Giorgio Incantalupo
2006-Sep-26 01:55 UTC
[asterisk-users] Cannot make outbound calls to some numbers with PRI line from legacy PBX thru Asterisk with Sangoma
Hi, I have an Asterisk box with a Sangoma a102 making bridge between an old legacy PBX and a PRI line. Our customer told us he could not call some numbers so we investigated and found he was right: each time we tried to call some numbers the other party hang up. It could be be the other party PBX so we acted on zapata.conf and finally we found the right parameters configuration and we could call those numbers....but now it is not possible to receive inbound calls. Is something related to http://bugs.digium.com/print_bug_page.php?bug_id=7511? Why I cannot receive inbound calls?? Is there anybody experienced situation like this? TIA Giorgio Incantalupo (zapata.conf follows) ; this channels are connected to PRI context = outbound_calls group = 1 immediate = no internationalprefix = 00 language = us nationalprefix = 0 pridialplan = unknown prilocaldialplan = unknown priindication = inband resetinterval = never signalling = pri_cpe switchtype = national usecallerid = yes callerid = asreceived overlapdial=no relaxdtmf=yes usedistinctiveringdetection=yes channel => 1-15,17-31 ; this channels are connected to legacy PBX context = legacy_zap group = 2 immediate = no ;internationalprefix = 00 language = us ;nationalprefix = 0 ;pridialplan = national priindication = inband resetinterval = never signalling = pri_net switchtype = euroisdn ;usecallerid = yes callerid = asreceived relaxdtmf=yes overlapdial=yes ; YES is mandatory here usedistinctiveringdetection=yes channel => 32-46,48-62
Klaus Darilion
2006-Sep-26 02:04 UTC
[asterisk-users] Cannot make outbound calls to some numbers with PRI line from legacy PBX thru Asterisk with Sangoma
Giorgio Incantalupo wrote:> Hi, > I have an Asterisk box with a Sangoma a102 making bridge between an old > legacy PBX and a PRI line. > Our customer told us he could not call some numbers so we investigated > and found he was right: each time we tried to call some numbers the > other party hang up. It could be be the other party PBX so we acted on > zapata.conf and finally we found the right parameters configuration and > we could call those numbers....but now it is not possible to receive > inbound calls. Is something related toThis is too less information to find your problem. What is the problem in receiving incoming calls? Activate PRI debugging set verbose 9 pri debug span 1 pri debug span 2 and watch the q931 signaling. Where is the problem with the incoming call: between PSTN and Asterisk or between Asterisk and the PBX? I guess you have problems with the Type of Number (pridialplan , prilocaldialplan ) regards klaus> http://bugs.digium.com/print_bug_page.php?bug_id=7511? > > Why I cannot receive inbound calls?? Is there anybody experienced > situation like this? > > TIA > > Giorgio Incantalupo > > (zapata.conf follows) > > ; this channels are connected to PRI > context = outbound_calls > group = 1 > immediate = no > internationalprefix = 00 > language = us > nationalprefix = 0 > pridialplan = unknown > prilocaldialplan = unknown > priindication = inband > resetinterval = never > signalling = pri_cpe > switchtype = national > usecallerid = yes > callerid = asreceived > overlapdial=no > relaxdtmf=yes > usedistinctiveringdetection=yes > channel => 1-15,17-31 > > ; this channels are connected to legacy PBX > context = legacy_zap > group = 2 > immediate = no > ;internationalprefix = 00 > language = us > ;nationalprefix = 0 > ;pridialplan = national > priindication = inband > resetinterval = never > signalling = pri_net > switchtype = euroisdn > ;usecallerid = yes > callerid = asreceived > relaxdtmf=yes > overlapdial=yes ; YES is mandatory here > usedistinctiveringdetection=yes > channel => 32-46,48-62 > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users