asterisk users - Mar 2007 - AsteriskNow Beta 4 with T1 Cards?

I would like to use AsteriskNow with a T1 PRI. I know that AsteriskNow will
not auto-detect the digital cards but is there a way to manually configure
AsteriskNow so it will be able to see and use the trunks? 

 

Thanks,

-Brian

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070323/4944b8c9/attachment.htm

Thanks for the quick response but getting the cards to work with Asterisk is
not the problem - what I want is for them to show up in asterisk-gui.

For example, I have a little test system sitting here. It has Fedora6,
Zaptel/Libpri/Asterisk 1.4 and asterisk-gui. It has an analog card installed
but the gui can not detect the analog ports. So I can not use those ports
from asterisk-gui. I can manually configure them just fine and they work -
but I can not access them in the asterisk-gui. I know this is not a digital
card but it is the same problem - asterisk-gui can not detect the card so I
need to somehow force the card into the configuration.

Is there a way to manually configure the system so that ports that the gui
normally could not detect would be available?

Thanks again,
-Brian

-----Original Message-----
From: david.cantera@IBSOneCall.com [mailto:david.cantera@IBSOneCall.com] 
Sent: Friday, March 23, 2007 10:45 AM
To: balexander@visionpointsystems.com; asterisk-users@lists.digium.com
Subject: RE: [asterisk-users] AsteriskNow Beta 4 with T1 Cards?

brian,
try these links:

http://www.voip-info.org/wiki/view/Asterisk+config+zapata.conf
http://www.voip-info.org/wiki/view/Asterisk+PRI
daveC

On Fri, Mar 23, 2007 at 11:09:54AM -0400, Brian K. Alexander,  Jr. (Vision Point
Systems) wrote:
> Thanks for the quick response but getting the cards to work with Asterisk
is
> not the problem - what I want is for them to show up in asterisk-gui.
> 
> For example, I have a little test system sitting here. It has Fedora6,
> Zaptel/Libpri/Asterisk 1.4 and asterisk-gui. It has an analog card
installed
> but the gui can not detect the analog ports. So I can not use those ports
> from asterisk-gui. I can manually configure them just fine and they work -
> but I can not access them in the asterisk-gui. I know this is not a digital
> card but it is the same problem - asterisk-gui can not detect the card so I
> need to somehow force the card into the configuration.
> 
> Is there a way to manually configure the system so that ports that the gui
> normally could not detect would be available?
The asterisk-gui uses /etc/asterisk/zapscan.conf, which is detected at
boot time (by zapscan which is run from /etc/init.d/zaptel)

As genzaptelconf is now able to replace the zapscan utility of the
asterisk-gui, and also to detect digital spans and give them resonable
values in many cases, I wonder if it can do the job for you.

Currently, genzaptelconf -z will still pront nothing for digital spans.
Is there anything that you can add to /etc/asterisk/zapscan.conf to make
the digital span available?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir@jabber.org
+972-50-7952406           mailto:tzafrir.cohen@xorcom.com       
http://www.xorcom.com  iax:guest@local.xorcom.com/tzafrir