I have an X100P which I have set up as per the guidelines: http://www.x100p.com/support/doc/quick_start_fxo.php The card is recognized by the system: "Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration ===================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured." However when I run zttools it says its status is red, which my understanding of is that it has not detected the line. I am in the uk and using a standard BT line (with ADSL). Any suggestions? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070126/4b251f1b/attachment.htm
On Fri, Jan 26, 2007 at 08:42:36PM -0000, Charlie Grosvenor wrote:> I have an X100P which I have set up as per the guidelines: > > http://www.x100p.com/support/doc/quick_start_fxo.php > > The card is recognized by the system: > > "Zaptel Version: 1.4.0 > > Echo Canceller: MG2 > > Configuration > > =====================> > > > > > Channel map: > > > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > > > 1 channels configured." > > > > However when I run zttools it says its status is red, which my > understanding of is that it has not detected the line. I am in the uk > and using a standard BT line (with ADSL). Any suggestions?Is the line plugged in? Can you connect a standard phone to the same line? -- Tzafrir Cohen icq#16849755 jabber:tzafrir@jabber.org +972-50-7952406 mailto:tzafrir.cohen@xorcom.com http://www.xorcom.com iax:guest@local.xorcom.com/tzafrir
Yes the line is connected, a standard phone works fine when connected to the line. Thanks -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Tzafrir Cohen Sent: 26 January 2007 23:45 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] X100P - zttools says red status On Fri, Jan 26, 2007 at 08:42:36PM -0000, Charlie Grosvenor wrote:> I have an X100P which I have set up as per the guidelines: > > http://www.x100p.com/support/doc/quick_start_fxo.php > > The card is recognized by the system: > > "Zaptel Version: 1.4.0 > > Echo Canceller: MG2 > > Configuration > > =====================> > > > > > Channel map: > > > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > > > 1 channels configured." > > > > However when I run zttools it says its status is red, which my > understanding of is that it has not detected the line. I am in the uk > and using a standard BT line (with ADSL). Any suggestions?Is the line plugged in? Can you connect a standard phone to the same line? -- Tzafrir Cohen icq#16849755 jabber:tzafrir@jabber.org +972-50-7952406 mailto:tzafrir.cohen@xorcom.com http://www.xorcom.com iax:guest@local.xorcom.com/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users