What would cause the message: == Primary D-Channel on span 1 up == Primary D-Channel on span 1 up == Primary D-Channel on span 1 up To keep appearing on CLI about once every second? If I do a "zap show status": Description Alarms IRQ bpviol CRC4 T4XXP (PCI) Card 0 Span 1 OK 0 0 0 T4XXP (PCI) Card 0 Span 2 OK 0 0 0 T4XXP (PCI) Card 0 Span 3 UNCONFIGUR 0 0 0 T4XXP (PCI) Card 0 Span 4 UNCONFIGUR 0 0 0 Thanks, Adam The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.