I'm trying to set up call transfer and automon options. They work fine with ZAP lines (analog telephone) and with Grandstream Budgetone 102. I have problem with Cisco 7905 and 7940. I think that problem is with dtmf signalization. This is my configuration in 7940 dtmf_inband: 1 dtmf_outofband: none dtmf_db_level: 3 And 7905 AudioMode:0x00000000 Is my configuration wrong or it doesn't work with Cisco phones? Thank you for your time! -- Tomislav Parcina ime.prezime@email.t-com.hr
I use: # Enable_VAD (1-enabled, 0-disabled) enable_vad: "0" dtmf_inband: "1" dtmf_outofband: "never" dtmf_avt_payload: "101" and it works well for me. Sometimes going through a callmanager I have to set outofband to avt to get dialtone sent though. On Tue, 2005-12-27 at 16:05 +0100, Tomislav Parcina wrote:> I'm trying to set up call transfer and automon options. They work fine > with ZAP lines (analog telephone) and with Grandstream Budgetone 102. I > have problem with Cisco 7905 and 7940. I think that problem is with dtmf > signalization. > > This is my configuration in 7940 > dtmf_inband: 1 > dtmf_outofband: none > dtmf_db_level: 3 > > And 7905 > AudioMode:0x00000000 > > Is my configuration wrong or it doesn't work with Cisco phones? > > Thank you for your time! > >
In article <1135711410.8689.9.camel@localhost>, goliver@cistera.com says...> I use: > > # Enable_VAD (1-enabled, 0-disabled) > enable_vad: "0" > dtmf_inband: "1" > dtmf_outofband: "never" > dtmf_avt_payload: "101" > > and it works well for me. Sometimes going through a callmanager I have > to set outofband to avt to get dialtone sent though.Thank you! This one works for me. -- Tomislav Parcina ime.prezime@email.t-com.hr