asterisk users - Jul 2006 - Re: asterisk-users Digest, Vol 24, Issue 116

Hello,
I have installed Asterisk, and configured the phone. I can hear the dial 
tone,
But When I try to make a call I hear the message that
"That number is not in speed dial, Please try again".

Can any please suggest what I am missing.
Below are my very basic configurations..

[root@asterisk1 asterisk]# cat sip.conf

[general]
context = from-internal
port = 5060           ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0    ; Address to bind to (all addresses on machine)
disallow=all
allow=ulaw
allow=alaw
callerid = Unknown
tos=0x68
#include sip_nat.conf
#include sip_custom.conf
#include sip_additional.conf

[root@asterisk1 asterisk]#
[root@asterisk1 asterisk]# cat sip_additional.conf
[301]
username=301
type=friend
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=never
mailbox=301@device
host=dynamic
dtmfmode=rfc2833
disallow=no
context=from-internal
canreinvite=no
callerid=Jai <301>
allow=yes

[302]
username=302
type=friend
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=never
mailbox=302@device
host=dynamic
dtmfmode=rfc2833
disallow=no
context=from-internal
canreinvite=no
callerid=302 <302>
allow=yes


Thank you for you help..

-Jai

Nobody is going to pay much attention to your help requests if you can't 
even figure out how to set it up so the subject header reflects what the 
problem is all about.

Why don't you try again with an appropriate subject?

B.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.