Jarek Jarzebowski
2006-Feb-09 04:32 UTC
[Asterisk-Users] Asterisk 1.2.x + ooh323 from addons - incoming call goes always to default context.
Hi all, I am trying to setup h.323 connection between two asterisks. The situation is like that: asterisk173 only must accept incomming h.323 calls from asterisk172, so asterisk173 is peer and asterisk172 is user, am I right? My config files: Asterisk173: =========== ooh323.conf: ------------ (...) ;Whether asterisk should use fast-start and tunneling for H323 connections. ;Default - yes faststart=no ;h245tunneling=no ;H323-ID to be used for asterisk server ;Default - Asterisk PBX h323id=ObjSysAsterisk e164=100 ;CallerID to use for calls ;Default - Same as h323id callerid=asterisk (...) [asterisk172] type=user context=asterisk172 disallow=all allow=ulaw (...) Asterisk173: ============ ooh323.conf: ------------ (...) ;Whether asterisk should use fast-start and tunneling for H323 connections. ;Default - yes ;faststart=no ;h245tunneling=no ;H323-ID to be used for asterisk server ;Default - Asterisk PBX ;h323id=ObjSysAsterisk h323id=asterisk172 e164=100 ;CallerID to use for calls ;Default - Same as h323id callerid=asterisk ;Whether this asterisk server will use gatekeeper. ;Default - DISABLE ;gatekeeper = DISCOVER ;gatekeeper = a.b.c.d gatekeeper = DISABLE (...) [asterisk173] type=peer ip=83.142.201.173 port=1720 disallow=all allow=ulaw (...) Situation is that call is coming to asterisk173 but it goes to [default] context not to [asterisk172] I have no idea left why it is not going to [asterisk172]. Please give me some advice. P.S. What is the meaning of e164 and FastStart parameters? Regards, -- Jarek -- Jarek