thr3ads.net - asterisk users - [Asterisk-Users] Nortel Meridian Option81C to TE405P [Dec 2005]

If this information is useful, please help other people find it:
Share via:

Anish Basu

2005-Dec-06 15:59 UTC

[Asterisk-Users] Nortel Meridian Option81C to TE405P

Hi,

I am having problems connecting a Nortel Meridian Option 81C PBX to my
Asterisk 1.20 server.  We are using the TE405P card with one crossover PRI
T1 cable connecting the two systems.  The lights on the back of the TE405P
are green and zttool shows that the span is okay.  Calls cannot be made and
'pri show span 1' shows the d-channel as down.  If anyone has any
experience
with this, suggestions and tips are greatly appreciatd.  If we cannot get
this resolved within the next few days, we are willing to pay consulting
fees for help.  The config files are as listed below.  Thanks for any help
in advance.


zaptel.conf
-----------
loadzone = us
defaultzone=us
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24

zapata.conf
-----------
[trunkgroups]

[channels]
language=en
switchtype=5ess
context=from-pbx
signalling=pri_net
group=1
callgroup=1
pickupgroup=1
channel => 1-23
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
faxdetect=both
musiconhold=default

Nortel configuration: b-channel,d-channel, and route data block
---------------------------------------------------------------
REQ  prt
TYPE adan dch 10

ADAN     DCH 10
  CTYP MSDL
  GRP  3
  DNUM 2
  PORT 0
  DES  VresaBridge
  USR  PRI
  DCHL 101
  OTBF 32
  PARM RS422  DTE
  DRAT 64KC
  CLOK EXT
  IFC  ESS5
  SIDE USR
  CNEG 1
  RLS  ID  1
  RCAP ND2
  MBGA NO
  OVLR NO
  OVLS NO
  T200 3
  T203 10
  N200 3
  N201 260
  K    7


ROUT 1

TYPE RDB
CUST 00
ROUT 1
DES  VERSA
TKTP TIE
NPID_TBL_NUM   0
ESN  NO
CNVT NO
SAT  NO
RCLS EXT
VTRK NO
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
    MODE PRA
    IFC  ESS5
    SBN  NO
    PNI  00001
    SRVC NNSF
    NCNA YES
    NCRD YES
    CHTY BCH
    CTYP UKWN
    INAC YES
    ISAR NO
    CPUB OFF
    DAPC NO
    BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 8901
TCPP NO
PII NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC  NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
ICIS YES
TIMR ICF  512
     OGF  512
     EOD  13952
     NRD  10112
     DDL  70
     ODT  4096
     RGV  640
     GRD  896
     SFB  3
     NBS  2048


PAGE 002

     NBL  4096

     IENB  5
     TFD  0
     VSS  0
     VGD  6
DRNG NO
CDR  NO
VRAT NO
MUS  NO
RACD NO
FRL  0 0
FRL  1 0
FRL  2 0
FRL  3 0
FRL  4 0
FRL  5 0
FRL  6 0
FRL  7 0
OHQ  NO
OHQT 00
CBQ  NO
AUTH NO
TDET NO
TTBL 0
ATAN NO
PLEV 2
ALRM NO
ART  0
SGRP 0
AACR NO

DES  VERSA
TN   101 01
TYPE TIE
CDEN SD
CUST 0
TRK  PRI
PDCA 1
PCML MU
NCOS 0
RTMB 1 73
B-CHANNEL SIGNALING
TGAR 1
AST  NO
IAPG 0
CLS  UNR DTN WTA LPR APN THFD HKD
     P10 VNL
TKID
DATE  5 DEC 2005



Anish Basu
Field Systems Engineer
Softel, Inc.
Phone: (732) 705-9202
Cell: (732) 312-6634

Anthony Rodgers

2005-Dec-07 09:40 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

This might be an obvious question, but should you be using a crossover 
cable?

Information on setting up Nortel to TDM card links can be found at: 
<http://www.pham.org/asterisk/asterisk-meridian-a1.pdf>

Regards,
-- 
Anthony Rodgers
Business Systems Analyst
District of North Vancouver
Web: http://www.dnv.org
RSS Feed: http://www.dnv.org/rss.asp


On Dec 6, 2005, at 2:59 PM, Anish Basu wrote:
> Hi,
>
> I am having problems connecting a Nortel Meridian Option 81C PBX to my
> Asterisk 1.20 server.? We are using the TE405P card with one crossover 
> PRI
> T1 cable connecting the two systems.? The lights on the back of the 
> TE405P
> are green and zttool shows that the span is okay.? Calls cannot be 
> made and
> 'pri show span 1' shows the d-channel as down.? If anyone has any 
> experience
> with this, suggestions and tips are greatly appreciatd.? If we cannot 
> get
> this resolved within the next few days, we are willing to pay 
> consulting
> fees for help.? The config files are as listed below.? Thanks for any 
> help
> in advance.
>
>
> zaptel.conf
> -----------
> loadzone = us
> defaultzone=us
> span=1,0,0,esf,b8zs
> bchan=1-23
> dchan=24
>
> zapata.conf
> -----------
> [trunkgroups]
>
> [channels]
> language=en
> switchtype=5ess
> context=from-pbx
> signalling=pri_net
> group=1
> callgroup=1
> pickupgroup=1
> channel => 1-23
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> faxdetect=both
> musiconhold=default
>
> Nortel configuration: b-channel,d-channel, and route data block
> ---------------------------------------------------------------
> REQ? prt
> TYPE adan dch 10
>
> ADAN???? DCH 10
> ? CTYP MSDL
> ? GRP? 3
> ? DNUM 2
> ? PORT 0
> ? DES? VresaBridge
> ? USR? PRI
> ? DCHL 101
> ? OTBF 32
> ? PARM RS422? DTE
> ? DRAT 64KC
> ? CLOK EXT
> ? IFC? ESS5
> ? SIDE USR
> ? CNEG 1
> ? RLS? ID? 1
> ? RCAP ND2
> ? MBGA NO
> ? OVLR NO
> ? OVLS NO
> ? T200 3
> ? T203 10
> ? N200 3
> ? N201 260
> ? K??? 7
>
>
> ROUT 1
>
> TYPE RDB
> CUST 00
> ROUT 1
> DES? VERSA
> TKTP TIE
> NPID_TBL_NUM?? 0
> ESN? NO
> CNVT NO
> SAT? NO
> RCLS EXT
> VTRK NO
> DTRK YES
> BRIP NO
> DGTP PRI
> ISDN YES
> ??? MODE PRA
> ??? IFC? ESS5
> ??? SBN? NO
> ??? PNI? 00001
> ??? SRVC NNSF
> ??? NCNA YES
> ??? NCRD YES
> ??? CHTY BCH
> ??? CTYP UKWN
> ??? INAC YES
> ??? ISAR NO
> ??? CPUB OFF
> ??? DAPC NO
> ??? BCOT 0
> DSEL VOD
> PTYP PRI
> AUTO NO
> DNIS NO
> DCDR NO
> ICOG IAO
> SRCH LIN
> TRMB YES
> STEP
> ACOD 8901
> TCPP NO
> PII NO
> TARG 01
> CLEN 1
> BILN NO
> OABS
> INST
> IDC? NO
> DCNO 0 *
> NDNO 0
> DEXT NO
> ANTK
> SIGO STD
> ICIS YES
> TIMR ICF? 512
> ???? OGF? 512
> ???? EOD? 13952
> ???? NRD? 10112
> ???? DDL? 70
> ???? ODT? 4096
> ???? RGV? 640
> ???? GRD? 896
> ???? SFB? 3
> ???? NBS? 2048
>
>
> PAGE 002
>
> ???? NBL? 4096
>
> ???? IENB? 5
> ???? TFD? 0
> ???? VSS? 0
> ???? VGD? 6
> DRNG NO
> CDR? NO
> VRAT NO
> MUS? NO
> RACD NO
> FRL? 0 0
> FRL? 1 0
> FRL? 2 0
> FRL? 3 0
> FRL? 4 0
> FRL? 5 0
> FRL? 6 0
> FRL? 7 0
> OHQ? NO
> OHQT 00
> CBQ? NO
> AUTH NO
> TDET NO
> TTBL 0
> ATAN NO
> PLEV 2
> ALRM NO
> ART? 0
> SGRP 0
> AACR NO
>
> DES? VERSA
> TN?? 101 01
> TYPE TIE
> CDEN SD
> CUST 0
> TRK? PRI
> PDCA 1
> PCML MU
> NCOS 0
> RTMB 1 73
> B-CHANNEL SIGNALING
> TGAR 1
> AST? NO
> IAPG 0
> CLS? UNR DTN WTA LPR APN THFD HKD
> ???? P10 VNL
> TKID
> DATE? 5 DEC 2005
>
>
>
> Anish Basu
> Field Systems Engineer
> Softel, Inc.
> Phone: (732) 705-9202
> Cell: (732) 312-6634
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> ?? http://lists.digium.com/mailman/listinfo/asterisk-users

