I'm having trouble getting my TDM22B to answer a call. I have an analog line plugged into each FXO modules (two analog lines) Neither answer or pickup the call in Astrerisk when dialed from an external phone (eg cell phone). I know the card is working & modules zaptel wctdm are loaded. Here is my dmesg output: [17214228.752000] Module 0: Installed -- AUTO FXO (FCC mode) [17214228.952000] Module 1: Installed -- AUTO FXO (FCC mode) [17214229.840000] Module 2: Installed -- AUTO FXS/DPO [17214230.728000] Module 3: Installed -- AUTO FXS/DPO [17214230.732000] Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) [17214230.732000] Registered tone zone 0 (United States / North America) [17289961.408000] Registered tone zone 0 (United States / North America) [17291652.280000] Registered tone zone 0 (United States / North America) [17291665.348000] Registered tone zone 0 (United States / North America) My /etc/zaptel.conf info: loadzone=us defaultzone=us # Use Kewlstart FXS signalling for the FXO modules 0 and 1 of the TDM422B card fxsks=1-2 # Use Kewlstart FXO signalling for the FXS modules 0 and 1 of the TDM422B card fxoks=3-4 I have two FXO modules in the 1st & 2nd slots on the TDM board and two FXS modules in the 3rd & 4th lots. My /etc/asterisk/zapata.conf info: [channels] ; defaults ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes restrictcid=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echotraining=yes ; define channels for FXO modules 0 & 1 signalling=fxs_ks group=1 channel => 1-2 context=incoming callerid=asreceived ; define channels for FXS modules 0 signalling=fxo_ks channel => 3 context=home callerid=asreceived Any help would be appreciated! Thanks, Jack Morgan