hi list, i need some help here... i have the following setup 1. openser running on port 5060 - succesfully registering endpoints. all good. 2 asterisk 1.2 running sip on port 5070 on the same machine. 3. asterisk 1.09 running sip on port 5070 a different machine. i have 2 routes in my openser.cfg: 1: if (uri =~ "sip:011973[0-9]{8}@*") { log(1, "Forwarding to Asterisk\n"); rewritehostport("asterisk1IP:5070"); route(1); return; } 2: if (uri =~ "sip:1[0-9]{10}@*") { log(1, "Forwarding to Asterisk\n"); rewritehostport("asterisk2IP:5070"); route(1); return; } route 2 works fine (to asterisk 1.09). sip.conf on asterisk 1.09 looks like this: ; SIP Configuration for Asterisk ; [general] port=5070 ; Port to bind to bindport=5070 disallow=all ; Disallow all codecs allow=ulaw allow=alaw allow=ilbc allow=gsm dtmfmode=rfc2833 relaxdtmf=yes tos=lowdelay context=myContext canreinvite=no host=dynamic insecure=port,invite nat=yes qualify=1000 autocreatepeer=yes for the life of me, i cannot get SER to talk to asterisk1 (with 1.2release). the same sip.conf doesn't work at all - asterisk completely ignores the requests (even at most verbose) - I've tried everything. if anyone has any ideas i'd be very grateful. I need to have SER talk to asterisk without defining a sip.conf entry for every entry. really, i'm tearing my hair out - please help. -yair -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060929/2d31ef3f/attachment.htm