Bob Lichtenberg
2005-Dec-16 13:24 UTC
[Asterisk-Users] Asterisk-1.2.1 incomplete DID number on incoming T1 line
I am presently running asterisk 1.0.9 with AMP and a Sangoma A101 card
with a T1 line and 12 channels. It has run solidly for four months.
It receives a 4 digit DID number "9140".
zaptel.conf
span=1,0,0,esf,b8zs
e&m=1-12
I have been testing Asterisk-1.2.1 on a duplicate set of hardware using
the same Sangoma card and AMP-1.10.010. Internally the system works
fine as well as Voicemail, but when receiving an outside call, the
first call rings into the system as normal. The second, third, fourth,
etc call have only the first DID digit "9" and then the system hangs
up. The caller hears a busy signal. If I restart Asterisk then I can
repeat the process of one good call and the rest busy signals. I have
been in contact with Sangoma, but am not sure that it is a problem with
their software. Any thoughts. Thanks. /var/log/asterisk/full [snip]
****First Call******
Dec 15 05:44:16 VERBOSE[31698] logger.c: -- Starting simple switch
on 'Zap/12-1'
Dec 15 05:44:16 DEBUG[31680] acl.c: ##### Testing 192.168.10.135 with
192.168.0.0
Dec 15 05:44:16 DEBUG[31698] chan_zap.c: DTMF digit: 9 on Zap/12-1
Dec 15 05:44:16 DEBUG[31698] chan_zap.c: DTMF digit: 1 on Zap/12-1
Dec 15 05:44:17 DEBUG[31698] chan_zap.c: DTMF digit: 4 on Zap/12-1
Dec 15 05:44:17 DEBUG[31698] chan_zap.c: DTMF digit: 0 on Zap/12-1
Dec 15 05:44:17 DEBUG[31698] chan_zap.c: Enabled echo cancellation on
channel 12
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
SetVar("Zap/12-1", "FROM_DID=9140") in new stack
Dec 15 05:44:17 WARNING[31698] pbx.c: SetVar is deprecated, please use
Set instead.
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
Goto("Zap/12-1", "from-pstn|s|1") in new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Goto (from-pstn,s,1)
Dec 15 05:44:17 DEBUG[31698] pbx.c: Expression result is '0'
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
GotoIf("Zap/12-1", "0?from-pstn-reghours|s|1:") in new stack
Dec 15 05:44:17 DEBUG[31698] pbx.c: Not taking any branch
Dec 15 05:44:17 DEBUG[31698] pbx.c: Expression result is '0'
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
GotoIf("Zap/12-1", "0?from-pstn-afthours|s|1:") in new stack
Dec 15 05:44:17 DEBUG[31698] pbx.c: Not taking any branch
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
GotoIfTime("Zap/12-1",
"8:00-17:00|mon-fri|*|*?from-pstn-reghours|s|1:") in new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
Goto("Zap/12-1", "from-pstn-afthours|s|1") in new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Goto (from-pstn-afthours,s,1)
Dec 15 05:44:17 DEBUG[31698] pbx.c: Expression result is '1'
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
GotoIf("Zap/12-1", "1?from-pstn-afthours-nofax|s|1:2") in
new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Goto
(from-pstn-afthours-nofax,s,1)
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
SetVar("Zap/12-1", "intype=aa_2") in new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
Cut("Zap/12-1", "intype=intype|-|1") in new stack
Dec 15 05:44:17 WARNING[31698] app_cut.c: The application Cut is
deprecated. Please use the CUT() function instead.
