asterisk users - Jan 2006 - Problem configuring Asterisk, Please help me

Hi All,

I am a newbie to VOIP and after some problems I was able to install Asterisk. If
I start Asterisk I could find "Asterisk Ready" at the end and I am
thinking
that Asterisk is started successfully. Later after changing my Extensions.conf
and ser.conf nothing works, I could still see the message "Asterisk
Ready" but
when I try using DIAX and connect to Asterisk nothing happens. From client side
I get Destination unreachable and Asterisk side there are no messages at all.
If someone can direct me to documentation or any other information how to set up
Extensions.conf and ser.conf in detail then that will be a great help for me to
configure Asterisk. I am also attaching my Extensions.conf and
ser.conf, please check them and help me understand where I am going wrong.

Thanks,
Manoj.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sip.conf
Type: application/octet-stream
Size: 19832 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20060117/e6190b0e/sip.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: extensions.conf
Type: application/octet-stream
Size: 2670 bytes
Desc: not available
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20060117/e6190b0e/extensions.obj

Hi Manoj,
you have to configure a IAX endpoint while you have sent a SIP
configuration, with no phone defined. Maybe you could send IAX.CONF so we
could se what is the issue...

Ciao
Mauro

i have not checked your configs, but "Destination Unreachable" is a
message out of the scope of Asterisk. Please check your network
configuration, first you should be able to ping the asterisk box from
the client and viceversa.

Regards

On 1/17/06, mkumar@mantragroup.com <mkumar@mantragroup.com>
wrote:
> Hi All,
>
> I am a newbie to VOIP and after some problems I was able to install
Asterisk. If
> I start Asterisk I could find "Asterisk Ready" at the end and I
am thinking
> that Asterisk is started successfully. Later after changing my
Extensions.conf
> and ser.conf nothing works, I could still see the message "Asterisk
Ready" but
> when I try using DIAX and connect to Asterisk nothing happens. From client
side
> I get Destination unreachable and Asterisk side there are no messages at
all.
> If someone can direct me to documentation or any other information how to
set up
> Extensions.conf and ser.conf in detail then that will be a great help for
me to
> configure Asterisk. I am also attaching my Extensions.conf and
> ser.conf, please check them and help me understand where I am going wrong.
>
> Thanks,
> Manoj.
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>

--
"Su nombre es GNU/Linux, no solamente Linux, mas info en
http://www.gnu.org"