hi all, I wouldlike use an agi script in order to send some information at an othe server, so use an agi. But I wouldlike use this agi after or just front blind transfer or attended transfer. it is possible to execute an agi after or front a transfer via features.conf or an other way? thanks for your answer -- sylvain Garcia
In some situations you could execute agi by just adding it to an extension on the other server that gets the transferred call. The associated information could be passed by various means. That decision would be based on criteria like the frequency and volume of these transfers. A simple prototype setup could be done using nfs. The agi on server A writes things to a file and then transfers the call to an extension on server B. That extension executes agi which reads the file and further call processing is based on the file contents. Sylvain Garcia wrote:> hi all, > > I wouldlike use an agi script in order to send some information at an > othe server, so use an agi. > But I wouldlike use this agi after or just front blind transfer or > attended transfer. > it is possible to execute an agi after or front a transfer via > features.conf or an other way? > > thanks for your answer > > -- > sylvain Garcia > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users