asterisk users - Jul 2006 - Cisco 7941/7961/7971 wont register with asterisk

After google?ing extensively, I now have sip firmware (8.0.2SR1/8.0.3)
running on the 7941, 7961 and 7971 and I even have a SEPxxxx.cnf.xml that
seems to have everything and works (thanks to articles on
www.voip-info.org).

BUT the phones do not register correctly with asterisk.

Everything is correct in the SIP communication - the phone does a register,
asterisk replies with a 401 Unauthorized, and then the phone sends another
register which should contain an line like:

Authorization: Digest
username="201",realm="my.asterisk.dom"... etc....

This line is missing on the 7941/7961/7971.

Anybody know why?


// Per

Per M?ller wrote:
> This line is missing on the 7941/7961/7971.
>
> Anybody know why?
>
>
>   
Without seeing any of your configuration files, I wouldn't be able to 
guess.  My 7940s and 7960s work just fine.  Although, I'm running the 
7.4 firmware.

Doug

-- Ben Franklin quote: "Those who would give up Essential Liberty to 
purchase a little Temporary Safety, deserve neither Liberty nor Safety."

I use the same firmware as you on your 7960's and SIP authenticates
ok. On our asterisk side we use the following config

[USERNAME]
 type=friend
 host=dynamic
 canreinvite=no
 username=USERNAME
 secret=PASSWORD
 callerid="Name of person" <switchboardnumber>

The only gotcha i noticed at first was that on the phone itself, the
"Name" and the "authentication name" options had to be set
to the
username used in the configuration above.

HTH

On 7/6/06, Per M?ller <per@wallin.dk> wrote:
> After google'ing extensively, I now have sip firmware (8.0.2SR1/8.0.3)
> running on the 7941, 7961 and 7971 and I even have a SEPxxxx.cnf.xml that
> seems to have everything and works (thanks to articles on
> www.voip-info.org).
>
> BUT the phones do not register correctly with asterisk.
>
> Everything is correct in the SIP communication - the phone does a register,
> asterisk replies with a 401 Unauthorized, and then the phone sends another
> register which should contain an line like:
>
> Authorization: Digest
username="201",realm="my.asterisk.dom"... etc....
>
> This line is missing on the 7941/7961/7971.
>
> Anybody know why?
>
>
> // Per
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

I believe that these sip phones only work with cisco call manager. Only
the 7950 and 7960 have an open sip stack

Per M?ller wrote:
> After google?ing extensively, I now have sip firmware (8.0.2SR1/8.0.3)
> running on the 7941, 7961 and 7971 and I even have a SEPxxxx.cnf.xml that
> seems to have everything and works (thanks to articles on
> www.voip-info.org).
>
> BUT the phones do not register correctly with asterisk.
>
> Everything is correct in the SIP communication - the phone does a register,
> asterisk replies with a 401 Unauthorized, and then the phone sends another
> register which should contain an line like:
>
> Authorization: Digest
username="201",realm="my.asterisk.dom"... etc....
>
> This line is missing on the 7941/7961/7971.
>
> Anybody know why?
>
>
> // Per
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   

-- 
Dr. Rodney G. McDuff                 |Ex ignorantia ad sapientiam
Manager, Strategic Technologies Group|    Ex luce ad tenebras
Information Technology Services      |
The University of Queensland         |
EMAIL: mcduff@its.uq.edu.au          |
TELEPHONE: +61 7 3365 8220           |