Hi,
Here is how I have it working:
If Alice calls Bob and Bob's phone diverts the call to Carol.
You want Bob to pay for the call and the callerid shown to Carol to be
'Alice'
On Bob's server
exten _X.,1,sipaddheader(Divertion:<Bob@anonynous.invalid;user=phone>
The proxy that routes bob's call to Carol will then charge Bob for the
call and the From: field will be Alice
If you are an ITSP using Asterisk then you must look for the 'Divertion'
header in incoming SIP invite's yourselves with a
sipheader(Divertion) command
I have this working in a few different scenarios
I think that the right thing todo would be setting the RDNIS if the
'Divertion' is present on inbound side but I am not sure about this so I
am using a private variable and doing this outside the SIP channel
b.r.
Freddi
> Thanks... I did some research and found that it's actually not what I
was
> wanting (unless I missed something lol). I'm actually looking for a
way to
> forward caller id information to the called party on a forwarded call. I
> may just need to dig deeper.
>
> On another note, I did find a patch in mantis that is considered
> experimental that does get it to where you can see the caller id of who
> you're calling based in the dialplan. Back to the drawing board though
:)
>
> Aaron
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kristian
> Kielhofner
> Sent: Wednesday, September 27, 2006 4:23 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] RPID
>
> DANIEL, AARON MATTHEW wrote:
>
>> > Has anyone successfully gotten rpid working between two phones
through
>> > asterisk?
>> >
>> >
>> >
>> > Aaron Daniel
>> >
>> > Computer Systems Technician
>> >
>> > Sam Houston State University
>> >
>> > amdtech@shsu.edu
>> >
>> > (936) 294-4198
>> >
>>
>
> Aaron,
>
> RPID is supported in Asterisk but many phones do not support it.
> Try
> adding the following to sip.conf:
>
> sendrpid=yes
> trustrpid=yes
>
> If it is going to work with your phones, it will just work. If not,
>
> chances are your phone does not support RPID. You can always look at a
> SIP debug to make sure it is getting sent. Even if your phones do not
> support RPID, From: usually works just fine :) .
>
> --
> Kristian Kielhofner
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>