Schochet, Wes

2005-Dec-07 10:08 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

Can you do a ISDN message trace in LD 96 on the M1 when you try to bring up
the D-Channel?  

LD 96
enl msgo 10
enl msgi 10

Make sure you later do a 
dis msgi 10
dis msgo 10

To shut it off.


You should see good info there.


-----Original Message-----
From: Anthony Rodgers [mailto:Anthony_Rodgers@dnv.org] 
Sent: Wednesday, December 07, 2005 10:41 AM
To: <anish@softelinc.com>
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P

This might be an obvious question, but should you be using a crossover
cable?

Information on setting up Nortel to TDM card links can be found at: 
<http://www.pham.org/asterisk/asterisk-meridian-a1.pdf>

Regards,
--
Anthony Rodgers
Business Systems Analyst
District of North Vancouver
Web: http://www.dnv.org
RSS Feed: http://www.dnv.org/rss.asp


On Dec 6, 2005, at 2:59 PM, Anish Basu wrote:
> Hi,
>
> I am having problems connecting a Nortel Meridian Option 81C PBX to my
> Asterisk 1.20 server.? We are using the TE405P card with one crossover 
> PRI
> T1 cable connecting the two systems.? The lights on the back of the 
> TE405P
> are green and zttool shows that the span is okay.? Calls cannot be 
> made and
> 'pri show span 1' shows the d-channel as down.? If anyone has any 
> experience
> with this, suggestions and tips are greatly appreciatd.? If we cannot 
> get
> this resolved within the next few days, we are willing to pay 
> consulting
> fees for help.? The config files are as listed below.? Thanks for any 
> help
> in advance.
>
>
> zaptel.conf
> -----------
> loadzone = us
> defaultzone=us
> span=1,0,0,esf,b8zs
> bchan=1-23
> dchan=24
>
> zapata.conf
> -----------
> [trunkgroups]
>
> [channels]
> language=en
> switchtype=5ess
> context=from-pbx
> signalling=pri_net
> group=1
> callgroup=1
> pickupgroup=1
> channel => 1-23
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> faxdetect=both
> musiconhold=default
>
> Nortel configuration: b-channel,d-channel, and route data block
> ---------------------------------------------------------------
> REQ? prt
> TYPE adan dch 10
>
> ADAN???? DCH 10
> ? CTYP MSDL
> ? GRP? 3
> ? DNUM 2
> ? PORT 0
> ? DES? VresaBridge
> ? USR? PRI
> ? DCHL 101
> ? OTBF 32
> ? PARM RS422? DTE
> ? DRAT 64KC
> ? CLOK EXT
> ? IFC? ESS5
> ? SIDE USR
> ? CNEG 1
> ? RLS? ID? 1
> ? RCAP ND2
> ? MBGA NO
> ? OVLR NO
> ? OVLS NO
> ? T200 3
> ? T203 10
> ? N200 3
> ? N201 260
> ? K??? 7
>
>
> ROUT 1
>
> TYPE RDB
> CUST 00
> ROUT 1
> DES? VERSA
> TKTP TIE
> NPID_TBL_NUM?? 0
> ESN? NO
> CNVT NO
> SAT? NO
> RCLS EXT
> VTRK NO
> DTRK YES
> BRIP NO
> DGTP PRI
> ISDN YES
> ??? MODE PRA
> ??? IFC? ESS5
> ??? SBN? NO
> ??? PNI? 00001
> ??? SRVC NNSF
> ??? NCNA YES
> ??? NCRD YES
> ??? CHTY BCH
> ??? CTYP UKWN
> ??? INAC YES
> ??? ISAR NO
> ??? CPUB OFF
> ??? DAPC NO
> ??? BCOT 0
> DSEL VOD
> PTYP PRI
> AUTO NO
> DNIS NO
> DCDR NO
> ICOG IAO
> SRCH LIN
> TRMB YES
> STEP
> ACOD 8901
> TCPP NO
> PII NO
> TARG 01
> CLEN 1
> BILN NO
> OABS
> INST
> IDC? NO
> DCNO 0 *
> NDNO 0
> DEXT NO
> ANTK
> SIGO STD
> ICIS YES
> TIMR ICF? 512
> ???? OGF? 512
> ???? EOD? 13952
> ???? NRD? 10112
> ???? DDL? 70
> ???? ODT? 4096
> ???? RGV? 640
> ???? GRD? 896
> ???? SFB? 3
> ???? NBS? 2048
>
>
> PAGE 002
>
> ???? NBL? 4096
>
> ???? IENB? 5
> ???? TFD? 0
> ???? VSS? 0
> ???? VGD? 6
> DRNG NO
> CDR? NO
> VRAT NO
> MUS? NO
> RACD NO
> FRL? 0 0
> FRL? 1 0
> FRL? 2 0
> FRL? 3 0
> FRL? 4 0
> FRL? 5 0
> FRL? 6 0
> FRL? 7 0
> OHQ? NO
> OHQT 00
> CBQ? NO
> AUTH NO
> TDET NO
> TTBL 0
> ATAN NO
> PLEV 2
> ALRM NO
> ART? 0
> SGRP 0
> AACR NO
>
> DES? VERSA
> TN?? 101 01
> TYPE TIE
> CDEN SD
> CUST 0
> TRK? PRI
> PDCA 1
> PCML MU
> NCOS 0
> RTMB 1 73
> B-CHANNEL SIGNALING
> TGAR 1
> AST? NO
> IAPG 0
> CLS? UNR DTN WTA LPR APN THFD HKD
> ???? P10 VNL
> TKID
> DATE? 5 DEC 2005
>
>
>
> Anish Basu
> Field Systems Engineer
> Softel, Inc.
> Phone: (732) 705-9202
> Cell: (732) 312-6634
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> ?? http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Steve Totaro

