asterisk users - Jun 2006 - Asterisk & Cisco 3800

Hi,

I have Cisco 3800 12.3(11)T1 . I ask my provider to point all DID sip based
to hit CISCO and from there I take them to Asterisk, both boxes are on
public IP address. I just want to disclose my Cisco IP to vendors.

But somehow DID are not hitting to Asterisk properly. I think there
something worn in Cisco configuration. I am using

dial-peer voice 1 voip
description incoming DID
incoming called-number xxxxxxxxxx

 dial-peer voice 2 voip
 description Outgoing to Tangerine
 huntstop
 destination-pattern XXXXXXXXXX
 session target ipv4:xx.xx.xx.xx
 dtmf-relay h245-signal h245-alphanumeric


any idea ?.

Thank

If you want to send calls using SIP you have to define in dial-peer.
Add "session protocol sipv2" to dial-peer voice 2 voip interface.

-----Original Message-----
From: Wasif [mailto:wasif@thecommstore.com] 
Sent: Thursday, June 15, 2006 8:19 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Asterisk & Cisco 3800

Hi,

I have Cisco 3800 12.3(11)T1 . I ask my provider to point all DID sip
based
to hit CISCO and from there I take them to Asterisk, both boxes are on
public IP address. I just want to disclose my Cisco IP to vendors.

But somehow DID are not hitting to Asterisk properly. I think there
something worn in Cisco configuration. I am using

dial-peer voice 1 voip
description incoming DID
incoming called-number xxxxxxxxxx

 dial-peer voice 2 voip
 description Outgoing to Tangerine
 huntstop
 destination-pattern XXXXXXXXXX
 session target ipv4:xx.xx.xx.xx
 dtmf-relay h245-signal h245-alphanumeric


any idea ?.

Thank



_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users