On Mon, 2 Jan 2006, Kristian Larsson wrote:> I have an Avaya IP Office PBX connected to an > Asterisk system via a Sangoma ISDN PRI card. > Dialing from the as > terisk system into the avaya works just fine but > when trying to call from a phone connected to the > avaya syste > m something goes wrong. After punching the first > four digits the Avaya calls out, shouldn't it wait > for all di > gits and then dial out? > If I try to dial a three digit number it waits for > a while then dials. > > Is this some feature to let the CO know of which > area code the calls is going ahead of time? > Is there some way to circumvent this using hacks > on the asterisk side?Looks like you need to enable overlapdial=yes on the Asterisk side. It will then wait for additional digits sent from the Avaya after the initial ones sent with the SETUP. This goes in zapata.conf Steve
I have an Avaya IP Office PBX connected to an Asterisk system via a Sangoma ISDN PRI card. Dialing from the as terisk system into the avaya works just fine but when trying to call from a phone connected to the avaya syste m something goes wrong. After punching the first four digits the Avaya calls out, shouldn't it wait for all di gits and then dial out? If I try to dial a three digit number it waits for a while then dials. Is this some feature to let the CO know of which area code the calls is going ahead of time? Is there some way to circumvent this using hacks on the asterisk side? -- Kristian Larsson, Net At Once AB Email: kristian@netatonce.se Phone: +46 470 592717 Cell: +46 704 910401
You are not gonna be able to modify this behaviour from the asterisk since in your case asterisk is only receiving the digits from someone else (an Avaya in your case but could be PSTN for instance) Just asked an Avaya support guy and told me you should take a look at the ARS Digit Analysis Table, and modify the Min and Max values to suit your needs. Hope this helps ww6 ---------------------------------------- Return-Path: <asterisk-users-bounces@lists.digium.com> Mon Jan 02 05:56:31 2006 Received: from digium-69-16-138-164.phx1.puregig.net [69.16.138.164] by mail11.webcontrolcenter.com with SMTP; Mon, 2 Jan 2006 05:56:31 -0700 Received: from digium-69-16-138-164.phx1.puregig.net (localhost [127.0.0.1]) by lists.digium.com (Postfix) with ESMTP id C0C434092; Mon, 2 Jan 2006 05:55:56 -0700 (MST) Received: from psmtp.com (exprod5mx128.postini.com [64.18.0.42]) by lists.digium.com (Postfix) with SMTP id 20B414082 for <asterisk-users@lists.digium.com>; Mon, 2 Jan 2006 05:55:52 -0700 (MST) Received: from source ([217.10.96.36]) by exprod5mx128.postini.com ([64.18.4.10]) with SMTP; Mon, 02 Jan 2006 06:55:53 CST Received: from localhost (localhost [127.0.0.1]) by mailfront1.citynet.nu (Postfix) with ESMTP id 892034C08A for <asterisk-users@lists.digium.com>; Mon, 2 Jan 2006 13:55:53 +0100 (CET) Received: from mailfront1.citynet.nu ([127.0.0.1]) by localhost (mailfront1.citynet.nu [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 17711-06 for <asterisk-users@lists.digium.com>; Mon, 2 Jan 2006 13:55:53 +0100 (CET) Received: from localhost (unknown [10.1.2.65]) by mailfront1.citynet.nu (Postfix) with ESMTP id 236B64C06A for <asterisk-users@lists.digium.com>; Mon, 2 Jan 2006 13:55:52 +0100 (CET) X-Original-To: asterisk-users@lists.digium.com Delivered-To: asterisk-users@lists.digium.com Date: Mon, 2 Jan 2006 15:52:51 +0100 From: Kristian Larsson <kristian@netatonce.se> To: asterisk-users@lists.digium.com Message-ID: <20060102145251.GD9366@juniks.net> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline User-Agent: Mutt/1.5.8i X-Virus-Scanned: by amavis at citynet.nu X-Spam-Status: No, hits=-3.8 tagged_above=-999.0 required=999.0 