Tomasz Paszkowski
2006-Oct-02 14:33 UTC
[asterisk-users] Problems with Tormenta 2 quad card
Hello,
I am trying to run Tormenta 2 Quad E1 (non-Digium clone) card on one of my
asterisk box. I don't know why the card is not taking any interrupts:
CPU0 CPU1
0: 1099671 1067142 IO-APIC-edge timer
1: 9 0 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
15: 1089 986 IO-APIC-edge ide1
169: 0 0 IO-APIC-level uhci_hcd
177: 0 0 IO-APIC-level uhci_hcd
185: 0 0 IO-APIC-level ehci_hcd
201: 0 0 IO-APIC-level Intel 82801DB-ICH4
209: 43132 0 IO-APIC-level eth0
217: 15916 10007 IO-APIC-level ioc0
225: 29 0 IO-APIC-level ioc1
233: 0 8 IO-APIC-level tor2
Card is configured properly, although any cable is connected to any
port, a driver dosen't show any alarms.
[root@linux zaptel-trunk]# cat /proc/zaptel/1 | head -2
Span 1: Tor2/0/1 "Tormenta 2 (PCI) Quad E1 Card 0 Span 1"
HDB3/CCS/CRC4 ClockSource
[root@linux zaptel-trunk]# cat /proc/zaptel/2 | head -2
Span 2: Tor2/0/2 "Tormenta 2 (PCI) Quad E1 Card 0 Span 2"
HDB3/CCS/CRC4
[root@linux zaptel-trunk]# cat /proc/zaptel/3 | head -2
Span 3: Tor2/0/3 "Tormenta 2 (PCI) Quad E1 Card 0 Span 3"
HDB3/CCS/CRC4
[root@linux zaptel-trunk]# cat /proc/zaptel/4 | head -2
Span 4: Tor2/0/4 "Tormenta 2 (PCI) Quad E1 Card 0 Span 4"
HDB3/CCS/CRC4
I've compiled zaptel with WATCHDOG enabled and in dmesg I can see:
Span Tor2/0/1 is dead with no revival
Span Tor2/0/2 is dead with no revival
Span Tor2/0/3 is dead with no revival
Span Tor2/0/1 is alive!
Span Tor2/0/2 is alive!
Span Tor2/0/3 is alive!
Span Tor2/0/1 is dead with no revival
Span Tor2/0/2 is dead with no revival
Span Tor2/0/3 is dead with no revival
Span Tor2/0/4 is dead with no revival
Does anyone can told me where is the problem ? Card is broken (I've two tor2
cards and both behaves the same way).
--
Tomasz Paszkowski
Systems engineer
DCG Dominas Consulting Group Sp. z o.o.
http://www.dcg.pl