Álvaro Palma
2006-Sep-26 12:05 UTC
[asterisk-users] TE406P not working on Intel D101Ggc motherboard.
I recently moved a TE406P card from an Intel D865GBF motherboard (where
it worked fine), to an Intel D101Ggc card, and now I can't get the spans
to got up correctly. All I get is an endless burst of:
== Primary D-Channel on span 4 up
== Primary D-Channel on span 2 up
!! Got a UA, but i'm in state 1
The other 2 spans doesn't even make an attempt to start.
If I set up one of the "semi-awake" spans in intense debug mode, all
that I get is:
< Supervisory frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 000 P/F: 1
< 0 bytes of data
-- ACKing all packets from 0 to (but not including) 0
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Unsolicited RR with P/F bit, responding
Sending Receiver Ready (0)
> [ 02 01 01 01 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 000 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
and so on...
The spans are connected to Pika Primenet E1 card, which is set as
Network side in the four spans. This card is installed in a different
machine. My configuration for the Digium card is:
*********************************************************************
zaptel.conf:
span=1,1,0,ccs,hdb3,yellow
bchan=1-15
dchan=16
bchan=17-31
span=2,2,0,ccs,hdb3,yellow
bchan=32-46
dchan=47
bchan=48-62
span=3,3,0,ccs,hdb3,yellow
bchan=63-77
dchan=78
bchan=79-93
span=4,4,0,ccs,hdb3,yellow
bchan=94-108
dchan=109
bchan=110-124
loadzone=cl
defaultzone=cl
*********************************************************************
zapata.conf:
[channels]
language=es
switchtype=euroisdn
pridialplan=national
prilocaldialplan=national
priindication=inband
usecallerid=yes
hidecallerid=no
restrictcid=no
usecallingpres=yes
relaxdtmf=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=-3.0
txgain=-15.0
canpark=yes
resetinterval=never
signalling=pri_cpe
group=1
context=zap_pstn
channel => 1-15
channel => 17-46
channel => 48-77
channel => 79-108
channel => 110-124
*********************************************************************
Zaptel version 1.2.9.1, Asterisk 1.2.12.1, RHEL4 2.6.9-42.0.2.ELsmp,
/proc/interrupts says:
CPU0 CPU1
0: 47653469 47665247 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 67 0 IO-APIC-edge i8042
14: 446945 446248 IO-APIC-edge ide0
169: 0 0 IO-APIC-level libata
177: 30424 29392 IO-APIC-level libata
185: 0 0 IO-APIC-level ehci_hcd, ohci_hcd, ohci_hcd
193: 222 0 IO-APIC-level HDA Intel
201: 47669502 47599256 IO-APIC-level wct4xxp
209: 129534 0 IO-APIC-level eth0
NMI: 0 0
LOC: 95329567 95329645
ERR: 0
MIS: 0
IRQ balance is running.
Thanks a lot for your answers.
--
Atly.
Alvaro Palma.
Jay R. Ashworth
2006-Sep-26 13:23 UTC
[asterisk-users] TE406P not working on Intel D101Ggc motherboard.
On Tue, Sep 26, 2006 at 03:03:23PM -0400, ?lvaro Palma wrote:> I recently moved a TE406P card from an Intel D865GBF motherboard (where > it worked fine), to an Intel D101Ggc card, and now I can't get the spans > to got up correctly. All I get is an endless burst of:As much of a pain as it is, I always as, in such circumstances: did you put it back on the original working mobo? Does it still work? They don't call it provocative maintenance for nothing. Cheers, -- jra -- Jay R. Ashworth jra@baylink.com Designer Baylink RFC 2100 Ashworth & Associates The Things I Think '87 e24 St Petersburg FL USA http://baylink.pitas.com +1 727 647 1274 "That's women for you; you divorce them, and 10 years later, they stop having sex with you." -- Jennifer Crusie; _Fast_Women_