2005-Dec-08 08:02 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

He said that he is using a crossover but for some reason I think the
crossover may be the problem.  Try making a new one.  Cross pin one with
four and two with five.  Also try a straight through cable.  Your
configs look fine on the asterisk side although I am not real cluefull
on the Meridian.  

One question, was the Meridian ever hooked up to the PSTN?

Thanks,
Steve
> 
> This might be an obvious question, but should you be using a crossover
> cable?
> 
> Information on setting up Nortel to TDM card links can be found at:
> <http://www.pham.org/asterisk/asterisk-meridian-a1.pdf>
> 
> Regards,
> --
> Anthony Rodgers
> Business Systems Analyst
> District of North Vancouver
> Web: http://www.dnv.org
> RSS Feed: http://www.dnv.org/rss.asp
> 
> 
> On Dec 6, 2005, at 2:59 PM, Anish Basu wrote:
> 
> > Hi,
> >
> > I am having problems connecting a Nortel Meridian Option 81C PBX to
my> > Asterisk 1.20 server.? We are using the TE405P card with one
crossover> > PRI
> > T1 cable connecting the two systems.? The lights on the back of the
> > TE405P
> > are green and zttool shows that the span is okay.? Calls cannot be
> > made and
> > 'pri show span 1' shows the d-channel as down.? If anyone has
any
> > experience
> > with this, suggestions and tips are greatly appreciatd.? If we
cannot> > get
> > this resolved within the next few days, we are willing to pay
> > consulting
> > fees for help.? The config files are as listed below.? Thanks for
any> > help
> > in advance.
> >
> >
> > zaptel.conf
> > -----------
> > loadzone = us
> > defaultzone=us
> > span=1,0,0,esf,b8zs
> > bchan=1-23
> > dchan=24
> >
> > zapata.conf
> > -----------
> > [trunkgroups]
> >
> > [channels]
> > language=en
> > switchtype=5ess
> > context=from-pbx
> > signalling=pri_net
> > group=1
> > callgroup=1
> > pickupgroup=1
> > channel => 1-23
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > canpark=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=0.0
> > txgain=0.0
> > faxdetect=both
> > musiconhold=default
> >
> > Nortel configuration: b-channel,d-channel, and route data block
> > ---------------------------------------------------------------
> > REQ? prt
> > TYPE adan dch 10
> >
> > ADAN???? DCH 10
> > ? CTYP MSDL
> > ? GRP? 3
> > ? DNUM 2
> > ? PORT 0
> > ? DES? VresaBridge
> > ? USR? PRI
> > ? DCHL 101
> > ? OTBF 32
> > ? PARM RS422? DTE
> > ? DRAT 64KC
> > ? CLOK EXT
> > ? IFC? ESS5
> > ? SIDE USR
> > ? CNEG 1
> > ? RLS? ID? 1
> > ? RCAP ND2
> > ? MBGA NO
> > ? OVLR NO
> > ? OVLS NO
> > ? T200 3
> > ? T203 10
> > ? N200 3
> > ? N201 260
> > ? K??? 7
> >
> >
> > ROUT 1
> >
> > TYPE RDB
> > CUST 00
> > ROUT 1
> > DES? VERSA
> > TKTP TIE
> > NPID_TBL_NUM?? 0
> > ESN? NO
> > CNVT NO
> > SAT? NO
> > RCLS EXT
> > VTRK NO
> > DTRK YES
> > BRIP NO
> > DGTP PRI
> > ISDN YES
> > ??? MODE PRA
> > ??? IFC? ESS5
> > ??? SBN? NO
> > ??? PNI? 00001
> > ??? SRVC NNSF
> > ??? NCNA YES
> > ??? NCRD YES
> > ??? CHTY BCH
> > ??? CTYP UKWN
> > ??? INAC YES
> > ??? ISAR NO
> > ??? CPUB OFF
> > ??? DAPC NO
> > ??? BCOT 0
> > DSEL VOD
> > PTYP PRI
> > AUTO NO
> > DNIS NO
> > DCDR NO
> > ICOG IAO
> > SRCH LIN
> > TRMB YES
> > STEP
> > ACOD 8901
> > TCPP NO
> > PII NO
> > TARG 01
> > CLEN 1
> > BILN NO
> > OABS
> > INST
> > IDC? NO
> > DCNO 0 *
> > NDNO 0
> > DEXT NO
> > ANTK
> > SIGO STD
> > ICIS YES
> > TIMR ICF? 512
> > ???? OGF? 512
> > ???? EOD? 13952
> > ???? NRD? 10112
> > ???? DDL? 70
> > ???? ODT? 4096
> > ???? RGV? 640
> > ???? GRD? 896
> > ???? SFB? 3
> > ???? NBS? 2048
> >
> >
> > PAGE 002
> >
> > ???? NBL? 4096
> >
> > ???? IENB? 5
> > ???? TFD? 0
> > ???? VSS? 0
> > ???? VGD? 6
> > DRNG NO
> > CDR? NO
> > VRAT NO
> > MUS? NO
> > RACD NO
> > FRL? 0 0
> > FRL? 1 0
> > FRL? 2 0
> > FRL? 3 0
> > FRL? 4 0
> > FRL? 5 0
> > FRL? 6 0
> > FRL? 7 0
> > OHQ? NO
> > OHQT 00
> > CBQ? NO
> > AUTH NO
> > TDET NO
> > TTBL 0
> > ATAN NO
> > PLEV 2
> > ALRM NO
> > ART? 0
> > SGRP 0
> > AACR NO
> >
> > DES? VERSA
> > TN?? 101 01
> > TYPE TIE
> > CDEN SD
> > CUST 0
> > TRK? PRI
> > PDCA 1
> > PCML MU
> > NCOS 0
> > RTMB 1 73
> > B-CHANNEL SIGNALING
> > TGAR 1
> > AST? NO
> > IAPG 0
> > CLS? UNR DTN WTA LPR APN THFD HKD
> > ???? P10 VNL
> > TKID
> > DATE? 5 DEC 2005
> >
> >
> >
> > Anish Basu
> > Field Systems Engineer
> > Softel, Inc.
> > Phone: (732) 705-9202
> > Cell: (732) 312-6634
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > ?? http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Steve Totaro

