thr3ads.net - asterisk users - [asterisk-users] RE: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk [Jul 2006]

If this information is useful, please help other people find it:
Share via:

Sam Liang

2006-Jul-19 16:45 UTC

[asterisk-users] RE: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk

Hi Rehan,


I would like to make the my problem a little bit more clear.

My test scheme is below:


     R1                    R2                      IAX trunk    
DX <-----> PORTASIP  <------------>  ASTERISK-root <------>
Astrerisk-client



DX connect to ISDN E1,  says, got 100 Australian number from 61282138600 to
61282138699 assign to it.

I create the route R1 without any problem.  From PortaSIP, we pass the call
by a sip trunk name R2,  this one proved to be fine, since I can read from
the real time log of the ASTERISK-root script that
/var/lib/asterisk/agi-bin/dialparties.agi had already output the messages,
said that it filter out the dnid=61282138622.  The ASTERISK-root, according
the dnid=61282138622, bridges the call invite through IAX trunk to invite
the Asterisk-client.

I can read from the Asterisk-client real time log as below:
(ASTERISK-root with address 203.166.103.230)


-- Accepting AUTHENTICATED call from 203.166.103.230:      
       > requested format = g729,
       > requested prefs = (),
       > actual format = ulaw,
       > host prefs = (ulaw|alaw|gsm|g729),
       > priority = mine
    -- Executing Set("IAX2/isphone-2",
"FROM_DID=s/0413509414") in new stack
    -- Executing Goto("IAX2/isphone-2", "ext-local|200|1")
in new stack
    -- Goto (ext-local,200,1)
    -- Executing Macro("IAX2/isphone-2", "exten-vm|200|200")
in new stack
    -- Executing Macro("IAX2/isphone-2", "user-callerid") in
new stack
    -- Executing Set("IAX2/isphone-2", "AMPUSER=") in new
stack
    -- Executing Set("IAX2/isphone-2", "EMERGENCYCID=") in
new stack
    -- Executing Set("IAX2/isphone-2", "AMPUSERCIDNAME=") in
new stack
    -- Executing GotoIf("IAX2/isphone-2", "1?6") in new
stack
    -- Goto (macro-user-callerid,s,6)
    -- Executing NoOp("IAX2/isphone-2", "Using CallerID
"" <0413509414>") in
new stack
    -- Executing Set("IAX2/isphone-2",
"FROMCONTEXT=exten-vm") in new stack
    -- Executing Macro("IAX2/isphone-2",
"record-enable|200|IN") in new
stack
    -- Executing GotoIf("IAX2/isphone-2", "0 > 0?2:4") in
new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing AGI("IAX2/isphone-2",
"recordingcheck|20060719-143711|1153283831.27") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20060719-143711|1153283831.27: Inbound recording not
enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing NoOp("IAX2/isphone-2", "No recording
needed") in new stack
    -- Executing Macro("IAX2/isphone-2", "dial|15|tr|200")
in new stack
    -- Executing AGI("IAX2/isphone-2", "dialparties.agi") in
new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
    --  dialparties.agi: priority = 1
    --  dialparties.agi: callingani2 = 0
    --  dialparties.agi: accountcode = 
    --  dialparties.agi: channel = IAX2/isphone-2
    --  dialparties.agi: callerid = 0413509414
    --  dialparties.agi: context = macro-dial
    --  dialparties.agi: callington = 0
    --  dialparties.agi: dnid = unknown
    --  dialparties.agi: request = dialparties.agi
    --  dialparties.agi: calleridname = unknown
    --  dialparties.agi: extension = s
    --  dialparties.agi: language = en
    --  dialparties.agi: uniqueid = 1153283831.27
    --  dialparties.agi: callingpres = 0
    --  dialparties.agi: type = IAX2
    --  dialparties.agi: rdnis = unknown
    --  dialparties.agi: callingtns = 0
    --  dialparties.agi: enhanced = 0.0
  dialparties.agi: Caller ID name is 'unknown' number is
'0413509414'
  dialparties.agi: Methodology of ring is  'none'
    --  dialparties.agi: Added extension 200 to extension map
    --  dialparties.agi: Extension 200 cf is disabled
    --  dialparties.agi: Extension 200 do not disturb is disabled
       >  dialparties.agi: extnum: 200
       >  dialparties.agi: exthascw: 0
       >  dialparties.agi: exthascfb: 0
       >  dialparties.agi: extcfb: 
    --  dialparties.agi: Checking CW and CFB status for extension 200
  == Parsing '/etc/asterisk/manager.conf': Found
  == Parsing '/etc/asterisk/manager_custom.conf': Found
  == Manager 'admin' logged on from 127.0.0.1
    --  dialparties.agi: Correct AMPMGRUSER and AMPMGRPASS
       >  dialparties.agi: extstate: 0
  == Manager 'admin' logged off from 127.0.0.1
  dialparties.agi: Extension 200 is available...skipping checks
    --  dialparties.agi: DbSet CALLTRACE/200 to 0413509414
    -- AGI Script dialparties.agi completed, returning 0
    -- Executing Dial("IAX2/isphone-2", "IAX2/200|15|tr") in
new stack
    -- Called 200
    -- Call accepted by 61.29.101.98 (format ulaw)
    -- Format for call is ulaw
    -- IAX2/200-5 is ringing
    -- IAX2/200-5 answered IAX2/isphone-2
    -- Attempting native bridge of IAX2/isphone-2 and IAX2/200-5
    -- Hungup 'IAX2/200-5'
  == Spawn extension (macro-dial, s, 10) exited non-zero on
'IAX2/isphone-2'
in macro 'dial'
  == Spawn extension (macro-dial, s, 10) exited non-zero on
'IAX2/isphone-2'
in macro 'exten-vm'
  == Spawn extension (macro-dial, s, 10) exited non-zero on
'IAX2/isphone-2'
    -- Hungup 'IAX2/isphone-2'

