Klaus Darilion
2006-Aug-30 06:58 UTC
[asterisk-users] Sangoma Problems - A104d not detected
Hi! I'm trying to install a A104d. 1. LSPCI detects the card: # lspci ... 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) 05:04.0 Class affe: Sirrix AG security technologies Sirrix.PCI4S0 4-port ISDN S0 interface (rev 02) 05:09.0 Network controller: Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card 40:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) 2. I build the wanpipe drivers - all without problems 3. The wanrouter utility can not find the card (thus wancfg also does not detect the card) # wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- Card Cnt: S508=0 S514X=0 S518=0 A101-2=0 A104=0 A300=0 A200=0 A108=0 Any hints how to solve the problem? I am using: # cat /etc/redhat-release Red Hat Enterprise Linux AS release 4 (Nahant Update 4) # uname -a Linux salxvoip01 2.6.9-42.0.2.ELsmp #1 SMP Thu Aug 17 18:00:32 EDT 2006 i686 i686 i386 GNU/Linux I tried with the newest wanpipe drivers wanpipe-beta7-2.3.4.tgz thanks klaus
Klaus Darilion
2006-Aug-30 07:05 UTC
[asterisk-users] Sangoma Problems - A104d not detected - solved
Hi! Problem solved. I just removed the wanrouter modules and tried again. This thime there were some more modules loaded and the card is found: ]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . AFT-A104-SH : SLOT=9 : BUS=5 : IRQ=193 : CPU=A : PORT=1 : HWEC=128 : V=20 2 . AFT-A104-SH : SLOT=9 : BUS=5 : IRQ=193 : CPU=A : PORT=2 : HWEC=128 : V=20 3 . AFT-A104-SH : SLOT=9 : BUS=5 : IRQ=193 : CPU=A : PORT=3 : HWEC=128 : V=20 4 . AFT-A104-SH : SLOT=9 : BUS=5 : IRQ=193 : CPU=A : PORT=4 : HWEC=128 : V=20 Card Cnt: S508=0 S514X=0 S518=0 A101-2=0 A104=1 A300=0 A200=0 A108=0 regards klaus Klaus Darilion wrote:> Hi! > > I'm trying to install a A104d. > > 1. LSPCI detects the card: > # lspci > ... > 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA > Controller (rev 03) > 05:04.0 Class affe: Sirrix AG security technologies Sirrix.PCI4S0 4-port > ISDN S0 interface (rev 02) > 05:09.0 Network controller: Sangoma Technologies Corp. A104d QUAD T1/E1 > AFT card > 40:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 > Gigabit Ethernet PCI Express (rev 01) > > > 2. I build the wanpipe drivers - all without problems > > 3. The wanrouter utility can not find the card (thus wancfg also does > not detect the card) > > # wanrouter hwprobe > > ------------------------------- > | Wanpipe Hardware Probe Info | > ------------------------------- > > Card Cnt: S508=0 S514X=0 S518=0 A101-2=0 A104=0 A300=0 A200=0 A108=0 > > Any hints how to solve the problem? I am using: > # cat /etc/redhat-release > Red Hat Enterprise Linux AS release 4 (Nahant Update 4) > # uname -a > Linux salxvoip01 2.6.9-42.0.2.ELsmp #1 SMP Thu Aug 17 18:00:32 EDT 2006 > i686 i686 i386 GNU/Linux > > I tried with the newest wanpipe drivers wanpipe-beta7-2.3.4.tgz > > thanks > klaus > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Sangoma provides EXCELLENT support. I would try them I just installed a A101, and had some problems, but the hwprobe found the card OK. You MIGHT want to try different PCI slots before contacting them My problem was somewhat different, and was fixed by a reboot of the machine between installation steps Also, I am using the latest stable drivers John Novack Klaus Darilion wrote:> Hi! > > I'm trying to install a A104d. > > 1. LSPCI detects the card: > # lspci > ... > 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA > Controller (rev 03) > 05:04.0 Class affe: Sirrix AG security technologies Sirrix.PCI4S0 > 4-port ISDN S0 interface (rev 02) > 05:09.0 Network controller: Sangoma Technologies Corp. A104d QUAD > T1/E1 AFT card > 40:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 > Gigabit Ethernet PCI Express (rev 01) > > > 2. I build the wanpipe drivers - all without problems > > 3. The wanrouter utility can not find the card (thus wancfg also does > not detect the card) > > # wanrouter hwprobe > > ------------------------------- > | Wanpipe Hardware Probe Info | > ------------------------------- > > Card Cnt: S508=0 S514X=0 S518=0 A101-2=0 A104=0 A300=0 A200=0 > A108=0 > > Any hints how to solve the problem? I am using: > # cat /etc/redhat-release > Red Hat Enterprise Linux AS release 4 (Nahant Update 4) > # uname -a > Linux salxvoip01 2.6.9-42.0.2.ELsmp #1 SMP Thu Aug 17 18:00:32 EDT > 2006 i686 i686 i386 GNU/Linux > > I tried with the newest wanpipe drivers wanpipe-beta7-2.3.4.tgz > > thanks > klaus > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >