hi, we've got a Diva Server BRI-2M PCI, SN:3485 card in our asterisk server. we use the latest divas4linux-melware-3.0.g-106.628.1-1 driver for it. the card is connected to a Bosch Integral33 PBX. the two system connected with an S0 line in order the two pbx be able to call eachother. when we call from the bosch to asterisk everything is working properly. but when we call from the a x-ten soft phone client through asterisk to the bosch the it's not working. which means the asterisk pass the call to the bosch, bosch receive but don't ring the given number. after we debug the capi layer with bosch experts from bosch we found the while the bosch call asterisk it request SPEECH time bearer, but when asterisk call bosch it set bearer to MULTIUSE. i found it in ./divactrl/common/dbg_tapi.c LINE_BEARER_MODE__SPEECH, LINE_BEARER_MODE__MULTIUSE. so probably the problem is thet we (x-ten, asterisk, a divas4linux do not set the bearer to proper value. is this the real reason? how can i set the bearer to speech in divas4linux or in capi or in asterisk's capi or ...? thank you for your help in advance. yours. -- Levente "Si vis pacem para bellum!"