>From the log messages above us, I am sure the Asterisk-client can not getthe dnid, or the dnid = unknown is got by the
/var/lib/asterisk/agi-bin/dialparties.agi.  Consequently I must create a
route in asterisk to said, DID=*/callerid=0413509414 will be route to
extensions 200.

That make the call from mobile 0413509414 to 821386[XX] go to extensions
200.  But what I want to make for the client is, provided I can pass the
DNID to the customer Premium, DID=82138622 to extension 200, DID=32138600 to
receptionist, etc...

I am stuck on the place of unable to pass the DNID variable to the
Asterisk-client by IAX-trunk.

The reason of we want to create an Asterisk-root between our PortaSIP and
the Asterisk-client is, we want to be benefit from the IAX trunk of packet
saving and etc.

But we just can not pass the DNID(B-party number to the client Asterisk)
Hope that you can have some idea to help us.

We did not get the DID from didx.

Best regards,

Sam

-----Original Message-----
From: Rehan AllahWala [mailto:rehan@supertec.com] 
Sent: Wednesday, July 19, 2006 5:53 PM
To: samliang@isphone.com.au
Subject: Re: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk

Hello,

Have u tried did's from didx if they pass dnis to u ?

Rehan

From:	"Sam Liang" <samliang@isphone.com.au>
To:	<asterisk-dev@lists.digium.com>
Date sent:	Wed, 19 Jul 2006 14:53:04 +1000
Subject:	[asterisk-dev] How to send DNIS(B-party number) in IAX trunk
Send reply to:	Asterisk Developers Mailing List
<asterisk-dev@lists.digium.com>
	<mailto:asterisk-dev-request@lists.digium.com?subject=unsubscribe>
	<mailto:asterisk-dev-request@lists.digium.com?subject=subscribe>
> Hi, 
> 
> I am a voip engineer in a Sydney company,
> 
> We got a problem when we want to set up multiple IAX trunks.
> 
> We set up the trunk from PortSIP to IAX2 trunk fine. But when the customer
> set up a Asterisk trunk to our Asterisk server, which hopefully relay
> multiple call from PortaSIP into our Asterisk and then to the customer
> Asterisk server by the specific trunk.  We get a problem. Our PortaSIP
send> out the DID into Asterisk, Asterisk grasp the DID with AGI function, but
> when the call go further into customer premise Asterisk DID, Our Asterisk
> just bridge the call to the customer's IAX2 trunk, but failed to pass
the
> DID number further, 
> 
> That means our customer can only create a single number trunk with our
> Asterisk, instead of what we want to achieve for the read PABX, multiple
DID> route inside a single IAX2 trunk.
> 
> I will like to enclose the Asterisk log here as well, the ITSP_Asterisk
log> contain the log information when a call make to the premium with DID_NUM
> 61282138622, and the customer_side_Asterisk.log contain the concurrent log
> of the customer premium Asterisk log.
> 
> Our Asterisk use Asterisk realtime engine 1.2.1
> 
> Customer use Asterisk@Home 2.8 which is 1.2.7
> 
> Best regards,
> 
> Sam Liang
> 
> Support Network Engineer
> 
> ISPhone Australasia Pty Ltd
> 
> Tel: +61 (0)2 8213 8686
> 
> Fax: +61 (0)2 8213 8685
> 
> Mob: 0413509414
> 
> email: samliang@isphone.com.au
> 
> web:    www.isphone.com.au
> 
>  
> 
> 

