Scott Pinhorne
2006-Oct-30 04:32 UTC
[asterisk-users] RT Problem: Asterisk & Session Border Controller
Hi All If this is the incorrect place or people can suggest a better forum to post or an Asterisk consulting service I would be most grateful. I am using an SBC with our * server. All end points register via the SBC to the * server. The sip_buddies table has an entry for user 1111 and user 2222. User 1111 is able to register and make calls without any problems. As soon as I register 2222 user 1111 stops being able to make any calls. If I remove user 1111 from the RT database and have the entry in the sip.conf reload and re-register then this user will work fine as will user 2222 (still running from RT) In my sip.conf I have the following (although I have tried without these): rtcachefriends=yes rtupdate=yes rtautoclear=yes When the users are registered my CLI output shows: (10.10.10.1 Internal IP of SBC) 2222/2222 10.10.10.1 D 5060 Unmonitored 1111/1111 10.10.10.1 D 5060 Unmonitored The Realtime Database shows: fullcontact: sip:1111@10.10.10.1:5060;transport=UDP fullcontact: sip:2222@10.10.10.1:5060;transport=UDP When I try to make a call from phone 1111 after 2222 has registered I see the invites as I would expect and all looks ok but the * server replies with a 403 Forbidden error. I have tailed the full logfile and I can see the SQL commands RT is using to check the extensions etc but I never see the checks for authentication (i.e that he endpoint has permission to make the call) although I do see this in the packet information) I can see the problem occurs when using RT and when placing calls but with all the information in front of me I cannot deduce why the * server sends back this 403 error. Many Thanks in Advance Scott -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061030/31df867f/attachment.htm