Will the low cost X100P clones available on ebay provide a solid hardware timing source? Our experience shows that while using ztdummy with no zaptel hardware does allow MeetMe to function, we experience unacceptable levels of delay after four ot five users join the conference. With both TDM400 and Sangoma A101 hardware, we have had 20+ users with no problems. We have a pure VoIP system installed, that has nor PRI or analog lines, but does have a need for MeetMe. If a $15 card will do the trick, we would obviously rather do that than spend a couple hundred bucks for the same thing. This card would not be used for voice, just timing. Thanks, Mike Clark
Mike Clark wrote:> Will the low cost X100P clones available on ebay provide a solid > hardware timing source? Our experience shows that while using ztdummy > with no zaptel hardware does allow MeetMe to function, we experience > unacceptable levels of delay after four ot five users join the > conference. With both TDM400 and Sangoma A101 hardware, we have had > 20+ users with no problems. > > We have a pure VoIP system installed, that has nor PRI or analog > lines, but does have a need for MeetMe. If a $15 card will do the > trick, we would obviously rather do that than spend a couple hundred > bucks for the same thing. This card would not be used for voice, just > timing. > > Thanks, > > Mike Clark > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > lists.digium.com/mailman/listinfo/asterisk-usersThose do not have timing interfaces on them that I am aware of.