2005-Dec-08 08:25 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

Cabling is always the first thing to check in these types of issues.
Sure, he may need a T1 crossover but maybe the cable was made
incorrectly or the connections are not crimped well.  Just because
someone says they have a crossover cable does not mean that it is OK.
Again, check the cable (physical layer one)

Thanks,
Steve
> 
> If the digium card is good then he has the proper cable config,
> although his send may not be getting to the nortel. This is layer one
> which must work before layer two, ie d channel.
> 
> What does the nortel say regarding the T1?
> 
> If this is good then your issue is with configuration not cableing.
> 
> 
> On Dec 8, 2005, at 9:02 AM, Steve Totaro wrote:
> 
> >
> > He said that he is using a crossover but for some reason I think the
> > crossover may be the problem.  Try making a new one.  Cross pin one
> > with
> > four and two with five.  Also try a straight through cable.  Your
> > configs look fine on the asterisk side although I am not real
cluefull> > on the Meridian.
> >
> > One question, was the Meridian ever hooked up to the PSTN?
> >
> > Thanks,
> > Steve
> >
> >>
> >> This might be an obvious question, but should you be using a
> >> crossover
> >> cable?
> >>
> >> Information on setting up Nortel to TDM card links can be found
at:
> >> <http://www.pham.org/asterisk/asterisk-meridian-a1.pdf>
> >>
> >> Regards,
> >> --
> >> Anthony Rodgers
> >> Business Systems Analyst
> >> District of North Vancouver
> >> Web: http://www.dnv.org
> >> RSS Feed: http://www.dnv.org/rss.asp
> >>
> >>
> >> On Dec 6, 2005, at 2:59 PM, Anish Basu wrote:
> >>
> >>> Hi,
> >>>
> >>> I am having problems connecting a Nortel Meridian Option 81C
PBX
to> > my
> >>> Asterisk 1.20 server.  We are using the TE405P card with one
> > crossover
> >>> PRI
> >>> T1 cable connecting the two systems.  The lights on the back
of
the> >>> TE405P
> >>> are green and zttool shows that the span is okay.  Calls
cannot be
> >>> made and
> >>> 'pri show span 1' shows the d-channel as down.  If
anyone has any
> >>> experience
> >>> with this, suggestions and tips are greatly appreciatd.  If we
> > cannot
> >>> get
> >>> this resolved within the next few days, we are willing to pay
> >>> consulting
> >>> fees for help.  The config files are as listed below.  Thanks
for
> > any
> >>> help
> >>> in advance.
> >>>
> >>>
> >>> zaptel.conf
> >>> -----------
> >>> loadzone = us
> >>> defaultzone=us
> >>> span=1,0,0,esf,b8zs
> >>> bchan=1-23
> >>> dchan=24
> >>>
> >>> zapata.conf
> >>> -----------
> >>> [trunkgroups]
> >>>
> >>> [channels]
> >>> language=en
> >>> switchtype=5ess
> >>> context=from-pbx
> >>> signalling=pri_net
> >>> group=1
> >>> callgroup=1
> >>> pickupgroup=1
> >>> channel => 1-23
> >>> usecallerid=yes
> >>> hidecallerid=no
> >>> callwaiting=yes
> >>> callwaitingcallerid=yes
> >>> threewaycalling=yes
> >>> transfer=yes
> >>> canpark=yes
> >>> cancallforward=yes
> >>> callreturn=yes
> >>> echocancel=yes
> >>> echocancelwhenbridged=yes
> >>> rxgain=0.0
> >>> txgain=0.0
> >>> faxdetect=both
> >>> musiconhold=default
> >>>
> >>> Nortel configuration: b-channel,d-channel, and route data
block
> >>>
---------------------------------------------------------------
> >>> REQ  prt
> >>> TYPE adan dch 10
> >>>
> >>> ADAN     DCH 10
> >>>   CTYP MSDL
> >>>   GRP  3
> >>>   DNUM 2
> >>>   PORT 0
> >>>   DES  VresaBridge
> >>>   USR  PRI
> >>>   DCHL 101
> >>>   OTBF 32
> >>>   PARM RS422  DTE
> >>>   DRAT 64KC
> >>>   CLOK EXT
> >>>   IFC  ESS5
> >>>   SIDE USR
> >>>   CNEG 1
> >>>   RLS  ID  1
> >>>   RCAP ND2
> >>>   MBGA NO
> >>>   OVLR NO
> >>>   OVLS NO
> >>>   T200 3
> >>>   T203 10
> >>>   N200 3
> >>>   N201 260
> >>>   K    7
> >>>
> >>>
> >>> ROUT 1
> >>>
> >>> TYPE RDB
> >>> CUST 00
> >>> ROUT 1
> >>> DES  VERSA
> >>> TKTP TIE
> >>> NPID_TBL_NUM   0
> >>> ESN  NO
> >>> CNVT NO
> >>> SAT  NO
> >>> RCLS EXT
> >>> VTRK NO
> >>> DTRK YES
> >>> BRIP NO
> >>> DGTP PRI
> >>> ISDN YES
> >>>     MODE PRA
> >>>     IFC  ESS5
> >>>     SBN  NO
> >>>     PNI  00001
> >>>     SRVC NNSF
> >>>     NCNA YES
> >>>     NCRD YES
> >>>     CHTY BCH
> >>>     CTYP UKWN
> >>>     INAC YES
> >>>     ISAR NO
> >>>     CPUB OFF
> >>>     DAPC NO
> >>>     BCOT 0
> >>> DSEL VOD
> >>> PTYP PRI
> >>> AUTO NO
> >>> DNIS NO
> >>> DCDR NO
> >>> ICOG IAO
> >>> SRCH LIN
> >>> TRMB YES
> >>> STEP
> >>> ACOD 8901
> >>> TCPP NO
> >>> PII NO
> >>> TARG 01
> >>> CLEN 1
> >>> BILN NO
> >>> OABS
> >>> INST
> >>> IDC  NO
> >>> DCNO 0 *
> >>> NDNO 0
> >>> DEXT NO
> >>> ANTK
> >>> SIGO STD
> >>> ICIS YES
> >>> TIMR ICF  512
> >>>      OGF  512
> >>>      EOD  13952
> >>>      NRD  10112
> >>>      DDL  70
> >>>      ODT  4096
> >>>      RGV  640
> >>>      GRD  896
> >>>      SFB  3
> >>>      NBS  2048
> >>>
> >>>
> >>> PAGE 002
> >>>
> >>>      NBL  4096
> >>>
> >>>      IENB  5
> >>>      TFD  0
> >>>      VSS  0
> >>>      VGD  6
> >>> DRNG NO
> >>> CDR  NO
> >>> VRAT NO
> >>> MUS  NO
> >>> RACD NO
> >>> FRL  0 0
> >>> FRL  1 0
> >>> FRL  2 0
> >>> FRL  3 0
> >>> FRL  4 0
> >>> FRL  5 0
> >>> FRL  6 0
> >>> FRL  7 0
> >>> OHQ  NO
> >>> OHQT 00
> >>> CBQ  NO
> >>> AUTH NO
> >>> TDET NO
> >>> TTBL 0
> >>> ATAN NO
> >>> PLEV 2
> >>> ALRM NO
> >>> ART  0
> >>> SGRP 0
> >>> AACR NO
> >>>
> >>> DES  VERSA
> >>> TN   101 01
> >>> TYPE TIE
> >>> CDEN SD
> >>> CUST 0
> >>> TRK  PRI
> >>> PDCA 1
> >>> PCML MU
> >>> NCOS 0
> >>> RTMB 1 73
> >>> B-CHANNEL SIGNALING
> >>> TGAR 1
> >>> AST  NO
> >>> IAPG 0
> >>> CLS  UNR DTN WTA LPR APN THFD HKD
> >>>      P10 VNL
> >>> TKID
> >>> DATE  5 DEC 2005
> >>>
> >>>
> >>>
> >>> Anish Basu
> >>> Field Systems Engineer
> >>> Softel, Inc.
> >>> Phone: (732) 705-9202
> >>> Cell: (732) 312-6634
> >>>
> >>> _______________________________________________
> >>> --Bandwidth and Colocation provided by Easynews.com --
> >>>
> >>> Asterisk-Users mailing list
> >>> To UNSUBSCRIBE or update options visit:
> >>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> Asterisk-Users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Steve Totaro