tests=ALL_TRUSTED, BAYES_05 X-Spam-Level: X-pstn-levels: (S:65.75150/99.90000 ) X-pstn-settings: 1 (0.1500:0.1500) gt3 gt2 gt1 X-pstn-addresses: from <kristian@netatonce.se> [90/4] Subject: [Asterisk-Users] Asterisk PRI problems. X-BeenThere: asterisk-users@lists.digium.com X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> List-Id: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users.lists.digium.com> List-Unsubscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>, <mailto:asterisk-users-request@lists.digium.com?subject=unsubscribe> List-Archive: <http://lists.digium.com/pipermail/asterisk-users> List-Post: <mailto:asterisk-users@lists.digium.com> List-Help: <mailto:asterisk-users-request@lists.digium.com?subject=help> List-Subscribe: <http://lists.digium.com/mailman/listinfo/asterisk-users>, <mailto:asterisk-users-request@lists.digium.com?subject=subscribe> Sender: asterisk-users-bounces@lists.digium.com Errors-To: asterisk-users-bounces@lists.digium.com X-SmarterMail-Spam: SPF_None X-Rcpt-To: <alyed.tzompa@simitel.com> I have an Avaya IP Office PBX connected to an Asterisk system via a Sangoma ISDN PRI card. Dialing from the as terisk system into the avaya works just fine but when trying to call from a phone connected to the avaya syste m something goes wrong. After punching the first four digits the Avaya calls out, shouldn't it wait for all di gits and then dial out? If I try to dial a three digit number it waits for a while then dials. Is this some feature to let the CO know of which area code the calls is going ahead of time? Is there some way to circumvent this using hacks on the asterisk side? -- Kristian Larsson, Net At Once AB Email: kristian@netatonce.se Phone: +46 470 592717 Cell: +46 704 910401 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060102/efa3b86a/attachment.htm
It should be possible, but I think that the problem lies in the connection between Avaya and Asterisk, let me explain: your Avaya most likely uses different connection parametrs for handling the calls coming from /going to PSTN and the ones coming from /going to Asterisk. If you need to pass let's say extensions' 20XX traffic, from Avaya through Asterisk, just set this in the Avaya and let it dial to Asterisk as if it was another extension, once in the Asterisk, you can handle it with the extensions.conf Alyed ---------------------------------------- Return-Path: <kristian@netatonce.se> Tue Jan 03 00:22:49 2006 Received: from mailfront1.citynet.nu [217.10.96.36] by mail11.webcontrolcenter.com with SMTP; Tue, 3 Jan 2006 00:22:49 -0700 Received: from localhost (localhost [127.0.0.1]) by mailfront1.citynet.nu (Postfix) with ESMTP id 76B104C0A0; Tue, 3 Jan 2006 08:22:47 +0100 (CET) Received: from mailfront1.citynet.nu ([127.0.0.1]) by localhost (mailfront1.citynet.nu [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 12166-02; Tue, 3 Jan 2006 08:22:46 +0100 (CET) Received: from localhost (unknown [10.1.2.65]) by mailfront1.citynet.nu (Postfix) with ESMTP id 3D43F4C08A; Tue, 3 Jan 2006 08:22:45 +0100 (CET) Date: Tue, 3 Jan 2006 10:19:45 +0100 From: Kristian Larsson <kristian@netatonce.se> To: alyed.tzompa@simitel.com, Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Subject: Re: [Asterisk-Users] Asterisk PRI problems. Message-ID: <20060103091945.GA21352@juniks.net> References: <05db140eaa38451c887627d047a03e4d@simitel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline In-Reply-To: <05db140eaa38451c887627d047a03e4d@simitel.com> User-Agent: Mutt/1.5.8i X-Virus-Scanned: by amavis at citynet.nu X-Spam-Status: No, hits=-4.5 tagged_above=-999.0 required=999.0 tests=ALL_TRUSTED, BAYES_00 X-Spam-Level: X-SmarterMail-Spam: SPF_None On Mon, Jan 02, 2006 