Super Technologies Inc., Pensacola, Florida
http://www.SuperTec.com - Technologies from tomorrow, Today!

MSN: Rehan@Rehan.com
Skype: Rehan33



_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev

Paul Hales

2006-Jul-20 18:06 UTC

head link

[asterisk-users] RE: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk

Sam, the issue is that when dialling out you are missing the ${EXTEN} or
similar variable from your dial string - IAX should be
IAX/SERVER/EXTENSION_AT_REMOTE_SERVER - and from your readout the last bit is
not in your dialstring.

Does this make sense?

Kind regards,

Paul Hales
www.asteriskit.com.au
> 
> On Wed, 2006-07-19 at 17:45 -0600, Sam Liang wrote:
> > Hi Rehan,
> > 
> > 
> > I would like to make the my problem a little bit more clear.
> > 
> > My test scheme is below:
> > 
> > 
> >      R1                    R2                      IAX trunk    
> > DX <-----> PORTASIP  <------------>  ASTERISK-root
<------> Astrerisk-client
> > 
> > 
> > 
> > DX connect to ISDN E1,  says, got 100 Australian number from
61282138600 to
> > 61282138699 assign to it.
> > 
> > I create the route R1 without any problem.  From PortaSIP, we pass the
call
> > by a sip trunk name R2,  this one proved to be fine, since I can read
from
> > the real time log of the ASTERISK-root script that
> > /var/lib/asterisk/agi-bin/dialparties.agi had already output the
messages,
> > said that it filter out the dnid=61282138622.  The ASTERISK-root,
according
> > the dnid=61282138622, bridges the call invite through IAX trunk to
invite
> > the Asterisk-client.
> > 
> > I can read from the Asterisk-client real time log as below:
> > (ASTERISK-root with address 203.166.103.230)
> > 
> > 
> > -- Accepting AUTHENTICATED call from 203.166.103.230:      
> >        > requested format = g729,
> >        > requested prefs = (),
> >        > actual format = ulaw,
> >        > host prefs = (ulaw|alaw|gsm|g729),
> >        > priority = mine
> >     -- Executing Set("IAX2/isphone-2",
"FROM_DID=s/0413509414") in new stack
> >     -- Executing Goto("IAX2/isphone-2",
"ext-local|200|1") in new stack
> >     -- Goto (ext-local,200,1)
> >     -- Executing Macro("IAX2/isphone-2",
"exten-vm|200|200") in new stack
> >     -- Executing Macro("IAX2/isphone-2",
"user-callerid") in new stack
> >     -- Executing Set("IAX2/isphone-2", "AMPUSER=")
in new stack
> >     -- Executing Set("IAX2/isphone-2",
"EMERGENCYCID=") in new stack
> >     -- Executing Set("IAX2/isphone-2",
"AMPUSERCIDNAME=") in new stack
> >     -- Executing GotoIf("IAX2/isphone-2", "1?6")
in new stack
> >     -- Goto (macro-user-callerid,s,6)
> >     -- Executing NoOp("IAX2/isphone-2", "Using CallerID
"" <0413509414>") in
> > new stack
> >     -- Executing Set("IAX2/isphone-2",
"FROMCONTEXT=exten-vm") in new stack
> >     -- Executing Macro("IAX2/isphone-2",
"record-enable|200|IN") in new
> > stack
> >     -- Executing GotoIf("IAX2/isphone-2", "0 >
0?2:4") in new stack
> >     -- Goto (macro-record-enable,s,4)
> >     -- Executing AGI("IAX2/isphone-2",
> > "recordingcheck|20060719-143711|1153283831.27") in new stack
> >     -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
> >   recordingcheck|20060719-143711|1153283831.27: Inbound recording not
> > enabled
> >     -- AGI Script recordingcheck completed, returning 0
> >     -- Executing NoOp("IAX2/isphone-2", "No recording
needed") in new stack
> >     -- Executing Macro("IAX2/isphone-2",
"dial|15|tr|200") in new stack
> >     -- Executing AGI("IAX2/isphone-2",
