Hello (again) When doing a STATUS request on the AMI, I get informations like these: Event: Status Privilege: Call Channel: SIP/311-08b97790 CallerID: 310 CallerIDName: Aastra Account: State: Ringing Uniqueid: 1157967815.19 My problem is that I want to tie my own information to a call, actually to tie the number that the SIP extension has called. For some reason this information is not available in the AMI, at least not in the STATUS messages. I discovered that I in the dialplan could set the Acoountcode to the called number, and then get it shown in the STATUS messages, but this of cause gives a lot of other problems. Is it possible to for instance to set a uservariable in the dialplan, and get it shown in the manager interface? Something like: Event: Status Privilege: Call Channel: SIP/311-08b97790 CallerID: 310 CallerIDName: Aastra Account: MyVariable: 12345678 State: Ringing Uniqueid: 1157967815.19 Other good ideas are welcome :-) Michael