at 12:09:33PM -0700, Alyed Tzompa wrote:> You are not gonna be able to modify this behaviour from the asterisk since in your case asterisk is only receiving the digits from someone else (an Avaya in your case but could be PSTN for instance) > > Just asked an Avaya support guy and told me you should take a look at the ARS Digit Analysis Table, and modify the Min and Max values to suit your needs.I just found something called "digit delay time" and "digit delay count", it just happens so that digit delay count is set to four, ie the number of digits before the avaya dials out. I can not try it out right now since the system is being used - has to wait for the maintenance window tomorrown evening. But what I find a little strange is that the Avaya works when connected to my telco, shouldn't it be possibly to simulate a telco fully with Asterisk? Thanks Alyed! Kristian.> Hope this helps > ww6 > > ---------------------------------------- > Return-Path: Mon Jan 02 05:56:31 2006 > Received: from digium-69-16-138-164.phx1.puregig.net [69.16.138.164] by mail11.webcontrolcenter.com with SMTP; > Mon, 2 Jan 2006 05:56:31 -0700 > Received: from digium-69-16-138-164.phx1.puregig.net (localhost [127.0.0.1]) > by lists.digium.com (Postfix) with ESMTP id C0C434092; > Mon, 2 Jan 2006 05:55:56 -0700 (MST) > Received: from psmtp.com (exprod5mx128.postini.com [64.18.0.42]) > by lists.digium.com (Postfix) with SMTP id 20B414082 > for ; > Mon, 2 Jan 2006 05:55:52 -0700 (MST) > Received: from source ([217.10.96.36]) by exprod5mx128.postini.com > ([64.18.4.10]) with SMTP; Mon, 02 Jan 2006 06:55:53 CST > Received: from localhost (localhost [127.0.0.1]) > by mailfront1.citynet.nu (Postfix) with ESMTP id 892034C08A > for ; > Mon, 2 Jan 2006 13:55:53 +0100 (CET) > Received: from mailfront1.citynet.nu ([127.0.0.1]) > by localhost (mailfront1.citynet.nu [127.0.0.1]) (amavisd-new, > port 10024) > with ESMTP id 17711-06 for ; > Mon, 2 Jan 2006 13:55:53 +0100 (CET) > Received: from localhost (unknown [10.1.2.65]) > by mailfront1.citynet.nu (Postfix) with ESMTP id 236B64C06A > for ; > Mon, 2 Jan 2006 13:55:52 +0100 (CET) > X-Original-To: asterisk-users@lists.digium.com > Delivered-To: asterisk-users@lists.digium.com > Date: Mon, 2 Jan 2006 15:52:51 +0100 > From: Kristian Larsson > To: asterisk-users@lists.digium.com > Message-ID: <20060102145251.GD9366@juniks.net> > Mime-Version: 1.0 > Content-Type: text/plain; charset=iso-8859-15 > Content-Disposition: inline > User-Agent: Mutt/1.5.8i > X-Virus-Scanned: by amavis at citynet.nu > X-Spam-Status: No, hits=-3.8 tagged_above=-999.0 required=999.0 > tests=ALL_TRUSTED, BAYES_05 > X-Spam-Level: > X-pstn-levels: (S:65.75150/99.90000 ) > X-pstn-settings: 1 (0.1500:0.1500) gt3 gt2 gt1 > X-pstn-addresses: from [90/4] > Subject: [Asterisk-Users] Asterisk PRI problems. > X-BeenThere: asterisk-users@lists.digium.com > X-Mailman-Version: 2.1.5 > Precedence: list > Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion > > List-Id: Asterisk Users Mailing List - Non-Commercial Discussion > > List-Unsubscribe: , > > List-Archive: > List-Post: > List-Help: > List-Subscribe: , > > Sender: asterisk-users-bounces@lists.digium.com > Errors-To: asterisk-users-bounces@lists.digium.com > X-SmarterMail-Spam: SPF_None > X-Rcpt-To: > > I have an Avaya IP Office PBX connected to an > Asterisk system via a Sangoma ISDN PRI card. > Dialing from the as > terisk system into the avaya works just fine but > when trying to call from a phone connected to the > avaya syste > m something goes wrong. After punching the first > four digits the Avaya calls out, shouldn't it wait > for all di > gits and then dial out? > If I try to dial a three digit number it waits for > a while then