Hi,
I received my shiny card this morning but I am having problems getting a
analogue phone to work. In zapata.conf I have :-
Code:
[channels]
usecallerid=no
hidecallerid=no
callwaiting=no
threewaycalling=no
transfer=no
echocancel=yes
echotraining=yes
immediate=no
context=internal
signalling=fxo_ks
channel => 1
context=incoming
signalling=fxs_ks
channel => 4
and for my extensions.conf I have :-
Code:
[incoming]
exten => s,1,GoToIfTime(17:00-09:00\mon-fri\*\*?outofhours|s,1)
exten => s,2,GoToIfTime(*\sat-sun\*\*?outofhours|s,1)
exten => s,3,Answer()
exten => s,4,Dial(Zap/1,20)
exten => s,5,Playback(cybermog)
exten => s,6,VoiceMail(1234@incoming,s)
exten => s,7,Hangup()
[outofhours]
exten => s,1,Answer()
exten => s,2,Playback(cybermog)
exten => s,3,VoiceMail(1234@incoming,s)
exten => s,4,Hangup()
[internal]
include => outbound-local
[outbound-local]
exten => _9NXXXXXX,1,Dial(${TRUNK}/${EXTEN:1})
exten => _9NXXXXXX,2,Congestion()
exten => _9NXXXXXX,102,Congestion()
What happens is that if I dial the FXO module, it picks up the call and fails to
pass it to the analogue (zap/1) phone. If I just try picking up the analogue
receiver the phone just rings and rings.
What have I done wrong ?
--
--[ UxBoD ]--
// PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import"
// Fingerprint: 543A E778 7F2D 98F1 3E50 9C1F F190 93E0 E8E8 0CF8
// Keyserver: www.keyserver.net Key-ID: 0xE8E80CF8
// SIP:uxbod@sip.splatnix.net
--
This message has been scanned for viruses and dangerous content by MailScanner,
and is
believed to be clean.