asterisk users - Dec 2005 - Re: Fw: Legacy PBX -> * -> Voip Calls problems

Scott,
Great, really!
I'll remember that "the correct T1 Crossover cable"!
And I was correct thinking that with *+TE110P a legacy
PBX becomes simply a 400-slots-channel bank, wasn't I?
Thanks again and Merry Christmas;,
benchev
On Thursday 22 December 2005 22:29, Scott Wolfe wrote:
> Hi there,
>   I was able to get this going. I just needed to create a dialing plan in
> the Mitel so that calls would go through the asterisk box.
>
> The Mitel I was using is not the IP Mitel.
>
> It works and the only hang up I had was making sure I had made the correct
> T1 Crossover cable.
>
>  -Scott
>
>
> ----- Original Message -----
> From: <mgmvoip@mgmvoip.com>
> To: <scottwolfe@orbus.net>
> Cc: "Asterisk-users-list" <asterisk-users@lists.digium.com>
> Sent: Thursday, December 22, 2005 11:40 AM
> Subject: Legacy PBX -> * -> Voip Calls problems
>
> > >If have installed a TE110P and have connected it to my Mitel
200SX. I
> > > can
> >>
> >>dial to the Mitel via the T1 connection but when I dial from the
Mitel to
> >>try and go out the Asterisk box via Voip it fails. I can see the
calls
> >>getting to the Asterisk box from the Mitel but it just loops though
its
> >>Zap
> >>channels then fails. Do I have spilt incoming and out going
channels on a
> >>T1?
> >>Thanks,
> >>
> >>  -Scott
> >
> > Scott,
> > Sorry for approaching you personally
> > but not sure you are still subscribed to the list
> > (copy to the list anyway)
> > I have found your efforts about "Legacy PBX -> * -> Voip
Calls problems"
> > goggling but not a full thread. Your scheme is very intriguing
> > since I intend to interconnect an  *+TE110P ->(PRI)->Siemens
HiPath3750.
> > Asterisk+TE110P will provide only VOIP dialing to the Siemens
HiPath3750
> > members(about 400). Mitel is more more IP oriented than Siemens but
any
> > info
> > you could point me to, or share would be of great value.
> > Thanks and Merry Xmas everyone,
> > benchev