2005-Dec-08 08:36 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

Yes, that is why I said cross pins one with four and two with five (a T1
crossover cable configuration)

> You can't use a ethernet crossover cable, make sure you are using a T1
> crossover cable.  (you will definately need to use a T1 crossover
cable).> 
> I'm running a Nortel Option 11 and Asterisk connected in this manner.
> 
> 
> On 12/8/05, Steve Totaro <stotaro@totarotechnologies.com> wrote:
> 
> 
> 	He said that he is using a crossover but for some reason I think
the> 	crossover may be the problem.  Try making a new one.  Cross pin
one> with
> 	four and two with five.  Also try a straight through cable.
Your> 	configs look fine on the asterisk side although I am not real
> cluefull
> 	on the Meridian.
> 
> 	One question, was the Meridian ever hooked up to the PSTN?
> 
> 	Thanks,
> 	Steve
> 
> 	>
> 	> This might be an obvious question, but should you be using a
> crossover
> 	> cable?
> 	>
> 	> Information on setting up Nortel to TDM card links can be
found> at:
> 	> < http://www.pham.org/asterisk/asterisk-meridian-a1.pdf>
> 	>
> 	> Regards,
> 	> --
> 	> Anthony Rodgers
> 	> Business Systems Analyst
> 	> District of North Vancouver
> 	> Web: http://www.dnv.org
> 	> RSS Feed: http://www.dnv.org/rss.asp
> 	>
> 	>
> 	> On Dec 6, 2005, at 2:59 PM, Anish Basu wrote:
> 	>
> 	> > Hi,
> 	> >
> 	> > I am having problems connecting a Nortel Meridian Option 81C
PBX> to
> 	my
> 	> > Asterisk 1.20 server. We are using the TE405P card with one
> 	crossover
> 	> > PRI
> 	> > T1 cable connecting the two systems. The lights on the back
of> the
> 	> > TE405P
> 	> > are green and zttool shows that the span is okay. Calls
cannot> be
> 	> > made and
> 	> > 'pri show span 1' shows the d-channel as down. If anyone
has
any> 	> > experience
> 	> > with this, suggestions and tips are greatly appreciatd. If
we> 	cannot
> 	> > get
> 	> > this resolved within the next few days, we are willing to
pay> 	> > consulting
> 	> > fees for help. The config files are as listed below. Thanks
for> 	any
> 	> > help
> 	> > in advance.
> 	> >
> 	> >
> 	> > zaptel.conf
> 	> > -----------
> 	> > loadzone = us
> 	> > defaultzone=us
> 	> > span=1,0,0,esf,b8zs
> 	> > bchan=1-23
> 	> > dchan=24
> 	> >
> 	> > zapata.conf
> 	> > -----------
> 	> > [trunkgroups]
> 	> >
> 	> > [channels]
> 	> > language=en
> 	> > switchtype=5ess
> 	> > context=from-pbx
> 	> > signalling=pri_net
> 	> > group=1
> 	> > callgroup=1
> 	> > pickupgroup=1
> 	> > channel => 1-23
> 	> > usecallerid=yes
> 	> > hidecallerid=no
> 	> > callwaiting=yes
> 	> > callwaitingcallerid=yes
> 	> > threewaycalling=yes
> 	> > transfer=yes
> 	> > canpark=yes
> 	> > cancallforward=yes
> 	> > callreturn=yes
> 	> > echocancel=yes
> 	> > echocancelwhenbridged=yes
> 	> > rxgain=0.0
> 	> > txgain=0.0
> 	> > faxdetect=both
> 	> > musiconhold=default
> 	> >
> 	> > Nortel configuration: b-channel,d-channel, and route data
block> 	> >
---------------------------------------------------------------> 	> > REQ prt
> 	> > TYPE adan dch 10
> 	> >
> 	> > ADAN DCH 10
> 	> > CTYP MSDL
> 	> > GRP 3
> 	> > DNUM 2
> 	> > PORT 0
> 	> > DES VresaBridge
> 	> > USR PRI
> 	> > DCHL 101
> 	> > OTBF 32
> 	> > PARM RS422 DTE
> 	> > DRAT 64KC
> 	> > CLOK EXT
> 	> > IFC ESS5
> 	> > SIDE USR
> 	> > CNEG 1
> 	> > RLS ID 1
> 	> > RCAP ND2
> 	> > MBGA NO
> 	> > OVLR NO
> 	> > OVLS NO
> 	> > T200 3
> 	> > T203 10
> 	> > N200 3
> 	> > N201 260
> 	> > K 7
> 	> >
> 	> >
> 	> > ROUT 1
> 	> >
> 	> > TYPE RDB
> 	> > CUST 00
> 	> > ROUT 1
> 	> > DES VERSA
> 	> > TKTP TIE
> 	> > NPID_TBL_NUM 0
> 	> > ESN NO
> 	> > CNVT NO
> 	> > SAT NO
> 	> > RCLS EXT
> 	> > VTRK NO
> 	> > DTRK YES
> 	> > BRIP NO
> 	> > DGTP PRI
> 	> > ISDN YES
> 	> > MODE PRA
> 	> > IFC ESS5
> 	> > SBN NO
> 	> > PNI 00001
> 	> > SRVC NNSF
> 	> > NCNA YES
> 	> > NCRD YES
> 	> > CHTY BCH
> 	> > CTYP UKWN
> 	> > INAC YES
> 	> > ISAR NO
> 	> > CPUB OFF
> 	> > DAPC NO
> 	> > BCOT 0
> 	> > DSEL VOD
> 	> > PTYP PRI
> 	> > AUTO NO
> 	> > DNIS NO
> 	> > DCDR NO
> 	> > ICOG IAO
> 	> > SRCH LIN
> 	> > TRMB YES
> 	> > STEP
> 	> > ACOD 8901
> 	> > TCPP NO
> 	> > PII NO
> 	> > TARG 01
> 	> > CLEN 1
> 	> > BILN NO
> 	> > OABS
> 	> > INST
> 	> > IDC NO
> 	> > DCNO 0 *
> 	> > NDNO 0
> 	> > DEXT NO
> 	> > ANTK
> 	> > SIGO STD
> 	> > ICIS YES
> 	> > TIMR ICF 512
> 	> > OGF 512
> 	> > EOD 13952
> 	> > NRD 10112
> 	> > DDL 70
> 	> > ODT 4096
> 	> > RGV 640
> 	> > GRD 896
> 	> > SFB 3
> 	> > NBS 2048
> 	> >
> 	> >
> 	> > PAGE 002
> 	> >
> 	> > NBL 4096
> 	> >
> 	> > IENB 5
> 	> > TFD 0
> 	> > VSS 0
> 	> > VGD 6
> 	> > DRNG NO
> 	> > CDR NO
> 	> > VRAT NO
> 	> > MUS NO
> 	> > RACD NO
> 	> > FRL 0 0
> 	> > FRL 1 0
> 	> > FRL 2 0
> 	> > FRL 3 0
> 	> > FRL 4 0
> 	> > FRL 5 0
> 	> > FRL 6 0
> 	> > FRL 7 0
> 	> > OHQ NO
> 	> > OHQT 00
> 	> > CBQ NO
> 	> > AUTH NO
> 	> > TDET NO
> 	> > TTBL 0
> 	> > ATAN NO
> 	> > PLEV 2
> 	> > ALRM NO
> 	> > ART 0
> 	> > SGRP 0
> 	> > AACR NO
> 	> >
> 	> > DES VERSA
> 	> > TN 101 01
> 	> > TYPE TIE
> 	> > CDEN SD
> 	> > CUST 0
> 	> > TRK PRI
> 	> > PDCA 1
> 	> > PCML MU
> 	> > NCOS 0
> 	> > RTMB 1 73
> 	> > B-CHANNEL SIGNALING
> 	> > TGAR 1
> 	> > AST NO
> 	> > IAPG 0
> 	> > CLS UNR DTN WTA LPR APN THFD HKD
> 	> > P10 VNL
> 	> > TKID
> 	> > DATE 5 DEC 2005
> 	> >
> 	> >
> 	> >
> 	> > Anish Basu
> 	> > Field Systems Engineer
> 	> > Softel, Inc.
> 	> > Phone: (732) 705-9202
> 	> > Cell: (732) 312-6634
> 	> >
> 	> > _______________________________________________
> 	> > --Bandwidth and Colocation provided by Easynews.com --
> 	> >
> 	> > Asterisk-Users mailing list
> 	> > To UNSUBSCRIBE or update options visit:
> 	> > http://lists.digium.com/mailman/listinfo/asterisk-users
> <http://lists.digium.com/mailman/listinfo/asterisk-users>
> 	>
> 	> _______________________________________________
> 	> --Bandwidth and Colocation provided by Easynews.com --
> 	>
> 	> Asterisk-Users mailing list
> 	> To UNSUBSCRIBE or update options visit:
> 	>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 	_______________________________________________
> 	--Bandwidth and Colocation provided by Easynews.com --
> 
> 	Asterisk-Users mailing list
> 	To UNSUBSCRIBE or update options visit:
> 	  http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>

