asterisk users - Dec 2005 - Connecting Meridian M8x24-DS to Asterisk - No DTMFtones

> 
> 
> Sorry, this is slightly off topic, but I wonder if somebody has some
> hints on getting our Meridian system to output DTMF tones to our
> Asterisk box.  Simply put, when buttons as pressed, nothing happens.
> 
> The Asterisk box has a 4 port Digium FXO card.
> 
> This is what we've got:
> 
> Meridian M8X24-DS
> Meridian M12X0
> 
> Thanks for any tips!
> 
> 
> Phil
Have you put a butt set on the line and listen to see if there is DTMF
and it is just not being recognized?

On Dec 15, 2005, at 6:23 PM, Steve Totaro wrote:
>>
>>
>> Sorry, this is slightly off topic, but I wonder if somebody has some
>> hints on getting our Meridian system to output DTMF tones to our
>> Asterisk box.  Simply put, when buttons as pressed, nothing happens.
>>
>> The Asterisk box has a 4 port Digium FXO card.
>>
>> This is what we've got:
>>
>> Meridian M8X24-DS
>> Meridian M12X0
>>
>> Thanks for any tips!
>>
>>
>> Phil
Hey, thanks for the response.

I have another system (Toshiba) which works fine with it, so I'm  
doubting that it's a issue specifically with the Asterisk server or  
it being able to properly decode the tones.
> Have you put a butt set on the line and listen to see if there is DTMF
> and it is just not being recognized?
I've done similar tests where instead of the asterisk server, I used  
a phone instead.  When buttons are hit, no tones are emitted from the  
Meridian, but a little acknoledge beep on the Meridian phone is heard  
as buttons are pressed.  It seems to me like a programming or some  
other issue on the Meridian.  But, I don't know where to start to  
correct it.  The tech is completely MIA after my call to set up an  
appointment.  I might have to call another service group.  I'm fairly  
competent at managing and building out Toshiba DK systems (I maintain  
two DK40's), but this Meridian was sort of inherited from another  
source.


Phil