asterisk users - Jun 2006 - Digium TE410P configuration to connect with CIsco 3800

Hello List,

Can anyone here has a working configuration of any digium e1 card that is
connected to cisco 3800.

Any help will be appreciated.

THanks,
Lito

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Angelito Manansala ha scritto:
> Hello List,
> 
> Can anyone here has a working configuration of any digium e1 card that is
> connected to cisco 3800.
The problem is the router configuration... you need these setups to
try some configuration on the Linux side.

Otherwise: try a cross cable (PRI cross cable is really different) and
some configuration, with E1 you have only two/four configuration
possibile for the D channel, 8 if you consider also CRC. All changes
are in zaptel.conf in the span line (see the documentation).

This is the last configuration found for a CISCO router with E1
interface, is the SAME configuration for the E1 line directly coming
from telco in italy. I made some effort to obtain the router working
exactly as the telco. I dont have the router configuration.

zaptel.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

zapata.conf

signalling = pri_cpe
channel => 1-15,17-31
resetinterval = never
immediate=no
overlapdial=yes


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEo9g33r4gvOdjXD0RApSvAKCBW7e0W7uKvbsgR9oH+PcS+J5Y6ACg04PB
sGt2zlBRs/vP11FeDoCBDL0=Lz42
-----END PGP SIGNATURE-----