"dialparties.agi") in new stack
> >     -- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
> >     --  dialparties.agi: priority = 1
> >     --  dialparties.agi: callingani2 = 0
> >     --  dialparties.agi: accountcode = 
> >     --  dialparties.agi: channel = IAX2/isphone-2
> >     --  dialparties.agi: callerid = 0413509414
> >     --  dialparties.agi: context = macro-dial
> >     --  dialparties.agi: callington = 0
> >     --  dialparties.agi: dnid = unknown
> >     --  dialparties.agi: request = dialparties.agi
> >     --  dialparties.agi: calleridname = unknown
> >     --  dialparties.agi: extension = s
> >     --  dialparties.agi: language = en
> >     --  dialparties.agi: uniqueid = 1153283831.27
> >     --  dialparties.agi: callingpres = 0
> >     --  dialparties.agi: type = IAX2
> >     --  dialparties.agi: rdnis = unknown
> >     --  dialparties.agi: callingtns = 0
> >     --  dialparties.agi: enhanced = 0.0
> >   dialparties.agi: Caller ID name is 'unknown' number is
'0413509414'
> >   dialparties.agi: Methodology of ring is  'none'
> >     --  dialparties.agi: Added extension 200 to extension map
> >     --  dialparties.agi: Extension 200 cf is disabled
> >     --  dialparties.agi: Extension 200 do not disturb is disabled
> >        >  dialparties.agi: extnum: 200
> >        >  dialparties.agi: exthascw: 0
> >        >  dialparties.agi: exthascfb: 0
> >        >  dialparties.agi: extcfb: 
> >     --  dialparties.agi: Checking CW and CFB status for extension 200
> >   == Parsing '/etc/asterisk/manager.conf': Found
> >   == Parsing '/etc/asterisk/manager_custom.conf': Found
> >   == Manager 'admin' logged on from 127.0.0.1
> >     --  dialparties.agi: Correct AMPMGRUSER and AMPMGRPASS
> >        >  dialparties.agi: extstate: 0
> >   == Manager 'admin' logged off from 127.0.0.1
> >   dialparties.agi: Extension 200 is available...skipping checks
> >     --  dialparties.agi: DbSet CALLTRACE/200 to 0413509414
> >     -- AGI Script dialparties.agi completed, returning 0
> >     -- Executing Dial("IAX2/isphone-2",
"IAX2/200|15|tr") in new stack
> >     -- Called 200
> >     -- Call accepted by 61.29.101.98 (format ulaw)
> >     -- Format for call is ulaw
> >     -- IAX2/200-5 is ringing
> >     -- IAX2/200-5 answered IAX2/isphone-2
> >     -- Attempting native bridge of IAX2/isphone-2 and IAX2/200-5
> >     -- Hungup 'IAX2/200-5'
> >   == Spawn extension (macro-dial, s, 10) exited non-zero on
'IAX2/isphone-2'
> > in macro 'dial'
> >   == Spawn extension (macro-dial, s, 10) exited non-zero on
'IAX2/isphone-2'
> > in macro 'exten-vm'
> >   == Spawn extension (macro-dial, s, 10) exited non-zero on
'IAX2/isphone-2'
> >     -- Hungup 'IAX2/isphone-2'
> > 
> > 
> > >From the log messages above us, I am sure the Asterisk-client can
not get
> > the dnid, or the dnid = unknown is got by the
> > /var/lib/asterisk/agi-bin/dialparties.agi.  Consequently I must create
a
> > route in asterisk to said, DID=*/callerid=0413509414 will be route to
> > extensions 200.
> > 
> > That make the call from mobile 0413509414 to 821386[XX] go to
extensions
> > 200.  But what I want to make for the client is, provided I can pass
the
> > DNID to the customer Premium, DID=82138622 to extension 200,
DID=32138600 to
> > receptionist, etc...
> > 
> > I am stuck on the place of unable to pass the DNID variable to the
> > Asterisk-client by IAX-trunk.
> > 
> > The reason of we want to create an Asterisk-root between our PortaSIP
