Douglas Garstang
2006-Jul-06 15:00 UTC
[asterisk-users] OT: Sipura SPA-3000 ATA Directing Calls to Asterisk
Somewhat off topic... I have a Sipura SPA-3000 ATA. Calls are coming in from the FXO port. I'm trying to get all calls forwarded to Asterisk. However, (and this is hard to believe), the docs say that 1-stage calling (I presume that means no PIN is required) is not possible with FXO-VOIP calls. I somehow managed to get it to work on another SPA-3000 once before ... although I don't know how to replicate it now. Has anyone done this? Can you provide any pointers? Thanks. Doug.
Brian Capouch
2006-Jul-06 15:18 UTC
[asterisk-users] OT: Sipura SPA-3000 ATA Directing Calls to Asterisk
Douglas Garstang wrote:> Somewhat off topic... > > I have a Sipura SPA-3000 ATA. Calls are coming in from the FXO port. I'm trying to get all calls forwarded to Asterisk. However, (and this is hard to believe), the docs say that 1-stage calling (I presume that means no PIN is required) is not possible with FXO-VOIP calls. I somehow managed to get it to work on another SPA-3000 once before ... although I don't know how to replicate it now. Has anyone done this? Can you provide any pointers? Thanks. >I make and take calls on the FXO port of my SPA-3000 routinely. On the "PSTN Line" tab of the advanced screen, I have this in the first "Dialplan" entry: (S0<:s@192.168.1.1>) Then below, I choose that dialplan (in my case, 1) for the value of "PSTN Caller Default DP" Also, of course, you have to set the SIP server, username/pw, etc. I have mine register, and because the FXS port is already on 5060 I use 5061. HTH. B. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
Chris Mason (Lists)
2006-Jul-07 04:08 UTC
[asterisk-users] OT: Sipura SPA-3000 ATA Directing Calls to Asterisk
Douglas Garstang wrote:> Somewhat off topic... > > I have a Sipura SPA-3000 ATA. Calls are coming in from the FXO port. I'm trying to get all calls forwarded to Asterisk. However, (and this is hard to believe), the docs say that 1-stage calling (I presume that means no PIN is required) is not possible with FXO-VOIP calls. I somehow managed to get it to work on another SPA-3000 once before ... although I don't know how to replicate it now. Has anyone done this? Can you provide any pointers? Thanks. > >Use the configuration tool on www.voxilla.com - it works fine. Make sure you choose to configure for Asterisk. Also, set the dftm mode to be commented out, then the tone generation works. ;dtmfmode=rfc2833 Also, I beleive CallerID does not work properly on some firmware versions. -- Chris Mason (264) 497-5670 Fax: (264) 497-8463 Int: (305) 704-7249 Fax: (815)301-9759 UK 44.207.183.0271 Cell: 264-235-5670 Yahoo IM: netconcepts_anguilla@yahoo.com -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.