On Tue, January 31, 2006 14:35, bails said:> Hi all, Some friends of mine have an asterisk box which they use for
> outgoing IAX2 via voipbuster.com.
>
> They have been told that they now have an incoming number 0044117*******
>
> The thing is I cant seem to get any debug info on the incoming.
>
> I have tried both sip and IAX trunks but dont see any incoming info.
>
> Anyone have any idea what protocol voipbuster use for incoming calls??
>
> Thanks in advance
>
VB incoming ONLY works with SIP, not IAX2, which will be obsoleted shortly
anyway.
Incoming context will be the default SIP inbound context
Incoming DID will be VB username
My (working!) config:
[general]
port = 5060 ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
disallow=all
allow=ilbc
allow=gsm
allow=g726
allow=speex
allow=ulaw
allow=alaw
context = from-trunk ; Send unknown SIP callers to this context
callerid = Unknown
register=telno:passwd:username@sip1.voipbuster.com
[username]
allow=ilbc&gsm&speex&g726&alaw ;currently only G728 and aLaw
supported
auth=md5
canreinvite=no
context=from-pstn ;seems to be ignored :-(
disallow=all
dtmfmode=auto
fromdomain=sip1.voipbuster.com
fromuser=username
host=sip1.voipbuster.com
nat=yes
qualify=1000
realm=sip1.voipbuster.com
secret=XXXXXXXXXXXXXXX
type=friend
username=username
HTH!
--
F Peeters
PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
AMD Duron 1GHz - 1GB - * 1.2.1
2 Sweex HFC-PCI cards