asterisk users - Nov 2006 - chan_misdn on a junghanns card

Hello,

I am trying to use chan_misdn on a junghanns QuadBRI card. 

Using the latest install-misdn-mqueue from beronet, all installation 
went well apparently. However when I try to load the card it is not 
recognized:

	# modprobe hfcmulti type=0x04 protocol=0x12,0x12,0x2,0x2
layermask=0x3,0x3,0xf,0xf
	 Loading only hfcmulti
	 -----------------------------------------
	  Loading module(s) for your misdn-cards:
	  -----------------------------------------
	  modprobe --ignore-install hfcmulti type=0x4 protocol=0x12,0x12,0x2,0x2 
	  layermask=0x3,0x3,0xf,0xf poll=64 debug=0

	Nov 29 11:42:45 pyrrhus kernel: 0 devices registered

Trying the same thing on a hfcpci card works and I can receive call with 
chan_misdn.

Is there something specific to junghanns cards?

On Wed, Nov 29, 2006 at 11:45:50AM +0100, Louis-David Mitterrand
wrote:
> Hello,
> 
> I am trying to use chan_misdn on a junghanns QuadBRI card. 
> 
> Using the latest install-misdn-mqueue from beronet, all installation 
> went well apparently. However when I try to load the card it is not 
> recognized:
This card is a new-style QuadBRI v 2.0 (with hardware watchdog according 
to KP Junghanns).

Apparently this new card is not recognized by mISDN drivers.

I tried using an old QuadBRI and the modules load fine.