dials. > > Is this some feature to let the CO know of which > area code the calls is going ahead of time? > Is there some way to circumvent this using hacks > on the asterisk side? > > -- > Kristian Larsson, Net At Once AB > Email: kristian@netatonce.se > Phone: +46 470 592717 > Cell: +46 704 910401 > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >> _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- Kristian Larsson, Net At Once AB Email: kristian@netatonce.se Phone: +46 470 592717 Cell: +46 704 910401 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060103/226153bc/attachment.htm
We cheated with ours. One our ECS we did a "change dialplan parameters" and added routing pattern 31 to the "ETA" Once this was done we programmed routing pattern 31 to send via the appropriate signaling/trunk group out to Asterisk. The end result was that if the Avaya didnt know the extension from its own tables, it sent it to Asterisk to handle. Jonathan O'Connor Senior System Administrator Inoveris LLC Direct Line (614) 791-3742 Fax (614) 791-3748 Helpdesk 866-456-1566 ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alyed Tzompa Sent: Tuesday, January 03, 2006 1:53 PM To: kristian@netatonce.se; asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Asterisk PRI problems. It should be possible, but I think that the problem lies in the connection between Avaya and Asterisk, let me explain: your Avaya most likely uses different connection parametrs for handling the calls coming from /going to PSTN and the ones coming from /going to Asterisk. If you need to pass let's say extensions' 20XX traffic, from Avaya through Asterisk, just set this in the Avaya and let it dial to Asterisk as if it was another extension, once in the Asterisk, you can handle it with the extensions.conf Alyed ________________________________ Return-Path: <kristian@netatonce.se> Tue Jan 03 00:22:49 2006 Received: from mailfront1.citynet.nu [217.10.96.36] by mail11.webcontrolcenter.com with SMTP; Tue, 3 Jan 2006 00:22:49 -0700 Received: from localhost (localhost [127.0.0.1]) by mailfront1.citynet.nu (Postfix) with ESMTP id 76B104C0A0; Tue, 3 Jan 2006 08:22:47 +0100 (CET) Received: from mailfront1.citynet.nu ([127.0.0.1]) by localhost (mailfront1.citynet.nu [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 12166-02; Tue, 3 Jan 2006 08:22:46 +0100 (CET) Received: from localhost (unknown [10.1.2.65]) by mailfront1.citynet.nu (Postfix) with ESMTP id 3D43F4C08A; Tue, 3 Jan 2006 08:22:45 +0100 (CET) Date: Tue, 3 Jan 2006 10:19:45 +0100 From: Kristian Larsson <kristian@netatonce.se> To: alyed.tzompa@simitel.com, Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Subject: Re: [Asterisk-Users] Asterisk PRI problems. Message-ID: <20060103091945.GA21352@juniks.net> References: <05db140eaa38451c887627d047a03e4d@simitel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Disposition: inline In-Reply-To: <05db140eaa38451c887627d047a03e4d@simitel.com> User-Agent: Mutt/1.5.8i X-Virus-Scanned: by amavis at citynet.nu X-Spam-Status: No, hits=-4.5 tagged_above=-999.0 required=999.0 tests=ALL_TRUSTED, BAYES_00 X-Spam-Level: X-SmarterMail-Spam: SPF_None On Mon, Jan 02, 2006 at 12:09:33PM -0700, Alyed Tzompa wrote: > You are not gonna be able to modify this behaviour from the asterisk since in your case asterisk is only receiving the digits from someone else (an Avaya in your case but could be PSTN for instance) > > Just asked an Avaya support guy and told me you should take a look at the ARS Digit Analysis Table, and modify the Min and Max values to suit your needs. I just found something called "digit delay time" and "digit delay count", it just happens so that digit delay count is set to four, ie the number