I had a similar problem... every time I rebooted, ztcfg didn't run. I found
that by running "make config" from the Zaptel source directory this
problem was corrected. I had skipped this step in my original setup.
My /etc/rc.local has two entries:
modprobe wct4xxp
safe_asterisk
The current Asterisk Business Edition has a script that makes the rc.local
entries unneeded... but I found that I still had to manually run the "make
config" command to guarantee that Asterisk would automatically recover from
a reboot.
Mark
Mark A. Vince
mavince@optonline.net
> Message: 15
> Date: Wed, 4 Oct 2006 16:26:27 -0400
> From: "Shea, Matt"
> Subject: RE: [asterisk-users] UPDATE: Zaptel problems
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>
> Message-ID:
>
>
> Content-Type: text/plain; charset="US-ASCII"
>
> I found a workaround, inspired by Colin's suggestion to move the
> startupto the rc.local file. It turned that his exact
> suggestion didn't work
> in my situation. I subsequently discovered, though, that after Zaptel
> and Asterisk started in the boot sequence in the usual way, all
> I had to
> do for the Zaptel drivers to fully kick in was re-run ztcfg.
> So, as of
> now, the rc scripts are all in place in the usual way with the
> followingline added to /etc/rc.local:
>
> runuser -l -c ztcfg -s /bin/bash root
>
> Now it's starting properly, but I'm not really all that happy
> that I
> have to put a jury-rigged workaround in place. If anyone has
> the real
> solution, I'd certainly like to hear it.
>
> Thanks for all the suggestions so far.
>
> Matt
>
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
> Shea, Matt
> Sent: Wednesday, October 04, 2006 2:35 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [asterisk-users] Zaptel problems
>
> Hmmm,
>
> It appears ztcfg is not being run. Any ideas why?
>
> Matt
>
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Bernardo
> Vieira
> Sent: Wednesday, October 04, 2006 12:40 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Zaptel problems
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Is ztcfg running at boot after the zaptel modules have been loaded?
> What's the output of ztcfg?
>
>
> Shea, Matt wrote:
> > I'm running Asterisk/Zaptel on a Fedora Core 4 machine. The
> software> runs ok with one exception. Zaptel appears to load OK
> on bootup, but
> > when you check it on login, zttool still shows red/nop alarms
> on the
> T1
> > lines. I have to manually start it again for the alarms to
> disappear> and the T1 lines to function properly. I've updated
> the drivers to
> > 1.2.9.1 and double checked my configuration files to no
> effect. Any
> > suggestions will be much appreciated.
> >
> >
> >
> > Matt
> >
> >
> >
> >
> >
> -----------------------------------------------------------------
> -------
> >
> > _______________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061005/71adcd32/attachment.htm