Hi guys,
is there somebody that have experience setting up an Asterisk box with
Sangoma card, in Romania?
I've installed Asterisk-1.2.1 with UniCall-0.0.3pre8.
Wanrouter-status says "connected", ztcfg says:
[root@asterisk-rom asterisk]# cat /proc/zaptel/1
Span 1: WPE1/0 "wanpipe1 card 0" AMI/
1 WPE1/0/1 CAS
2 WPE1/0/2 CAS
3 WPE1/0/3 CAS
4 WPE1/0/4 CAS
5 WPE1/0/5 CAS
6 WPE1/0/6 CAS
7 WPE1/0/7 CAS
8 WPE1/0/8 CAS
9 WPE1/0/9 CAS
10 WPE1/0/10 CAS
11 WPE1/0/11 CAS
12 WPE1/0/12 CAS
13 WPE1/0/13 CAS
14 WPE1/0/14 CAS
15 WPE1/0/15 CAS
16 WPE1/0/16 HDLCFCS
17 WPE1/0/17 CAS
18 WPE1/0/18 CAS
19 WPE1/0/19 CAS
20 WPE1/0/20 CAS
21 WPE1/0/21 CAS
22 WPE1/0/22 CAS
23 WPE1/0/23 CAS
24 WPE1/0/24 CAS
25 WPE1/0/25 CAS
26 WPE1/0/26 CAS
27 WPE1/0/27 CAS
28 WPE1/0/28 CAS
29 WPE1/0/29 CAS
30 WPE1/0/30 CAS
31 WPE1/0/31 CAS
I've also, as suggested, to cut-off the channel 16, but nothing is changed.
Dialing a number, this is what I receive:
------------------
-- Accepting AUTHENTICATED call from XXX.XXX.XXX.XXX:
> requested format = gsm,
> requested prefs = (),
> actual format = gsm,
> host prefs = (gsm|ulaw|alaw),
> priority = mine
-- Executing SetCallerID("IAX2/USER-3", "XXXXXXXX") in
new stack
-- Executing Dial("IAX2/USER-3", "UniCall/g1/XXXXXXXXX")
in new stack
Dec 16 12:04:04 WARNING[8205]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Call control(1)
Dec 16 12:04:04 WARNING[8205]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Make call
Dec 16 12:04:04 WARNING[8205]: chan_unicall.c:1077 unicall_call: Make call
failed - Blocked
-- Couldn't call g1/XXXXXXXXX
Dec 16 12:04:04 WARNING[8205]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Channel gains
Dec 16 12:04:04 WARNING[8205]: chan_unicall.c:627 unicall_report: MFC/R2
UniCall/1 Channel switching
-- Hungup 'UniCall/1-1'
== Everyone is busy/congested at this time (0:0/0/0)
-- Timeout on IAX2/USER-3
== CDR updated on IAX2/USER-3
-- Executing Hangup("IAX2/USER", "") in new stack
== Spawn extension (trunk, t, 1) exited non-zero on 'IAX2/USER-3'
-- Hungup 'IAX2/USER-3'
------------------
my unicall.conf:
------------------
[channels]
context=trunk
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
immediate=yes
amaflags=billing
protocolclass=mfcr2
protocolvariant=ro,20,9
protocolend=cpe
loglevel=255
group = 1
channel => 1-15
;skip time slot 16
channel => 17-31
------------------
Any ideas, suggenstions?
If you need more infos, just ask.
Thanks a lot!
--
.:FaberK:.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051216/6fa3b81b/attachment.htm