Dec 15 05:44:17 DEBUG[31698] pbx.c: Expression result is '0'
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
GotoIf("Zap/12-1", "0?4:5") in new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Goto
(from-pstn-afthours-nofax,s,5)
Dec 15 05:44:17 DEBUG[31698] pbx.c: Expression result is '0'
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
GotoIf("Zap/12-1", "0?6:7") in new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Goto
(from-pstn-afthours-nofax,s,7)
Dec 15 05:44:17 DEBUG[31698] pbx.c: Expression result is '0'
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
GotoIf("Zap/12-1", "0?8:11") in new stack
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Goto
(from-pstn-afthours-nofax,s,11)
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
Answer("Zap/12-1", "") in new stack
Dec 15 05:44:17 DEBUG[31698] chan_zap.c: Took Zap/12-1 off hook
Dec 15 05:44:17 VERBOSE[31698] logger.c: -- Executing
Wait("Zap/12-1", "1") in new stack
Dec 15 05:44:18 VERBOSE[31698] logger.c: -- Executing
Goto("Zap/12-1", "aa_2|s|1") in new stack
Dec 15 05:44:18 VERBOSE[31698] logger.c: -- Goto (aa_2,s,1)
*****Second Call****
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Starting simple switch
on 'Zap/12-1'
Dec 15 05:44:45 DEBUG[31680] chan_sip.c: Auto destroying call
'ed661c18-db2fd42-cab69145@192.168.10.135'
Dec 15 05:44:45 DEBUG[31710] chan_zap.c: DTMF digit: 9 on Zap/12-1
Dec 15 05:44:45 DEBUG[31710] chan_zap.c: Enabled echo cancellation on
channel 12
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
SetVar("Zap/12-1", "FROM_DID=9140") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
Goto("Zap/12-1", "from-pstn|s|1") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Goto (from-pstn,s,1)
Dec 15 05:44:45 DEBUG[31710] pbx.c: Expression result is '0'
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
GotoIf("Zap/12-1", "0?from-pstn-reghours|s|1:") in new stack
Dec 15 05:44:45 DEBUG[31710] pbx.c: Not taking any branch
Dec 15 05:44:45 DEBUG[31710] pbx.c: Expression result is '0'
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
GotoIf("Zap/12-1", "0?from-pstn-afthours|s|1:") in new stack
Dec 15 05:44:45 DEBUG[31710] pbx.c: Not taking any branch
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
GotoIfTime("Zap/12-1",
"8:00-17:00|mon-fri|*|*?from-pstn-reghours|s|1:") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
Goto("Zap/12-1", "from-pstn-afthours|s|1") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Goto (from-pstn-afthours,s,1)
Dec 15 05:44:45 DEBUG[31710] pbx.c: Expression result is '1'
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
GotoIf("Zap/12-1", "1?from-pstn-afthours-nofax|s|1:2") in
new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Goto
(from-pstn-afthours-nofax,s,1)
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
SetVar("Zap/12-1", "intype=aa_2") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
Cut("Zap/12-1", "intype=intype|-|1") in new stack
Dec 15 05:44:45 DEBUG[31710] pbx.c: Expression result is '0'
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
GotoIf("Zap/12-1", "0?4:5") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Goto
(from-pstn-afthours-nofax,s,5)
Dec 15 05:44:45 DEBUG[31710] pbx.c: Expression result is '0'
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
GotoIf("Zap/12-1", "0?6:7") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Goto
(from-pstn-afthours-nofax,s,7)
Dec 15 05:44:45 DEBUG[31710] pbx.c: Expression result is '0'
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
GotoIf("Zap/12-1", "0?8:11") in new stack
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Goto
(from-pstn-afthours-nofax,s,11)
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
Answer("Zap/12-1", "") in new stack
Dec 15 05:44:45 DEBUG[31710] chan_zap.c: Took Zap/12-1 off hook
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
Wait("Zap/12-1", "1") in new stack
Dec 15 05:44:45 DEBUG[31710] chan_zap.c: Exception on 24, channel 12
Dec 15 05:44:45 DEBUG[31710] chan_zap.c: Got event On hook(1) on
channel 12 (index 0)
Dec 15 05:44:45 DEBUG[31710] chan_zap.c: disabled echo cancellation on
channel 12
Dec 15 05:44:45 VERBOSE[31710] logger.c: == Spawn extension
(from-pstn-afthours-nofax, s, 12) exited non-zero on 'Zap/12-1'
Dec 15 05:44:45 VERBOSE[31710] logger.c: -- Executing
Hangup("Zap/12-1", "") in new stack