Jon Schøpzinsky
2006-Aug-08 05:16 UTC
SV: [asterisk-users] IAX trunk behing NAT with dynamic IP
Set the host=dynamic on serverA, and let the serverB register with serverA Jon -----Oprindelig meddelelse----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne af Andre Courchesne - Consultant Sendt: 8. august 2006 14:09 Til: asterisk-users@lists.digium.com Emne: [asterisk-users] IAX trunk behing NAT with dynamic IP Hi, Ok, I got a working setup where the * server having the telephony card has a fixed internet IP address (serverA). I am using an IAX trunk from this server to an other one which has a dynamic IP address and is behind a NAT firewall (serverB). Everything works fine untill serverB internet IP address changes. My host line is set to a dynamic DNS entry (with zoneedit.com) How can I resolve this so that serverA "see" the IP address change of serverB ? Andre Courchesne - Consultant http://www.net-forces.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.7/411 - Release Date: 07-08-2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.7/411 - Release Date: 07-08-2006
If that doesn't work, the OP can set up a cron job to do a IAX2 Reload every 5 minutes like I did. I have the exact same problem. I hope the OP reports back if that works, because I would rather add the host statement than run a cron job every 5 minutes. On 8/8/06, Jon Sch?pzinsky <jos@detele.dk> wrote:> Set the host=dynamic on serverA, and let the serverB register with serverA > > Jon >