Anish Basu

2005-Dec-08 09:36 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

We finally got the T1 connection working between the Nortel and the Asterisk
box, but only with Robbed bit signalling.  For some reason, the D channels
would not come up when using PRI ISDN.  No clue why, but I'm just happy to
have it up and running.

Anish Basu
Field Systems Engineer
Softel, Inc.
Phone: (732) 705-9202
Cell: (732) 312-6634

Schochet, Wes

2005-Dec-08 15:51 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

Joe, are you running PRI to your Opt 11?  I have a 61 and I can;t get my
d-channel to come up to save my life!

  _____  

From: Joe Pukepail [mailto:pukepail@gmail.com] 
Sent: Thursday, December 08, 2005 9:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P


You can't use a ethernet crossover cable, make sure you are using a T1
crossover cable.  (you will definately need to use a T1 crossover cable). 
 
I'm running a Nortel Option 11 and Asterisk connected in this manner. 

 
On 12/8/05, Steve Totaro <stotaro@totarotechnologies.com
<mailto:stotaro@totarotechnologies.com> > wrote: 


He said that he is using a crossover but for some reason I think the
crossover may be the problem.  Try making a new one.  Cross pin one with 
four and two with five.  Also try a straight through cable.  Your
configs look fine on the asterisk side although I am not real cluefull
on the Meridian.

One question, was the Meridian ever hooked up to the PSTN? 

