96 > > /etc/asterisk/zapata-channels.conf <<You need to #include > zapata-channels.conf in your zapata.conf>> > =======================> ; signalling = pri_cpe is USER > ; signalling = pri_net is NETWORK > > group = 1 > switchtype = national > signalling = pri_net > context = from-zaptel > channel => 1-23 > > group = 2 > switchtype = national > signalling = pri_net > context = from-zaptel > channel => 25-47 > > group = 3 > switchtype = national > signalling = pri_net > context = from-zaptel > channel => 49-71 > > group = 4 > switchtype = national > signalling = pri_cpe > context = from-zaptel > channel => 73-95 > > I use FreePBX as my front-end to route calls... so I just assign the > trunk groups which I want to use... > > Regards, > Nitesh > > > > > > > Alexandre VERNIOL wrote: >> HI all, >> >> Does some one can give me his configuration (zapta.conf, zaptel.conf, >> sample for extensions.conf) for TDM410P card or similar (1/2/3/4 BRI >> card) >> >> Thanks in advance. >> >> Cheers, >> >> >> Alex >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >