Hi gurus...
I have connected an asterisk with a te110p/pri to a GSM ericsson switch, all
apears to be write. But when i try to make an outbond call
from asterisk to the te110p group, the folowing error is logged:
-- Executing Dial("SIP/201-5923",
"ZAP/1-1/0971200152|20|r") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
Question:
Is there a "how to" connect the Asterisk to an ericsson sw?
What other test can i do against the switch?.
Thanks in advance...
this is the te110p configuration...
asterisk1*CLI> pri show span 1
Primary D-channel: 16
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
asterisk1*CLI> zap show channel 1
Channel: 1CLI>
File Descriptor: 19
Span: 1k1*CLI>
Extension: LI>
Dialing: noLI>
Context: default
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 1
Signalling Type: PRI Signalling
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: alaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
PRI Flags:
PRI Logical Span: Implicit
Hookstate (FXS only): Onhook
asterisk1*CLI>
[root@asterisk1 asterisk]# cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS/CRC4
1 WCT1/0/1 Clear (In use)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
=======================================================================================AVISO
LEGAL: Esta informaci?n es privada y confidencial y est? dirigida
?nicamente a su destinatario. Si usted no es el destinatario original de
este mensaje y por este medio pudo acceder a dicha informaci?n por favor
elimine el mensaje. La distribuci?n o copia de este mensaje est?
estrictamente prohibida. Esta comunicaci?n es s?lo para prop?sitos de
informaci?n y no debe ser considerada como propuesta, aceptaci?n ni como
una declaraci?n de voluntad oficial de NUCLEO S.A. La transmisi?n de
e-mails no garantiza que el correo electr?nico sea seguro o libre de error.
Por consiguiente, no manifestamos que esta informaci?n sea completa o
precisa. Toda informaci?n est? sujeta a alterarse sin previo aviso.
.............................................................................................................................................................................................................
This information is private and confidential and intended for the
recipient only. If you are not the intended recipient of this message you
are hereby notified that any review, dissemination, distribution or
copying of this message is strictly prohibited. This communication is for
information purposes only and shall not be regarded neither as a proposal,
acceptance nor as a statement of will or official statement from NUCLEO
S.A. . Email transmission cannot be guaranteed to be secure or error-free.
Therefore, we do not represent that this information is complete or
accurate and it should not be relied upon as such. All information is
subject to change without notice.
Rafael Visser wrote:> Hi gurus... > > I have connected an asterisk with a te110p/pri to a GSM ericsson switch, all apears to be write. But when i try to make an outbond call > from asterisk to the te110p group, the folowing error is logged: > > -- Executing Dial("SIP/201-5923", "ZAP/1-1/0971200152|20|r") in new stack > == Everyone is busy/congested at this time (1:0/0/1) > > > Question: > Is there a "how to" connect the Asterisk to an ericsson sw? > What other test can i do against the switch?. > > Thanks in advance... >What does the exact "Dial" line look like in your extensions.conf? Is 0971200152 the number that the other end is expecting? For instance, our Shoretel "requires" the country code be added, for instance 1503XXXXXXX. Steve
Sorry, at the switch side, the spam is ABL (automatic blocked), is like to
be "Not Aligned".
Im not sure about the required parameters to configure the ericsson with
isdn-pri.
So, lets just wait if someone help me with the isdn config first!!!!..
Thanks.
Steven Ringwald <asric@asric.com>@lists.digium.com con fecha 20/04/2006
03:47:06 p.m.
Por favor, responda a ringwas@acm.org; Por favor, responda a Asterisk Users
Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
Enviado por: asterisk-users-bounces@lists.digium.com
Destinatarios: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
CC:
Asunto: Re: [Asterisk-Users] enablling Te110p with PRI
Rafael Visser wrote:> Hi gurus...
>
> I have connected an asterisk with a te110p/pri to a GSM ericsson switch,
all apears to be write. But when i try to make an outbond
call> from asterisk to the te110p group, the folowing error is logged:
>
> -- Executing Dial("SIP/201-5923",
"ZAP/1-1/0971200152|20|r") in new
stack> == Everyone is busy/congested at this time (1:0/0/1)
>
>
> Question:
> Is there a "how to" connect the Asterisk to an ericsson sw?
> What other test can i do against the switch?.
>
> Thanks in advance...
>
What does the exact "Dial" line look like in your extensions.conf?
Is 0971200152 the number that the other end is expecting?
For instance, our Shoretel "requires" the country code be added, for
instance 1503XXXXXXX.
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Visite nuestro Sitio http://www.personal.com.py
=======================================================================================AVISO
LEGAL: Esta informaci?n es privada y confidencial y est? dirigida
?nicamente a su destinatario. Si usted no es el destinatario original de
este mensaje y por este medio pudo acceder a dicha informaci?n por favor
elimine el mensaje. La distribuci?n o copia de este mensaje est?
estrictamente prohibida. Esta comunicaci?n es s?lo para prop?sitos de
informaci?n y no debe ser considerada como propuesta, aceptaci?n ni como
una declaraci?n de voluntad oficial de NUCLEO S.A. La transmisi?n de
e-mails no garantiza que el correo electr?nico sea seguro o libre de error.
Por consiguiente, no manifestamos que esta informaci?n sea completa o
precisa. Toda informaci?n est? sujeta a alterarse sin previo aviso.
.............................................................................................................................................................................................................
This information is private and confidential and intended for the
recipient only. If you are not the intended recipient of this message you
are hereby notified that any review, dissemination, distribution or
copying of this message is strictly prohibited. This communication is for
information purposes only and shall not be regarded neither as a proposal,
acceptance nor as a statement of will or official statement from NUCLEO
S.A. . Email transmission cannot be guaranteed to be secure or error-free.
Therefore, we do not represent that this information is complete or
accurate and it should not be relied upon as such. All information is
subject to change without notice.
> Rafael Visser wrote: >> Hi gurus... >> >> I have connected an asterisk with a te110p/pri to a GSM ericsson >> switch, all apears to be write. But when i try to make an outbond call >> from asterisk to the te110p group, the folowing error is logged: >> >> -- Executing Dial("SIP/201-5923", "ZAP/1-1/0971200152|20|r") in new >> stack >> == Everyone is busy/congested at this time (1:0/0/1)One thing that is obvious here is you are using 1-1 instead of 1. A better thing would be to use groups. Check /etc/asterisk/zapata.conf and /etc/asterisk/extensions.conf Kevin