of digits before the avaya dials out. I can not try it out right now since the system is being used - has to wait for the maintenance window tomorrown evening. But what I find a little strange is that the Avaya works when connected to my telco, shouldn't it be possibly to simulate a telco fully with Asterisk? Thanks Alyed! Kristian. > Hope this helps > ww6 > > ---------------------------------------- > Return-Path: Mon Jan 02 05:56:31 2006 > Received: from digium-69-16-138-164.phx1.puregig.net [69.16.138.164] by mail11.webcontrolcenter.com with SMTP; > Mon, 2 Jan 2006 05:56:31 -0700 > Received: from digium-69-16-138-164.phx1.puregig.net (localhost [127.0.0.1]) > by lists.digium.com (Postfix) with ESMTP id C0C434092; > Mon, 2 Jan 2006 05:55:56 -0700 (MST) > Received: from psmtp.com (exprod5mx128.postini.com [64.18.0.42]) > by lists.digium.com (Postfix) with SMTP id 20B414082 > for ; > Mon, 2 Jan 2006 05:55:52 -0700 (MST) > Received: from source ([217.10.96.36]) by exprod5mx128.postini.com > ([64.18.4.10]) with SMTP; Mon, 02 Jan 2006 06:55:53 CST > Received: from localhost (localhost [127.0.0.1]) > by mailfront1.citynet.nu (Postfix) with ESMTP id 892034C08A > for ; > Mon, 2 Jan 2006 13:55:53 +0100 (CET) > Received: from mailfront1.citynet.nu ([127.0.0.1]) > by localhost (mailfront1.citynet.nu [127.0.0.1]) (amavisd-new, > port 10024) > with ESMTP id 17711-06 for ; > Mon, 2 Jan 2006 13:55:53 +0100 (CET) > Received: from localhost (unknown [10.1.2.65]) > by mailfront1.citynet.nu (Postfix) with ESMTP id 236B64C06A > for ; > Mon, 2 Jan 2006 13:55:52 +0100 (CET) > X-Original-To: asterisk-users@lists.digium.com > Delivered-To: asterisk-users@lists.digium.com > Date: Mon, 2 Jan 2006 15:52:51 +0100 > From: Kristian Larsson > To: asterisk-users@lists.digium.com > Message-ID: <20060102145251.GD9366@juniks.net> > Mime-Version: 1.0 > Content-Type: text/plain; charset=iso-8859-15 > Content-Disposition: inline > User-Agent: Mutt/1.5.8i > X-Virus-Scanned: by amavis at citynet.nu > X-Spam-Status: No, hits=-3.8 tagged_above=-999.0 required=999.0 > tests=ALL_TRUSTED, BAYES_05 > X-Spam-Level: > X-pstn-levels: (S:65.75150/99.90000 ) > X-pstn-settings: 1 (0.1500:0.1500) gt3 gt2 gt1 > X-pstn-addresses: from [90/4] > Subject: [Asterisk-Users] Asterisk PRI problems. > X-BeenThere: asterisk-users@lists.digium.com > X-Mailman-Version: 2.1.5 > Precedence: list > Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion > > List-Id: Asterisk Users Mailing List - Non-Commercial Discussion > > List-Unsubscribe: , > > List-Archive: > List-Post: > List-Help: > List-Subscribe: , > > Sender: asterisk-users-bounces@lists.digium.com > Errors-To: asterisk-users-bounces@lists.digium.com > X-SmarterMail-Spam: SPF_None > X-Rcpt-To: > > I have an Avaya IP Office PBX connected to an > Asterisk system via a Sangoma ISDN PRI card. > Dialing from the as > terisk system into the avaya works just fine but > when trying to call from a phone connected to the > avaya syste > m something goes wrong. After punching the first > four digits the Avaya calls out, shouldn't it wait > for all di > gits and then dial out? > If I try to dial a three digit number it waits for > a while then dials. > > Is this some feature to let the CO know of which > area code the calls is going ahead of time? > Is there some way to circumvent this using hacks > on the asterisk side? > > -- > Kristian Larsson, Net At Once AB > Email: kristian@netatonce.se > Phone: +46 470 592717 > Cell: +46 704 910401 > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Kristian Larsson, Net At Once AB Email: kristian@netatonce.se Phone: +46 470 592717 Cell: +46 704 910401 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060103/2b97c88f/attachment.htm