Hi, does anybody have a working config or tips to connect the welltech wellgate 3804 (4fxo) unit to asterisk via SIP ? I think I register it via SIP with my * box, but when sending calls from * to the wellgate the unit does not pass the call to any of the fxo ports. thanks in advance, -- ------------------------------------------- Erick -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060322/0edf29db/attachment.htm
Gabriel Afana
2006-Mar-23 01:40 UTC
[Asterisk-Users] If a packet is dropped, is it possible to replay the previous packet in Asterisk?
At the VON expo, my SIP workshop mentioned this as a technique to help cover up dropped packets. Has anybody heard anything about Asterisk being able to do this? - Gabe -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060323/c3b33bc9/attachment.htm
On Mar 22, 2006, at 10:24 PM, Erick Perez wrote:> Hi, does anybody have a working config or tips to connect the welltech > wellgate 3804 (4fxo) unit to asterisk via SIP ? > I think I register it via SIP with my * box, but when sending calls > from * to the wellgate the unit does not pass the call to any of the > fxo ports. >I am using the 3701a, which is a 1 FXO 1 FXS deal. The trick for me was the "routing table" or something like that from the Web based configuration screen. There I changed the default for the FXO to point to IP, and the IP to default to the FXO. Then I also have the "line configuration" set so the extension I want to ring ie 2020 is the "hotline" for the FXO. For outbound ones, I think I just have a regular old Dial(SIP/${EXTEN}@2003} in my dialplan where 2003 is the FXO port. HTH? Marty