Thanks,
Steve
>
> This might be an obvious question, but should you be using a crossover
> cable?
>
> Information on setting up Nortel to TDM card links can be found at:
> < http://www.pham.org/asterisk/asterisk-meridian-a1.pdf<http://www.pham.org/asterisk/asterisk-meridian-a1.pdf>
>>
> Regards,
> --
> Anthony Rodgers
> Business Systems Analyst
> District of North Vancouver
> Web: http://www.dnv.org <http://www.dnv.org> 
> RSS Feed: http://www.dnv.org/rss.asp <http://www.dnv.org/rss.asp> 
>
>
> On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: 
>
> > Hi,
> >
> > I am having problems connecting a Nortel Meridian Option 81C PBX to
my> > Asterisk 1.20 server. We are using the TE405P card with one
crossover> > PRI 
> > T1 cable connecting the two systems. The lights on the back of the
> > TE405P
> > are green and zttool shows that the span is okay. Calls cannot be
> > made and
> > 'pri show span 1' shows the d-channel as down. If anyone has
any
> > experience
> > with this, suggestions and tips are greatly appreciatd. If we
cannot> > get
> > this resolved within the next few days, we are willing to pay
> > consulting 
> > fees for help. The config files are as listed below. Thanks for
any> > help
> > in advance.
> >
> >
> > zaptel.conf
> > -----------
> > loadzone = us 
> > defaultzone=us
> > span=1,0,0,esf,b8zs
> > bchan=1-23
> > dchan=24
> >
> > zapata.conf
> > -----------
> > [trunkgroups]
> >
> > [channels] 
> > language=en
> > switchtype=5ess
> > context=from-pbx
> > signalling=pri_net
> > group=1
> > callgroup=1
> > pickupgroup=1
> > channel => 1-23 
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > canpark=yes
> > cancallforward=yes 
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=0.0
> > txgain=0.0
> > faxdetect=both
> > musiconhold=default
> >
> > Nortel configuration: b-channel,d-channel, and route data block
> > ---------------------------------------------------------------
> > REQ prt
> > TYPE adan dch 10
> >
> > ADAN DCH 10 
> > CTYP MSDL
> > GRP 3
> > DNUM 2
> > PORT 0
> > DES VresaBridge
> > USR PRI
> > DCHL 101
> > OTBF 32
> > PARM RS422 DTE
> > DRAT 64KC 
> > CLOK EXT
> > IFC ESS5
> > SIDE USR
> > CNEG 1
> > RLS ID 1
> > RCAP ND2
> > MBGA NO
> > OVLR NO
> > OVLS NO
> > T200 3
> > T203 10 
> > N200 3
> > N201 260
> > K 7
> >
> >
> > ROUT 1
> >
> > TYPE RDB
> > CUST 00
> > ROUT 1
> > DES VERSA
> > TKTP TIE 
> > NPID_TBL_NUM 0
> > ESN NO
> > CNVT NO
> > SAT NO
> > RCLS EXT
> > VTRK NO
> > DTRK YES
> > BRIP NO
> > DGTP PRI
> > ISDN YES
> > MODE PRA
> > IFC ESS5
> > SBN NO
> > PNI 00001
> > SRVC NNSF
> > NCNA YES
> > NCRD YES
> > CHTY BCH
> > CTYP UKWN
> > INAC YES
> > ISAR NO
> > CPUB OFF
> > DAPC NO
> > BCOT 0
> > DSEL VOD
> > PTYP PRI
> > AUTO NO
> > DNIS NO
> > DCDR NO
> > ICOG IAO
> > SRCH LIN 
> > TRMB YES
> > STEP
> > ACOD 8901
> > TCPP NO
> > PII NO
> > TARG 01
> > CLEN 1
> > BILN NO
> > OABS
> > INST
> > IDC NO 
> > DCNO 0 *
> > NDNO 0
> > DEXT NO
> > ANTK
> > SIGO STD
> > ICIS YES
> > TIMR ICF 512
> > OGF 512
> > EOD 13952
> > NRD 10112
> > DDL 70
> > ODT 4096
> > RGV 640
> > GRD 896
> > SFB 3
> > NBS 2048
> >
> >
> > PAGE 002
> >
> > NBL 4096
> >
> > IENB 5
> > TFD 0
> > VSS 0
> > VGD 6
> > DRNG NO
> > CDR NO
> > VRAT NO
> > MUS NO
> > RACD NO
> > FRL 0 0
> > FRL 1 0
> > FRL 2 0
> > FRL 3 0
> > FRL 4 0
> > FRL 5 0
> > FRL 6 0
> > FRL 7 0
> > OHQ NO
> > OHQT 00
> > CBQ NO
> > AUTH NO
> > TDET NO 
> > TTBL 0
> > ATAN NO
> > PLEV 2
> > ALRM NO
> > ART 0
> > SGRP 0
> > AACR NO
> >
> > DES VERSA
> > TN 101 01
> > TYPE TIE 
> > CDEN SD
> > CUST 0
> > TRK PRI
> > PDCA 1
> > PCML MU
> > NCOS 0
> > RTMB 1 73
> > B-CHANNEL SIGNALING
> > TGAR 1
> > AST NO
> > IAPG 0
> > CLS UNR DTN WTA LPR APN THFD HKD
> > P10 VNL
> > TKID
> > DATE 5 DEC 2005
> >
> >
> >
> > Anish Basu
> > Field Systems Engineer 
> > Softel, Inc.
> > Phone: (732) 705-9202
> > Cell: (732) 312-6634
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com>  --> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users<http://lists.digium.com/mailman/listinfo/asterisk-users>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com>
-->
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users<http://lists.digium.com/mailman/listinfo/asterisk-users> 
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com <http://Easynews.com>
--

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit: 
  http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051208/0f79b811/attachment.htm

Schochet, Wes

2005-Dec-09 10:17 UTC

head link

[Asterisk-Users] Nortel Meridian Option81C to TE405P

Yes, I have other PRIs.  problem is that there are 100 different fields to
fill in on the M1, but only 20 on the zap/asterisk side!  
 
I was able to get this going.  A few points:
 
1.  I am using the Sangoma Card - works great.
2.  I have the M1 set for USR and the Asterisk set for NET
3.  The D-Channel messages on the Asterisk side are generated by the
Asterisk application (in hindsight - duh!).  The d-channel won't come up
unless the application is running.
 
I had the clocking on the M1 set for "External" on the ADAN /
D-Channel.
The clocking on the Sangoma has two choices: "Master" and
"Normal".  I
picked "Master" because I figured the M1 would be the
"Slave" from a
clocking standpoint.  This generated a ton of errors and took me a long time
to figure out.   (Why the hell can't Nortel give you an inline description
of an error message?   After all of these years, you still get DTA0021 as an
error message!)  I changed the clock on the Sangoma to Normal and the span
came right up.
 
I may have also had a physical layer problem - maybe a bad DB15 to RJ48
converter.
 
Now I'm in dial plan and MeetMe hell - but I'll get by that too!


  _____  

From: Joe Pukepail [mailto:pukepail@gmail.com] 
Sent: Thursday, December 08, 2005 9:44 PM
To: Schochet, Wes
Subject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P


yup, is this the only PRI you have coming into your nortel?  we already had
2 other PRI's coming in so pretty much just copied the config settings from
one of the other PRIs.  What does it show if you stat the d-channel.  (I
think it is in load 96: stat dch <d channel number>).  Everything else
setup
on the nortel?  Have a clock source setup and everything? 


On 12/8/05, Schochet, Wes <wes.schochet@selectcomfort.com
<mailto:wes.schochet@selectcomfort.com> > wrote: 

Joe, are you running PRI to your Opt 11?  I have a 61 and I can;t get my
d-channel to come up to save my life!

