Wayne Jensen
2007-Jan-25 11:31 UTC
[asterisk-users] unable to create channel, in strange state, exited non-zero, etc.
I'm having various issues that may or may not be related to each other (I'm pretty sure they are). We've had this system for a year now (quad T1 card, right now we have 1 T1 coming in, 2 going out to channel banks) and we've had intermittent "ghost" calls--it appears that what is happening is a call is made, the number being called is disconnected/busy/answering machine/whatever, we hang up and the phone starts ringing. Answer the phone and it's that same call still not hung up. That problem hadn't happened very often so we didn't worry too much about it. It was just a little annoying. We had pretty low traffic on the system though and were mostly still using our old phone system. On Monday I switched so that all of the phones are going through this Asterisk system and Tuesday morning we started having major problems. Calls were being dropped in the middle of the call. At times, everyone who was trying to make a call would get a "fast busy" and "Unable to create channel of type 'Zap'" showed up in the logs. Yesterday we had various Red and Yellow alarms. Here are a few lines from the logs: Yesterday: Jan 24 10:01:47 WARNING[12435] chan_zap.c: Detected alarm on channel 24: Red Alarm Jan 24 10:02:11 NOTICE[25813] app_dial.c: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion) Today: Jan 25 08:39:23 WARNING[6863] chan_zap.c: zt hook failed: Device or resource busy Jan 25 08:40:32 WARNING[932] chan_zap.c: Ring/Off-hook in strange state 6 on channel 2>From console:== Spawn extension (phones-agent, 1510272xxxx, 2) exited non-zero on 'Zap/95-1' -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070125/6f55d6f4/attachment.htm
Wayne Jensen
2007-Feb-02 10:43 UTC
[asterisk-users] Re: unable to create channel, in strange state, exited non-zero, etc.
On 1/25/07, Wayne Jensen <wayne@srmarketresearch.com> wrote:> I'm having various issues that may or may not be related to each other (I'm > pretty sure they are). We've had this system for a year now (quad T1 card, > right now we have 1 T1 coming in, 2 going out to channel banks) and we've > had intermittent "ghost" calls--it appears that what is happening is a call > is made, the number being called is disconnected/busy/answering > machine/whatever, we hang up and the phone starts ringing. Answer the phone > and it's that same call still not hung up. > > That problem hadn't happened very often so we didn't worry too much about > it. It was just a little annoying. We had pretty low traffic on the system > though and were mostly still using our old phone system. > > On Monday I switched so that all of the phones are going through this > Asterisk system and Tuesday morning we started having major problems. Calls > were being dropped in the middle of the call. At times, everyone who was > trying to make a call would get a "fast busy" and "Unable to create channel > of type 'Zap'" showed up in the logs. > > Yesterday we had various Red and Yellow alarms. Here are a few lines from > the logs: > > Yesterday: > Jan 24 10:01:47 WARNING[12435] chan_zap.c: Detected alarm on channel 24: Red > Alarm > Jan 24 10:02:11 NOTICE[25813] app_dial.c: Unable to create channel of type > 'Zap' (cause 34 - Circuit/channel congestion) > > Today: > Jan 25 08:39:23 WARNING[6863] chan_zap.c: zt hook failed: Device or resource > busy > Jan 25 08:40:32 WARNING[932] chan_zap.c: Ring/Off-hook in strange state 6 on > channel 2 > > From console: > == Spawn extension (phones-agent, 1510272xxxx, 2) exited non-zero on > 'Zap/95-1' >Still having problems here. Today there was a red alarm on channels 1-24 (the T1 going out to the telco) and all calls were dropped. This has also happened several other times. We've been using this T1 without the asterisk box for over a year now and this has never happened before, and even now if I disconnect the asterisk box and run the line straight into a channel bank it doesn't happen. I've googled and googled and can't figure it out. E&M Wink signalling B8ZS/ESF Thanks! Wayne