Hai, I have two server. One for the inbound calls and one for the outbound calls. When a call somes on the inbound server, I pas this call with a switch statement through to the outbound server. On this outbound server I make a outbound call with the Dial statement. (this works perfect. If the outbount call is not answersed, I hangup the outbound call, and signilling the innbound server that the outbound call is not answered. The inbound call then tries after a couple of seconds (say 5 seconds) to connect again to the outbound server with the switch statement. The outbound server than makes a outbound call. (This works also perfect) But if the outbound call is not answered for the second time, the outbound server signalling the inbound server that the call is not answered. Now the problem is that the inbound server doesn't pick up this second signal. Does anybody got an idee? These are my setting on the inbound server iax.conf outbound_server <http://www.voip-info.org/wiki/outbound_server> type=peer username=outboundserver host=server_outbound extensions.conf outbound_server <http://www.voip-info.org/wiki/outbound_server> switch => IAX2/outbound_server These are my setting on the outbound server iax.conf outboundserver <http://www.voip-info.org/wiki/outboundserver> type=user username=outboundserver context=outbound_dial_conf extensions.conf outbound_dial_conf <http://www.voip-info.org/wiki/outbound_dial_conf> exten => _X.,1,Dial(Zap/g1/${tel_outdial},30,${Dial_variables}) Arjan Kroon Mobillion B.V. Copernicuslaan 30 Postbus 554 / PO Box 554 6710 BN Ede tel: +31 (0)318-648920 fax: +31 (0)318-648839 mobile: +31 (0)6-55871460 email: arjan.kroon@mobillion.nl internet: www.mobillion.nl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060905/1d0f3da6/attachment.htm