and
> > the Asterisk-client is, we want to be benefit from the IAX trunk of
packet
> > saving and etc.
> > 
> > But we just can not pass the DNID(B-party number to the client
Asterisk)
> > Hope that you can have some idea to help us.
> > 
> > We did not get the DID from didx.
> > 
> > Best regards,
> > 
> > Sam
> > 
> > -----Original Message-----
> > From: Rehan AllahWala [mailto:rehan@supertec.com] 
> > Sent: Wednesday, July 19, 2006 5:53 PM
> > To: samliang@isphone.com.au
> > Subject: Re: [asterisk-dev] How to send DNIS(B-party number) in IAX
trunk
> > 
> > Hello,
> > 
> > Have u tried did's from didx if they pass dnis to u ?
> > 
> > Rehan
> > 
> > From:	"Sam Liang" <samliang@isphone.com.au>
> > To:	<asterisk-dev@lists.digium.com>
> > Date sent:	Wed, 19 Jul 2006 14:53:04 +1000
> > Subject:	[asterisk-dev] How to send DNIS(B-party number) in IAX trunk
> > Send reply to:	Asterisk Developers Mailing List
> > <asterisk-dev@lists.digium.com>
> > 
<mailto:asterisk-dev-request@lists.digium.com?subject=unsubscribe>
> > 
<mailto:asterisk-dev-request@lists.digium.com?subject=subscribe>
> > 
> > > Hi, 
> > > 
> > > I am a voip engineer in a Sydney company,
> > > 
> > > We got a problem when we want to set up multiple IAX trunks.
> > > 
> > > We set up the trunk from PortSIP to IAX2 trunk fine. But when the
customer
> > > set up a Asterisk trunk to our Asterisk server, which hopefully
relay
> > > multiple call from PortaSIP into our Asterisk and then to the
customer
> > > Asterisk server by the specific trunk.  We get a problem. Our
PortaSIP
> > send
> > > out the DID into Asterisk, Asterisk grasp the DID with AGI
function, but
> > > when the call go further into customer premise Asterisk DID, Our
Asterisk
> > > just bridge the call to the customer's IAX2 trunk, but failed
to pass the
> > > DID number further, 
> > > 
> > > That means our customer can only create a single number trunk
with our
> > > Asterisk, instead of what we want to achieve for the read PABX,
multiple
> > DID
> > > route inside a single IAX2 trunk.
> > > 
> > > I will like to enclose the Asterisk log here as well, the
ITSP_Asterisk
> > log
> > > contain the log information when a call make to the premium with
DID_NUM
> > > 61282138622, and the customer_side_Asterisk.log contain the
concurrent log
> > > of the customer premium Asterisk log.
> > > 
> > > Our Asterisk use Asterisk realtime engine 1.2.1
> > > 
> > > Customer use Asterisk@Home 2.8 which is 1.2.7
> > > 
> > > Best regards,
> > > 
> > > Sam Liang
> > > 
> > > Support Network Engineer
> > > 
> > > ISPhone Australasia Pty Ltd
> > > 
> > > Tel: +61 (0)2 8213 8686
> > > 
> > > Fax: +61 (0)2 8213 8685
> > > 
> > > Mob: 0413509414
> > > 
> > > email: samliang@isphone.com.au
> > > 
> > > web:    www.isphone.com.au
> > > 
> > >  
> > > 
> > > 
> > 
> > 
> > Super Technologies Inc., Pensacola, Florida
> > http://www.SuperTec.com - Technologies from tomorrow, Today!
> > 
> > MSN: Rehan@Rehan.com
> > Skype: Rehan33
> > 
> > 
> > 
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > 
> > asterisk-dev mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-dev
> > 
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > 
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users

asterisk users - Jul 2006 - RE: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk

[asterisk-users] RE: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk

[asterisk-users] RE: [asterisk-dev] How to send DNIS(B-party number) in IAX trunk