Hi All Trying to install Digium B410P on Trixbox 2. After initializing card driver and asterisk i m getting follow message asterisk shows no port. Would be kind enough if somebody help me. Regards Farooq #misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib. -> childcnt: 2 * Port NOT useable for PBX -------- Port 2: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib. -> childcnt: 2 * Port NOT useable for PBX -------- Port 3: NT-mode BRI S/T interface port (for phones) -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib. * Port NOT useable for PBX -------- Port 4: NT-mode BRI S/T interface port (for phones) -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib. * Port NOT useable for PBX --
Farooq Ahmed wrote:> Hi All > Trying to install Digium B410P on Trixbox 2. After initializing card driver and asterisk i m getting > follow message asterisk shows no port. > Would be kind enough if somebody help me. > Regards > Farooq > > #misdnportinfo > > Port 1: TE-mode BRI S/T interface line (for phone lines) > -> Protocol: DSS1 (Euro ISDN) > -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib. > -> childcnt: 2 > * Port NOT useable for PBX > -------- > Port 2: TE-mode BRI S/T interface line (for phone lines) > -> Protocol: DSS1 (Euro ISDN) > -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib. > -> childcnt: 2 > * Port NOT useable for PBX > -------- > Port 3: NT-mode BRI S/T interface port (for phones) > -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib. > * Port NOT useable for PBX > -------- > Port 4: NT-mode BRI S/T interface port (for phones) > -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT lib. > * Port NOT useable for PBXHi, in /etc/misdn-init.conf, switch the mode to te_ptmp= or something. -- thanks, Yusuf
Yes i tried but nothing change Regards Farooq Quoting yusuf <yusuf@ecntelecoms.com>:> Farooq Ahmed wrote: > > Hi All > > Trying to install Digium B410P on Trixbox 2. After initializing > card driver and asterisk i m getting > > follow message asterisk shows no port. > > Would be kind enough if somebody help me. > > Regards > > Farooq > > > > #misdnportinfo > > > > Port 1: TE-mode BRI S/T interface line (for phone lines) > > -> Protocol: DSS1 (Euro ISDN) > > -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE > lib. > > -> childcnt: 2 > > * Port NOT useable for PBX > > -------- > > Port 2: TE-mode BRI S/T interface line (for phone lines) > > -> Protocol: DSS1 (Euro ISDN) > > -> Layer 4 protocol 0x04000001 is detected, but not allowed for TE > lib. > > -> childcnt: 2 > > * Port NOT useable for PBX > > -------- > > Port 3: NT-mode BRI S/T interface port (for phones) > > -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT > lib. > > * Port NOT useable for PBX > > -------- > > Port 4: NT-mode BRI S/T interface port (for phones) > > -> Layer 2 protocol 0x02000002 is detected, but not allowed for NT > lib. > > * Port NOT useable for PBX > Hi, > > in /etc/misdn-init.conf, switch the mode to te_ptmp= or something. > > -- > thanks, > Yusuf > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >--