asterisk users - Aug 2006 - CallerID is not displaying for my incoming calls

Hi Friends,

We have installed Asterisk with Digium 04B card (4 FXO ports). Now, I have
connected my PSTN line directly to first port. I am making outgoing calls and
receiving incoming calls successfully through my Asterisk. The problem is: When
I am receiving a call from outside (PSTN), I am not getting the callerid number
and getting callerid as "Asterisk" in my softphones (XLite). Here I am
giving my configuration files.

zaptel.conf file contents:

loadzone = us
defaultzone=us
fxsks=1-4

zapata.conf file contents:

[channels]
context=incoming
signalling=fxs_ks
busydetect=1
busycount=7
relaxdtmf=yes
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
cancallforward=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callerid=asreceived
language=en
usecallerid=yes
hidecallerid=no
echocancel=yes
transfer=yes
immediate=no
group=1
callgroup=9
pickupgroup=9
channel => 1

sip.conf file contents:

[105]
type=friend
username=105
secret=ravi
callerid="RaviKanth"
host=dynamic
context=leader
canreinvite=no
nat=yes
dtmfmode=rfc2833
allow=all

extensions.conf file contents:

[incoming]
exten => s,1,Answer
exten => s,2,SetMusicOnHold(default)
exten => s,3,DigitTimeout,5
exten => s,4,ResponseTimeout,10
exten => s,5,Background(/tmp/virg2)
exten => s,6,Goto(s,1)
include => leader

[leader]
exten => 105,1,Dial(SIP/105,15)
exten => 105,2,Voicemail(u105)
exten => 105,3,Voicemail(b105)
exten => 105,4,Hangup
exten => _9XXXXXXXXXX,1,Dial(Zap/1/${EXTEN:1})        ; Mobile phone
exten => _5XXXXXXXX,1,Dial(Zap/1/${EXTEN:1})        ; Local Landline
include => internal

[internal]
exten => 105, 1, Dial(SIP/105,15)

My Asterisk console displayed these below messages, when a call comes from PSTN:

Got event 18 (Ring Begin)...
 Aug 14 14:11:58 WARNING[26744]: pbx.c:5869 pbx_builtin_dtimeout: DigitTimeout
is deprecated, please use Set(TIMEOUT(digit)=timeout) instead.
 Aug 14 14:11:58 WARNING[26744]: pbx.c:5845 pbx_builtin_rtimeout:
ResponseTimeout is deprecated, please use Set(TIMEOUT(response)=timeout)
instead.

What I have to do to display the PSTN caller number on my softphones? Please
tell me. Looking forward to your response. Thank you.

Regards,
Chandra.



 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060814/536a82a8/attachment.htm

Crazy Boy wrote:
> Hi Friends,
> 
> We have installed Asterisk with Digium 04B card (4 FXO ports). Now, I 
> have connected my PSTN line directly to first port. I am making outgoing 
> calls and receiving incoming calls successfully through my Asterisk. The 
> problem is: When I am receiving a call from outside (PSTN), I am not 
> getting the callerid number and getting callerid as "Asterisk" in
my
> softphones (XLite). Here I am giving my configuration files.
> 
> zaptel.conf file contents:
> 
> loadzone = us
> defaultzone=us
> fxsks=1-4
> 
> zapata.conf file contents:
> 
> [channels]
> context=incoming
> signalling=fxs_ks
> busydetect=1
> busycount=7
> relaxdtmf=yes
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> cancallforward=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> callerid=asreceived
> language=en
> usecallerid=yes
> hidecallerid=no
> echocancel=yes
> transfer=yes
> immediate=no
> group=1
> callgroup=9
> pickupgroup=9
> channel => 1
The above entries appear to be reasonable and correct. If you have not 
properly set rxgain and txgain, it "could" impact callerid. If those 
gains are too high/low, asterisk will not properly read the callerid 
data when sent to you.
> extensions.conf file contents:
> 
> [incoming]
> exten => s,1,Answer
> exten => s,2,SetMusicOnHold(default)
> exten => s,3,DigitTimeout,5
> exten => s,4,ResponseTimeout,10
> exten => s,5,Background(/tmp/virg2)
> exten => s,6,Goto(s,1)
> include => leader
> Got event 18 (Ring Begin)...
> Aug 14 14:11:58 WARNING[26744]: pbx.c:5869 pbx_builtin_dtimeout: 
> DigitTimeout is deprecated, please use Set(TIMEOUT(digit)=timeout) instead.
> Aug 14 14:11:58 WARNING[26744]: pbx.c:5845 pbx_builtin_rtimeout: 
> ResponseTimeout is deprecated, please use Set(TIMEOUT(response)=timeout) 
> instead.
The above two WARNING statements are telling you that either you are 
copying those exten=> statements from someone's old config files, or, 
you haven't read the asterisk documentation. The message is telling you 
that your statement "exten => s,3,DigitTimeout,5" should be
replaced
with the Set(TIMEOUT(digit)=timeout) syntax. Your statements are still 
executing properly today, but the next time you upgrade asterisk code, 
they are likely to fail due to the old syntax not being supported.

Try 'show function TIMEOUT' from your CLI and read it.
> What I have to do to display the PSTN caller number on my softphones? 
> Please tell me. Looking forward to your response. Thank you.

At 02:14 AM 8/14/2006, you wrote:
>We have installed Asterisk with Digium 04B card (4 FXO ports). Now, 
>I have connected my PSTN line directly to first port. I am making 
>outgoing calls and receiving incoming calls successfully through my 
>Asterisk. The problem is: When I am receiving a call from outside 
>(PSTN), I am not getting the callerid number and getting callerid as 
>"Asterisk" in my softphones (XLite). Here I am giving my
configuration files.
>
>
>[incoming]
exten => s,1,wait(2)
>exten => s,n,Answer
>exten => s,n,SetMusicOnHold(default)
>exten => s,n,DigitTimeout,5
>exten => s,n,ResponseTimeout,10
>exten => s,n,Background(/tmp/virg2)
>exten => s,n,Goto(s,1)
>include => leader
>
>What I have to do to display the PSTN caller number on my 
>softphones? Please tell me. Looking forward to your response. Thank you.

When I had this problem, adding a wait() in front of the answer cured 
the problem.  I have the same TDM04 card and we get callerid no problem now.

Ira