  _____  

From: Joe Pukepail [mailto:pukepail@gmail.com <mailto:pukepail@gmail.com>
]
Sent: Thursday, December 08, 2005 9:21 AM 
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P

 

You can't use a ethernet crossover cable, make sure you are using a T1
crossover cable.  (you will definately need to use a T1 crossover cable). 
 
I'm running a Nortel Option 11 and Asterisk connected in this manner. 

 
On 12/8/05, Steve Totaro <  <mailto:stotaro@totarotechnologies.com>
stotaro@totarotechnologies.com> wrote: 


He said that he is using a crossover but for some reason I think the
crossover may be the problem.  Try making a new one.  Cross pin one with 
four and two with five.  Also try a straight through cable.  Your 
configs look fine on the asterisk side although I am not real cluefull
on the Meridian.

One question, was the Meridian ever hooked up to the PSTN? 

Thanks,
Steve
>
> This might be an obvious question, but should you be using a crossover 
> cable?
>
> Information on setting up Nortel to TDM card links can be found at:
> < http://www.pham.org/asterisk/asterisk-meridian-a1.pdf<http://www.pham.org/asterisk/asterisk-meridian-a1.pdf>
>>
> Regards,
> --
> Anthony Rodgers
> Business Systems Analyst
> District of North Vancouver
> Web: http://www.dnv.org <http://www.dnv.org/> 
> RSS Feed: http://www.dnv.org/rss.asp <http://www.dnv.org/rss.asp> 
>
>
> On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: 
>
> > Hi,
> >
> > I am having problems connecting a Nortel Meridian Option 81C PBX to
my> > Asterisk 1.20 server. We are using the TE405P card with one
crossover> > PRI 
> > T1 cable connecting the two systems. The lights on the back of the
> > TE405P
> > are green and zttool shows that the span is okay. Calls cannot be
> > made and
> > 'pri show span 1' shows the d-channel as down. If anyone has
any
> > experience
> > with this, suggestions and tips are greatly appreciatd. If we
cannot> > get
> > this resolved within the next few days, we are willing to pay
> > consulting 
> > fees for help. The config files are as listed below. Thanks for
any> > help
> > in advance.
> >
> >
> > zaptel.conf
> > -----------
> > loadzone = us 
> > defaultzone=us
> > span=1,0,0,esf,b8zs
> > bchan=1-23
> > dchan=24
> >
> > zapata.conf
> > -----------
> > [trunkgroups]
> >
> > [channels] 
> > language=en
> > switchtype=5ess
> > context=from-pbx
> > signalling=pri_net
> > group=1
> > callgroup=1
> > pickupgroup=1
> > channel => 1-23 
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > canpark=yes
> > cancallforward=yes 
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=0.0
> > txgain=0.0
> > faxdetect=both
> > musiconhold=default
> >
> > Nortel configuration: b-channel,d-channel, and route data block
> > ---------------------------------------------------------------
> > REQ prt
> > TYPE adan dch 10
> >
> > ADAN DCH 10 
> > CTYP MSDL
> > GRP 3
> > DNUM 2
> > PORT 0
> > DES VresaBridge
> > USR PRI
> > DCHL 101
> > OTBF 32
> > PARM RS422 DTE
> > DRAT 64KC 
> > CLOK EXT
> > IFC ESS5
> > SIDE USR
> > CNEG 1
> > RLS ID 1
> > RCAP ND2
> > MBGA NO
> > OVLR NO
> > OVLS NO
> > T200 3
> > T203 10 
> > N200 3
> > N201 260
> > K 7
> >
> >
> > ROUT 1
> >
> > TYPE RDB
> > CUST 00
> > ROUT 1
> > DES VERSA
> > TKTP TIE 
> > NPID_TBL_NUM 0
> > ESN NO
> > CNVT NO
> > SAT NO
> > RCLS EXT
> > VTRK NO
> > DTRK YES
> > BRIP NO
> > DGTP PRI
> > ISDN YES
> > MODE PRA
> > IFC ESS5
> > SBN NO
> > PNI 00001
> > SRVC NNSF
> > NCNA YES
> > NCRD YES
> > CHTY BCH
> > CTYP UKWN
> > INAC YES
> > ISAR NO
> > CPUB OFF
> > DAPC NO
> > BCOT 0
> > DSEL VOD
> > PTYP PRI
> > AUTO NO
> > DNIS NO
> > DCDR NO
> > ICOG IAO
> > SRCH LIN 
> > TRMB YES
> > STEP
> > ACOD 8901
> > TCPP NO
> > PII NO
> > TARG 01
> > CLEN 1
> > BILN NO
> > OABS
> > INST
> > IDC NO 
> > DCNO 0 *
> > NDNO 0
> > DEXT NO
> > ANTK
> > SIGO STD
> > ICIS YES
> > TIMR ICF 512
> > OGF 512
> > EOD 13952
> > NRD 10112
> > DDL 70
> > ODT 4096
> > RGV 640
> > GRD 896
> > SFB 3
> > NBS 2048
> >
> >
> > PAGE 002
> >
> > NBL 4096
> >
> > IENB 5
> > TFD 0
> > VSS 0
> > VGD 6
> > DRNG NO
> > CDR NO
> > VRAT NO
> > MUS NO
> > RACD NO
> > FRL 0 0
> > FRL 1 0
> > FRL 2 0
> > FRL 3 0
> > FRL 4 0
> > FRL 5 0
> > FRL 6 0
> > FRL 7 0
> > OHQ NO
> > OHQT 00
> > CBQ NO
> > AUTH NO
> > TDET NO 
> > TTBL 0
> > ATAN NO
> > PLEV 2
> > ALRM NO
> > ART 0
> > SGRP 0
> > AACR NO
> >
> > DES VERSA
> > TN 101 01
> > TYPE TIE 
> > CDEN SD
> > CUST 0
> > TRK PRI
> > PDCA 1
> > PCML MU
> > NCOS 0
> > RTMB 1 73
> > B-CHANNEL SIGNALING
> > TGAR 1
> > AST NO
> > IAPG 0
> > CLS UNR DTN WTA LPR APN THFD HKD
> > P10 VNL
> > TKID
> > DATE 5 DEC 2005
> >
> >
> >
> > Anish Basu
> > Field Systems Engineer 
> > Softel, Inc.
> > Phone: (732) 705-9202
> > Cell: (732) 312-6634
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
<http://easynews.com/>  --> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit: 
> > http://lists.digium.com/mailman/listinfo/asterisk-users<http://lists.digium.com/mailman/listinfo/asterisk-users>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
<http://easynews.com/>
-->
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users<http://lists.digium.com/mailman/listinfo/asterisk-users> 
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>
--

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit: 
    <http://lists.digium.com/mailman/listinfo/asterisk-users>
http://lists.digium.com/mailman/listinfo/asterisk-users




-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20051209/c72ec871/attachment.htm

asterisk users - Dec 2005 - Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P

[Asterisk-Users] Nortel Meridian Option81C to TE405P