Hello: After configuring FXS and FXO channels of a TDM11B card, I can make calls from the telephone attached to the TDM11B card to the outsite (the PSTN, analog line), The problem is when I try to dial from the PSTN to my asterisk box (it has to make ring the handset on the TDM card), but I got infinite "Poopy (00) on card 4!" What is the problem?. This is the output of the wctdm module loaded with debug=1 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 169 Freshmaker version: 73 Freshmaker passed register test ProSLIC on module 0, product 0, version 2 ProSLIC on module 0 seems sane. ProSLIC on module 0 powered up to -75 volts (c9) in 8 ms Loop current set to 20mA! Post-leakage voltage: 33 volts ProSLIC on module 0 powered up to -72 volts (c2) in 5 ms Loop current set to 20mA! Calibration Vector Regs 98 - 107: 98: 11 99: 10 100: 0e 101: 0e 102: 00 103: 54 104: 05 105: 2a 106: 20 107: 08 Init Indirect Registers completed successfully. Proslic module 0 loop current is 20mA Module 0: Installed -- AUTO FXS/DPO ProSLIC on module 1, product 0, version 0 Module 1: Not installed ProSLIC on module 2, product 0, version 0 Module 2: Not installed ProSLIC on module 3, product 0, version 0 VoiceDAA System: 04 ISO-Cap is now up, line side: 03 rev 03 Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) 10299583 Polarity reversed (0 -> -1) wctdm: Card 0 Going off hook wctdm: Card 0 Going on hook and when receiving a call from the PSTN I see this on /var/log/messages Mar 27 22:32:25 lineox kernel: Registered tone zone 2 (France) Mar 27 22:32:36 lineox kernel: RING on 1/4! Mar 27 22:32:36 lineox kernel: Poopy (ffffffff) on card 4! Mar 27 22:32:36 lineox kernel: Poopy (00) on card 4! Mar 27 22:32:44 lineox last message repeated 527 times What should be the problem?. What am I doing wrong?. my ztcfg -vvv says Zaptel Configuration ===================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 2 channels configured. Thanks a lot in advance for the help. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060327/bb512e75/attachment.htm